高技术产品用无源元件与中国钽工业发展

世界高技术产品市场总体看呈增长趋势，预计2020年销售额将比2000年翻一番。以高技术产品为主要应用领域的电阻、电容、电感等无源元件，也将随着高技术产业的发展呈现出良好的市场前景，但是钽电容器市场近几年表现出骤涨急落的发展态势。由于钽电容器产能过剩，且面临着被替代的威协，因此价格将无法返回到2000年以前的水平，并呈现整体持续走低的趋势。中国的钽工业发展应注重提高企业自身的综合竞争力，加强企业间的沟通、交流与合作，维护我国钽工业的整体利益，增强环保意识，做好国外转移到我国的初级产品和低端产品生产的环保工作。     

电解电容器铝箔纯交流腐蚀工艺影响因素的研究

对电解电容器铝箔交流腐蚀体系中各影响因素的研究结果表明，在电流密度为０．５Ａ／ｃｍ２，温度为４７±２℃；控制腐蚀液中Ａｌ（３＋）含量及适量添加表面保护剂和辅助添加剂的条件下，可获得最大比电容。通过循环伏安曲线测试，探讨了各因素影响腐蚀的机理及相互关系。     

电感电容损耗电阻的讨论

通过对电容电感阻抗的测量，发现实验值偏离理论值。定性地分析了误差的来源，得出的结论是电感电容内部的损耗电阻随着频率的变化而变化，变化方向相反而并非相同。     

中国的钛工业概况

对近年来轻水反应堆用锆合金材料的发展及其应用研究中一些主要技术问题和标准要求进行了综合述评。     

筒形件强力旋压新技术--浮动芯模法

提出了一种新的旋压方法－浮动芯模法。该方法采用的芯模长度尺寸较小,两端不固定加工,制造和安装非常容易。由于该方法是采用旋轮不动,工件做轴向运动,故解决了正旋所带来的工件扭曲的问题。此法用于加工长管类件,更显示出它的优越性,对改善管类件的加工具有重要的意义。     

使用人工神经网络对强力旋压有限元模拟进行参数预选

在筒形件强力旋压领域内，介绍了使用人工神经网络的手段，在MARC有限元模拟的前处理中实现参数预选的方法。作为与有限元模拟相结合的旋压智能化设计的一项关键技术，能够达到减少有限元模拟的误差和工作量的目的。     

EXPERIMENTAL STUDY ON MIXING: POWER CONSUMPTION AND DEGREE OF SUSPENSION

An experimental study on mixing, degree of suspension and power consumption in solid-liquid suspensions was done. A system similar to those found in anaerobic fermentation processes of animal manures was used, and an existing mixing equipment was adapted for the study. Power consumption and degree of suspension for both mechanical mixing and mixing by gas was determined. The influence of variables such as geometry, solids concentration, stirrer velocity, and gas velocity was studied, discussed, and compared to data from the literature. Best results were obtained for gas mixing, the power consumption being about one fourth of that required by mechanical agitation. Finally, extended correlations relating Power and Reynolds numbers for mechanical mixing and mixing by gas are proposed.     

电泳涂料

本文介绍了电泳涂料及发展趋势。     

Electrical double layer characteristics of nanoporous carbon derived from titanium carbide

Electrochemical parameters of the nanoporous carbide-derived carbon|organic electrolyte have been studied by cyclic voltammetry and electrochemical impedance spectroscopy. The gas adsorption measurements have been used for evaluating the specific surface area, pore size distribution and porosity as the essential parameters influencing the double layer performance of carbon. The region of ideal polarizability, values of series and parallel resistance, capacitance and other important electrical double layer parameters were established. It was shown that specific capacitance of typical nanoporous carbon derived from titanium carbide is in the range of 70-90 F cm⁻³ or 100-130 F g⁻¹ and it depends on the synthesis conditions. The influence of the electrolyte solvent to the capacitance was insignificant, although acetonitrile was advantageous with respect of smaller viscosity.     

铝电解电容器用新型宽温高压工作电解液

采用异癸二酸铵为主溶质,乙二醇和γ-丁内酯为复合溶剂,制备新型宽温(-40~105℃)、高压(400 V)铝电解电容器工作电解液,并检测了该电解液和用该电解液生产的电解电容器的性能。测试结果表明,该工作电解液25℃时电导率达到1.6 mS/cm,闪火电压为480 V,-40℃下未见晶体析出;CD 110/400 V铝电解电容器试样的漏电流≤10μA,损耗0.03,容量变化率只有-3%。经过105℃高温贮存250 h后各项电气性能不仅优于国家标准,而且能达到严格的企业标准。