Reducing energy-related CO2 emissions using accelerated weathering of limestone

The use and impacts of accelerated weathering of limestone (AWL; reaction: CO₂+H₂O+CaCO₃→Ca²⁺+2(HCO₃⁻) is explored as a CO₂ capture and sequestration method. It is shown that significant limestone resources are relatively close to a majority of CO₂-emitting power plants along the coastal US, a favored siting location for AWL. Waste fines, representing more than 20% of current US crushed limestone production (>10⁹ tonnes/yr), could provide an inexpensive or free source of AWL carbonate. With limestone transportation then as the dominant cost variable, CO₂ mitigation costs of $3-$4/tonne appear to be possible in certain locations. Perhaps 10–20% of US point–source CO₂ emissions could be mitigated in this fashion. It is experimentally shown that CO₂ sequestration rates of 10⁻⁶ to 10⁻⁵ moles/sec per m² of limestone surface area are achievable, with reaction densities on the order of 10⁻² tonnes CO₂ m⁻³day⁻¹, highly dependent on limestone particle size, solution turbulence and flow, and CO₂ concentration. Modeling shows that AWL would allow carbon storage in the ocean with significantly reduced impacts to seawater pH relative to direct CO₂ disposal into the atmosphere or sea. The addition of AWL-derived alkalinity to the ocean may itself be beneficial for marine biota.     

Excavation of Inlet Tunnels at Geheyan Power Station

1　ＯｖｅｒｖｉｅｗＴｈｅＧｅｈｅｙａｎＰｏｗｅｒＳｔａｔｉｏｎｈａｓｆｏｕｒｃｉｒｃｕｌａｒｉｎｌｅｔｔｕｎ ｎｅｌｓ，ｏｎｔｈｅｒｉｇｈｔｂａｎｋｏｆｄａｍｓｉｔｅ，ｗｉｔｈｔｈｅｉｒｅｘｃａｖａｔｉｏｎｄｉ ａｍｅｔｅｒｏｆ 11．3ｍｔｏ 12．5ｍ，ａｆｔｅｒ ｌｉｎｉｎｇｄｉａｍｅｔｅｒｏｆ 9．5ｍ，ａｘｉｓ ｔｏ ａｘｉｓｓｐａｃｉｎｇｏｆ2 4ｍ．Ｔｈｅｔｈｉｃｋｎｅｓｓｏｆｐｉｌｌａｒｓａｒｅｅｑｕａｌｔｏｔｈｅｔｕｎｎｅｌｄｉａｍｅｔｅｒ．Ｔｈｅｉｎｔａｋｅｃｅｎｔｅｒｉｓａｔｅｌｅｖａ ｔｉ…     

秦山300MW核电机组全范围仿真机测试验收

介绍了秦山３００ＭＷ核电机组全范围仿真机的测试验收的整个过程，包括：验收测试规程的形成，工厂内部预测试和工厂用户测试。并分析了测试验收过程中存在的重大问题及解决的办法。     

Analytical Expression of the Threshold Pump Power of Erbium—doped Fiber Laeers Pumped at 980 nm and 1480nm Wavelengths

The rate equations,which is suiable to erbium-doped fiber lasers pumped at 980 nm and 1480 nm wavelengths respectively,are investigated,and analytical ex-pressions of the threshold pump powers under two pump wavelengths are derived.As a result,some important parmeters can be quantitatively specified.     

一种新型无突变自动高压电源

本文介绍一种新型高压直流电源，它的输出高压的提升、下降均自动、无级、缓慢地变化，无突变现象，尤其在电网供电突然中断时，也能使用高压自动、缓慢地下降到０。它用于半导体放射性射线探测器，可以避免由于操作的粗心或电网供电突然中继引起高压快速变化或而产生的对该类昂贵探测器及其附件的损害，使探测器的优良性能得以保持。     

智能化红外焊缝检测仪的实时信号自相关分析

详细介绍了在改进红外焊缝检测仪的过程中实时信号的一种抗干扰方法－－自相关方法。重点离自相关方法的数学模型，软件框图及设计思想，并给出了实验结果。     

单周期控制Boost—PFC基于Saber的设计与仿真

单周期控制策略简单可靠,动态响应速度快,能很好地抑制输入电压扰动和负载突变。本文阐述了单周期控制Boost—PFC的工作原理,对单周期控制Boost—PFC进行了基于Saber软件的CAD设计和仿真。仿真结果表明,单周期控制适用干Boost变换器,能够实现功率因数校正。     

电力工程中的地质灾害危险性评估

我国幅员辽阔,地质环境条件多样且复杂,导致了地质灾害发育强烈,种类繁多、危害较大。地质灾害与工程建设活动密切相关,既相互作用,相互依存,又相互影响[1]。电力工程项目遍布全国,特别是输电线路大多为人烟稀少的山区分布,线路长,跨越的地质地貌区域复杂,存在的地质灾害多种多样,或多或少面临着各种地质灾害的严重威胁[2]。通过电力工程地质灾害危险性评估工作的现状及评估工作流程的介绍,进一步分析电力工程地质灾害的危险性评估工作中存在的问题并提出了相应的看法。     

混合集总—分布参数微波功率分配器的机助设计

在本文中,将微波功率分配器看做用多个两端口网络构成的多端口匹配网络,用集总与分布参数元件混合组成的模块来综合这种网络,从而得到了一种新型的混合集中分布参数微波功率分配器及其机助设计方法。     

基于STM32的逆变弧焊电源控制器设计

数字化是弧焊电源的发展趋势,其关键在于控制器的数字化。目前市场上的大多数数字化产品价格相对高昂,采用STM32系列单片机进行经济型数字化弧焊电源控制器的设计和实现。该控制器采用数字式PI方法进行输出电流控制,并具有按键操作、液晶显示、过流保护、过热保护等功能。该控制器还具有良好的扩展I}生,可以通过修改程序增强系统功能。