乙醇电氧化的研究进展

简要地叙述了国内外乙醇电催化氧化的研究进展，着重介绍不同电极材料对乙醇电氧化的影响及目前所提山的机理，并对其可能的研究方向提出了建议。     

Proton and hydrogen formation by cyclohexyl benzene during overcharge of Li-ion batteries

This study provides experimental evidence for proton and hydrogen formation caused by the anodic electropolymerization of cyclohexyl benzene (CHB), which is a popular electrolyte additive for overcharge protection of lithium-ion batteries (LIBs). It is found that considerable H₂ evolution is observed in overcharged LiCoO₂/graphite cells, especially when CHB is included as an electrolyte additive. In order to confirm the proton generation during the CHB oxidation, Pt/Pt-rotating ring disc electrode (RRDE) measurements are performed in 1 M Li(C₂F₅SO₂)₂N ethylene carbonate/ethyl methyl carbonate (1/2, v/v) solutions with and without CHB. The cathodic ring current is intimately correlated to the anodic disc current, and the cathodic reaction at the ring is determined to be the reduction of the proton. The proton generation efficiency during the CHB oxidation is as high as 90%. Proton liberation is also observed during the anodic decomposition of the electrolyte solvents, although it occurs in a much less stoichiometric way compared with that during the CHB oxidation.     

APDT-00三极放电管全自动打印机的研制

介绍了新近研制的APTD - 0 0三极放电管全自动打印机的结构特点及整机设计的关键技术 ,阐述了自动上料机构、打印机构和控制电路的设计     

Ti基MnO_x型DSA析氧电极材料的性能

本文报导了新型 Ti/SnO_2+MnO_x+RuO_2/MnO_x(DSA)电极材料的各种性能,其中包括电极的导电性、表面粗糙度、电化学活性表面积、析氧阳极特性等,并用 X 射线衍射法进行了物相分析、用 SEM观察了表面形貌。确认该电极性能良好,加之成本较低,可作为酸性介质中的析氧电极材料。     

Influence of heat transfer on anodic oxidation of aluminium

The influence of convective heat transfer on constant current density anodizing of aluminium in sulfuric acid has been examined in a wall-jet electrode reactor. The uniformity of the anodic film thickness is related to the local electrode temperature distribution, which is dependent on the convection. The higher the local temperature, the greater the local oxide thickness. An increased local temperature enhances local field assisted oxide dissolution at the pore bases, and consequently acts to increase the local current density. At relatively high current densities, local features develop on the electrode surface, accompanied by high initial, local temperature rises. The relevance of such local features, limiting useful oxide growth, is considered further.     

Charge transfer resistance of spray deposited and compressed counter electrodes for dye-sensitized nanoparticle solar cells on plastic substrates

Electrochemical impedance spectroscopy was used to determine the effective charge transfer resistances of porous dye-sensitized solar cell counter electrodes prepared by low-temperature spray deposition and compression of conductive carbon and platinized Sb-doped SnO₂ powders on indium tin oxide-coated plastic substrates. The charge transfer resistances were 0.5–2 and 8–13 Ω cm², respectively, when using 3-methoxypropionitrile as the electrolyte solvent. The manufacturing method used lends itself to produce mechanically stable and even-quality electrodes in an easy and fast manner.     

NiCuZn铁氧体和银内电极的共烧行为

NiCuZn铁氧体正作为磁介质广泛地应用于低烧多层片式电感，因此有必要对其与银内电极的共烧行为进行研究。该文主要介绍NiCuZn铁氧体／银内电极多层复合体共烧过程中的烧结收缩、界面反应、扩散对介质性能的影响。尖晶石结构中存在相当数量的空位，这为银离子提供了一定的溶解度，因此在共烧过程中银对铁氧体的相组成影响较小。银对铁氧体性能的影响体现在两个方面。一方面是由于银具有相对低的烧结温度，从而在烧结过程中起到助烧剂的作用，促进致密化过程，提高烧结体的密度和磁导率；另一方面，银促使铁氧体中的铜在晶界处析出，导致晶界处应力，使磁导率降低，晶粒生长也被一定程度地抑制。     

系列尼古丁PVC膜选择性电极的研制

以尼古丁为研究对象 ,研制了一系列含有不同增塑剂 (苯二甲酸二辛酯、苯二甲酸二壬酯和癸二酸二辛酯 )和电活性物质 (尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物和尼古丁 雷氏盐缔合物 )的PVC膜电极。所有的 8支电极均对尼古丁盐酸溶液有Nernst响应。所制备的电极中 ,以尼古丁 四苯硼缔合物、尼古丁 硅钨酸缔合物、尼古丁 磷钨酸缔合物或尼古丁 雷氏盐缔合物为活性物的电极 ,其线性范围达到 10 - 4～ 10 - 1 mol/L ,以尼古丁 硅钨酸缔合物为活性物的电极线性范围达到 10 - 5～ 10 - 1 mol/L。电极响应的均匀性还在进一步的研究和改善中     

Investigation of electrode and hydrogen induced crack in welded joint of dissimilar steel

The welded joint of dissimilar heat-resisting steels 20Crl2MoV(F12)and 12 Cr2MoWVTiB(102)generally works around 600°C.In this paperthree kinds of ferritic electrodes are used for testing.They are R817 high-strength electrode(CrllMoVNi),R347 low-strength electrode(Cr2MoVWB)and newly-developed R507MoNb medium-strength electrode.The study on theinfluence of those three different electrodes on carbon migration,HIC and hy-drogen diffusion shows that medium-strength electrodes can well control thecarbon migration,and that the tendency to HIC in the joint formed by R817 issmaller than that by R347 instead.Considering the effect of weld metal transfor-mation on the restraint stress and hydrogen concentration of a joint,the hydro-gen distribution in the heat-affected zone(HAZ)is calculated by using finite ele-ment method(FEM)with stress and strain changing,and so the effect of thetransformation behaviour on HIC is revealed.In addition,newly-developedR507MoNb electrodes,tested the elevated-temperature property,oxidation re-sistance and creep rupture strength,have fulfilled the technical standards con-cerned and passed the examination of on-the-spot operation.     

Effects of thermal oxidation conditions of silicon electrodes on cathodic electrochemiluminescence of Ru(bpy)3 chelate

Hot electrons emitted from thin oxide film-coated heavily doped silicon electrodes by cathodic pulse polarization can induce electrochemiluminescence from luminophores. The intensity of electrochemiluminescence produced at the electrode surface is dependent on the features of thin oxide films formed by thermal oxidation. As a preliminary study, we investigated the effect of thermal oxide growth conditions on the intensity of electrochemiluminescence produced at these electrodes, such as oxidation atmospheres, oxidation temperature, oxidation time and pre-treatment of wafers, using ruthenium(II) tris-(2,2′-bipyridine) chelate as a model luminophore. Optimal oxidation conditions of heavily doped silicon electrodes were obtained for the generation of intense electrochemiluminescence at this kind of silicon electrodes.