Extraction of 2-hydroxyphenol by surfactant coated nanosized magnetic particles

A colloidal suspension of magnetic particles coated with double layer surfactant molecules was prepared, characterized and used for separation of some chemicals. The aqueous magnetic fluid was prepared by chemical precipitation method and characterized by total organic carbon analyzer (TOC), thermogravimetric analysis (TGA) and transmission electron microscopy (TEM). The TOC and TGA measurements indicate that the prepared magnetic particles are coated with surfactant molecules in double layers. The outer surfactant layer has free polar heads. TEM measurement results show that magnetic particles are nanosized. A mixture of 2-hydroxyphenol (strong polar) and 2-nitrophenol (weak polar) was chosen as the target system. Results show that the magnetic fluid can selectively adsorb 2-hydroxyphenol from the mixture, whereas the adsorption of 2-nitrophenol is insignificant. For 2-hydroxyphenol, the adsorption equilibrium can be described well by Langmuir isotherm, and the adsorption kinetic can be fitted well by a linear driving force mass transfer model.     

磁力驱动器涡流损失的研究

对磁力驱动器金属隔离套在交变磁场中引起的涡流损失进行了理论计算 ,并与实测结果进行了对比。指出合理选择金属隔离套的相关参数 ,可以有效控制涡流损失的大小     

Surface-initiated atom transfer radical polymerization of methyl methacrylate on magnetite nanoparticles

The synthesis of magnetite nanoparticles coated with a well-defined graft polymer is reported. The magnetite nanoparticles with an initiator group for copper-mediated atom transfer radical polymerization (ATRP), 2-(4-chlorosulfonylphenyl) ethyltrichlorosilane (CTCS) chemically bound on their surfaces were prepared by the self-assembled monolayer-deposition method. The surface-initiated ATRP of methyl methacrylate (MMA) was carried out with the CTCS-coated magnetite nanoparticles in the presence of free (sacrificing) initiator, p-toluenesulfonyl chloride. Polymerization proceeded in a living fashion, exhibiting first-order kinetics of monomer consumption and a proportional relationship between molecular weight of the graft polymer and monomer conversion, thus providing well-defined, low-polydispersity graft polymers with an approximate graft density of 0.7 chains/nm². The molecular weight and polydispersity of the graft polymer were nearly equal to those of the free polymer produced in the solution, meaning that the free polymer is a good measure of the characteristics of the graft polymer. The graft polymer possessed exceptionally high stability and remarkably improved dispersibility of the magnetite nanoparticles in organic solvent.     

制备Fe_4N磁粉的优化工艺研究

本文是在固定床反应器中由γ-Fe2O3制备Fe4N磁粉优化工艺的实验研究，通过正交试验法得出了获得高质量Fe4N磁粉的优化工艺参数．     

THE EFFECT OF A MAGNETIC FIELD ON NATURAL CONVECTION IN A SHALLOW CAVITY HEATED FROM BELOW

A numerical study is presented for magnetohydrodynamic free convection of an electrically conducting fluid in a shallow cavity heated from below and cooled from above. The side walls are maintained adiabatic. A uniform magnetic field, inclined with an angle 0 with respect to the horizontal plane, is externally imposed. The investigation covers the range of the Rayleigh number, Ra, from 1.8 × 10₃ to 3 x 10₄the Hartmann number, Ha, from 0 to 35, the Prandtl number, Pr, from 0.005 to 1 and aspect ratio of the cavity, A = 6. The effect of the magnetic field on the flow structure is presented. For supercritical convection it is found that, upon increasing Ha, the number of roll cells in the cavity increases when it is perpendicular to it. The imposition of an inclined magnetic field gives rise to new flow patterns with tilted lateral cell walls. The effect of both strength and orientation of the magnetic field on the overall heat transfer is found to be significant.     

储罐罐底板漏磁检测仪的研制

在研究漏磁场原理的基础上，设计了一种罐底板漏磁检测仪。该仪器对罐底板的检测不受表面油污和其它非导磁材料影响，具有速度快、性能可靠、操作方便等特点，是全面检测整个罐底板的有效手段。     

磁场作用下铁在盐酸和氯化钠溶液中自腐蚀状态的变化

采用自腐蚀电位测量及恒电位极化法研究了磁场对铁在酸性与中性氯化的溶液中自腐蚀状态的作用。外加磁场使自腐蚀电位正移，撤去磁场使自腐蚀电位负移，没有磁场时在自腐蚀电位下极化然后外加磁场会导致磁致阴极电流；有磁场时自腐蚀电位下极化然后撤去磁场会导致磁致阳极电流。酸性溶液体系的磁致阴极电流值明显大于中性溶液体系，表现出磁场主要通过作用于析氢反应而影响自腐蚀状态。     

250m/s超高速磨床主轴磁浮轴承设计

本文介绍了磁浮轴承的优点，并针对一台250m/s超高速磨床主轴系统，首次进行了磁浮轴承设计，其结果对我国发展高速主轴技术有一定意义。     

基于三维有限元动态模拟圆柱形表面腐蚀缺陷漏磁场

根据电磁场有限元分析的基础理论，对储罐底板圆柱形表面腐蚀缺陷，应用ANSYS三维有限元静态分析了圆柱形表面腐蚀缺陷漏磁场，得到了圆柱形表面腐蚀缺陷漏磁场的空间分布。在一定条件下，静态模拟的缺陷漏磁场受励磁结构中永磁铁磁场的影响较大，造成在永磁铁附近漏磁场分布的畸变。而动态模拟下得到的漏磁场只在缺陷附近有明显的变化，缺陷漏磁场受励磁结构中永磁铁磁场的影响很小，有利于对腐蚀缺陷的分析。