An EXAFS study of the Mo/TiO2 hydrodesulphurization catalysis

In-situ EXAFS studies of sulphided Mo/TiO₂ catalysts have shown that at low Mo loadings (2–4 wt%), an active species with a short Mo-S distance of 2.25 Å is formed, while on Mo/TiO₂ with high Mo loadings as well as on Mo/-Al₂O₃, bulk MoS₂ (Mo-S, 2.42 Å) is formed. The species with the short Mo-S distance has Mo in an oxidation state close to 6 + and is likely to result from the sulphidation of the tetrahedral molybdate species present in the oxidic precursor at low Mo loadings. The calcination temperature of the oxidic precursor appears crucial, a high calcination temperature of 973 K favouring the formation of MoS₃ on sulphidation, and a low calcination temperature of 623 K favouring MoS₂.Contribution No. 790 from the Solid State and Structural Chemistry Unit.     

The reduction/oxidation behaviour of MnAPO-5 as studied by ESR spectroscopy

It is shown by ESR spectroscopy that Mn²⁺ ions in MnAPO-5 are oxidized to Mn³⁺ during calcination atT475 K. Mn²⁺ occupies variously distorted tetrahedral positions within the framework and in extra-lattice sites. Octahedrally coordinated Mn²⁺ presumably located in the channels becomes detectable after adsorption of water. The ESR spectra of reduced MnAPO-5 show line-narrowing due to spin exchange interactions. The material behaves reversible in redox cycles at temperatures near 500 K.     

求解0-1背包问题的混合贪婪遗传算法

求解0-1背包问题（KP）的最优解的时候,传统遗传算法（GA）的局部求精能力不足而简单局部搜索算法的全局探索能力有限,针对上述问题,将这两个算法整合并提出了混合贪婪遗传算法（HGGA）。在GA全局搜索框架下增加局部搜索模块,并改进传统仅基于物品价值密度的修复算子,增加基于物品价值的贪婪混合选项,从而加速寻优过程。HGGA一方面引导种群在进化的优质解空间中展开精细搜索,另一方面依靠GA的经典操作算子开拓全局搜索空间,从而达到算法求精能力和开拓能力的良好平衡。HGGA分别在三组数据上做了测试,结果表明在第一组15个测试用例中的12个上,HGGA能够百分百找到最优解,成功率达到80%;在第二组小规模数据集上,HGGA的性能明显好于其他同类GA和其他元启发算法;在第三组大规模数据集上,HGGA较其他元启发式算法具有更好的稳定性和高效性。     

基于NOMA的5G超密网计算迁移与资源分配策略

针对5G超密网中移动设备计算能力不足、频谱资源有限的问题,提出了一种基于非正交多址接入（NOMA）的计算迁移与带宽分配策略。首先,对系统模型进行了分析,并在此基础上以最小化设备计算代价为目标对所研究的问题进行形式化定义;然后,将该问题分解成设备的计算迁移、系统的带宽分配和设备的分组匹配三个子问题,并利用模拟退火、内点法和贪心算法对这三个子问题进行求解;最后,通过联合优化算法对上述子问题进行交替性迭代求解,最终获得最优计算迁移和资源分配策略。仿真结果表明,所提出的联合优化策略不但优于传统的正交多址接入（OMA）方式,而且能获得比平均分配带宽的NOMA技术更低的设备计算代价。     

Python爬虫在导购系统中的应用

近年来,随着互联网的发展,出现了网上购物这种全新的购物方式。网上购物已经成为年轻人购物的主要方式。但网上的商品琳琅满目,如何挑选物美价廉的商品成为需要解决的问题,由此设计了一个基于Python爬虫的优惠券型导购系统。将淘宝、天猫、京东三大电商网站作为数据源,使用Python的requests、selenium等模块结合IP代理反反爬虫技术将商品信息与优惠券信息爬取下来,对信息进行数据清洗并存入mongo DB数据库中,由后台服务器程序整理数据,并在基于HTML5的安卓端APP展示出来供用户查看与选择。该系统简单高效,可以改善用户的购物体验,具有较高的实用价值。     

基于稀疏强特征提取的三维地震数据完备方法

随着复杂储层地震资料特征筛选的机器学习技术的进步,如何有效地对参与地震属性优选和储层反演的地震样本进行采集和分析,成为目前智能地震预测领域的一个研究热点。目前的方法多着重于模型分类算法的改进,在标签的制作和采集方面不仅耗费大量时间进行人工标注,还存在标签不平衡情况下类内可靠性、类间平衡性不强等问题。为此,提出基于稀疏强特征提取的三维地震数据完备方法。首先,基于多数决原则的样本分割(Sample Segmentation Based on Majority Rule, SSMR)寻迹多尺度、多标签三维地震样本,进行采集、自动标注;然后,改进标签洗牌平衡方法(Improved Label Shuffling Balance Method, ILSB),通过“2+1”的样本增广平衡策略进行数据完备处理,改善样本采样不平衡性导致的模型训练偏向性;最后,利用基于最小L₁范数稀疏表示对奇异值分解结果进行强特征提取(Minimum L₁-norm Based Sparse Representation for Feature Extraction, L     

5Cr套管钢在不同CO2分压下高温高压腐蚀特性研究

为了研究5Cr套管钢在不同CO₂分压下的腐蚀特性,进行了5Cr套管钢高温高压腐蚀失重和高温高压电化学试验,并采用XRD、SEM和EDS等手段对其腐蚀产物进行微观分析。结果表明,在高温高压腐蚀环境下随着CO₂分压从低到高,其表面点蚀坑的深度和直径均无明显变化,而点蚀速率则出现逐渐减小的趋势;其腐蚀产物膜由Cr(OH)₃、FeCO₃和CaCO₃共同组成,且随着CO₂分压的升高Cr的富集量逐渐增加;在电化学测试中,随着CO₂分压的不断升高,5Cr套管钢表现出半钝化特征,产物膜逐渐增厚且致密,且极化电阻逐渐增大,阳极反应受到抑制,电化学反应阻力增大,其抗局部腐蚀能力不断提高。     

直缝焊管焊缝质量电磁超声检测方法研究

为实现直缝焊管焊缝内缺陷检测,采用周向电磁超声SH0导波检测技术,研究了基于磁致伸缩效应激励周向SH0模态导波,确定了周向SH0导波激励频率,设计了一款一发双收差分接收的直缝焊管焊缝缺陷检测探头。结果表明:该系统能够激发单一模态周向SH0导波,实际波速与模型分析结果吻合;针对直径116 mm、壁厚3.5 mm的激光直缝焊管焊缝的Φ0.6 mm盲孔和Φ1.0 mm通孔,通过差分探头的信号处理,能够实现焊缝处Φ1.0 mm通孔和Φ0.6 mm盲孔缺陷的检测。     

Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

Effect of binder-phase modification and Cr3C2 addition on properties of WC-IOC0 cemented carbide

For production of fine-grained and corrosion-resistant tungsten carbide (WC) based cemented carbides, addition of chromium carbide (Cr₃3C₂) in small amounts is standard practice. No systematic study, however, has been made of the effects of large additions (maximum 6 wt % ) of Cr₃C₂ as a substitute for tungsten carbide. This study focuses on the effect of hard-phase substitution by C₃C₂ in WC-1OCo cemented carbide. An attempt is also made to modify the binder metal cobalt by partial or complete substitution of nickel. Specimens were prepared using the standard liquid-phase sintering process and were tested for sintered porosity, mechanical properties, corrosion resistance, and microstructural parameters. Results confirm the findings of earlier workers regarding grain refinement and improvement of mechanical properties upon the addition of small amounts (<2 wt%) of Cr₃C₂. Modification of the binder phase improves indentation fracture toughness and corrosion resistance. Addition of Cr₃C₂ independent of the binder type improves corrosion resistance.