基于电力载波通信的远程路灯监控系统设计

设计了一种基于atmega162单片机和电力载波芯片LME2200C的路灯监控系统。采用单片机实时监控路灯的运行情况,并通过电力线进行数据传输,实现了对路灯的远程监控和管理;实际测试结果表明,系统在一定距离内可以取得良好的效果。     

基于C8051F020的时间分辨荧光光谱测硼仪设计与实现

采用C8051F020研制了时间分辨荧光光谱测硼仪,以C8051F020为核心控制器;输出PWM信号控制脉冲光源发出激发光,使用ADC转换模块采集物质中硼元素发出的荧光信号,并根据采集到的数据,调整DA输出信号控制光电倍增管的负高压电源,使光电倍增管输出电流在合理范围内,从而提高采集数据的精度和准确度。通过RS232与PC通信,传送采集到的荧光信号数据至PC供后续处理。使用键盘和液晶显示屏,人机界面友好。实验表明,由于采用模块化设计,结构灵活,扩展性强,性价比高,具有很强的实用性。     

Quality assurance of PASADENA hyperpolarization for 13C biomolecules

Object  Define MR quality assurance procedures for maximal PASADENA hyperpolarization of a biological ¹³C molecular imaging reagent. Materials and methods  An automated PASADENA polarizer and a parahydrogen generator were installed. ¹³C enriched hydroxyethyl acrylate, 1-¹³C, 2,3,3-d₃ (HEA), was converted to hyperpolarized hydroxyethyl propionate, 1-¹³C, 2,3,3-d₃ (HEP) and fumaric acid, 1-¹³C, 2,3-d₂ (FUM) to hyperpolarized succinic acid, 1-¹³C, 2,3-d₂ (SUC), by reaction with parahydrogen and norbornadiene rhodium catalyst. Incremental optimization of successive steps in PASADENA was implemented. MR spectra and in vivo images of hyperpolarized ¹³C imaging agents were acquired at 1.5 and 4.7 T. Results  Application of quality assurance (QA) criteria resulted in incremental optimization of the individual steps in PASADENA implementation. Optimal hyperpolarization of HEP of P = 20% was achieved by calibration of the NMR unit of the polarizer (B ₀ field strength ± 0.002 mT). Mean hyperpolarization of SUC, P = [15.3 ± 1.9]% (N = 16) in D ₂O, and P = [12.8 ± 3.1]% (N = 12) in H ₂O, was achieved every 5–8 min (range 13–20%). An in vivo ¹³C succinate image of a rat was produced. Conclusion  PASADENA spin hyperpolarization of SUC to 15.3% in average was demonstrated (37,400 fold signal enhancement at 4.7 T). The biological fate of ¹³C succinate, a normally occurring cellular intermediate, might be monitored with enhanced sensitivity.     

基于嵌入式智能监控系统的IO直控云台结构

本文分析了现有数宇监控系统中的云台控制法,该方法基于派尔高协议通过串口间接控制云台：提出了基于智能监控系统的嵌入式IO直控云台结构,并结合S3C2440处理器设计了硬件结构、编写了嵌入式LinuX操作系统下的驱动程序。     

基于STC12C系列单片机的DS18B20编程

针对新一代高性能单时钟／机器周期的STC12C系列单片机由于执行速度远高于传统的51单片机而不能直接使用原有单片机程序的问题,采用Keil软件的性能分析器来计算Atmel单片机的执行时间;通过手工计算修改程序段的执行时间,使STC12C系列单片机的执行时间满足数字温度传感器DS18B20的时序要求。测试结果表明STC12C2052能正确读取DS18B20的温度转换值,此方法对于具有时序要求的可编程器件的使用具有一定的参考价值。     

改进模糊划分聚类的协同过滤推荐算法

针对传统协同过滤（CF）推荐算法存在评分矩阵稀疏、扩展性弱和推荐准确率低的缺陷，提出一种改进模糊划分聚类的协同过滤推荐算法（GIFP-CCF+）。在传统基于修正余弦相似度计算方法上，引入时间差因子、热门物品权重因子以及冷门物品权重因子以改善相似度计算结果；同时引入改进模糊划分的GIFP-FCM算法，将属性特征相似的项目聚成一类，构造索引矩阵，同索引间根据项目间的相似度寻找项目最近邻居构成推荐，从而提高协同过滤算法（CF）的精度。通过与Kmeans-CF、FCM-CF和GIFP-CCF算法进行仿真对比实验，证明了GIFP-CCF+算法在推荐结果和推荐精度上具有一定的优越性。     

基于C8051F310及D2174QN的误码测试仪的设计与实现

误码测试仪是用于测量数据传输设备及其信道工作质量的一个重要仪器。是通信系统可靠性的测量工具,误码测试仪广泛地应用于通信设备的生产调试、检验以及日常维护等方面。根据此功能研究并设计了一种基于C8051F310及DS2174QN的误码测试仪,详细地分析和介绍了各个模块的工作原理。     

The analysis for morphological evolution and crystallography of degenerate pearlite in 100Mn13 steel

During approximate 773 K aging treatment of 100Mn13 steel, degenerate pearlite will occur and evolve into lamellar pearlite during growth process. The microstructures of degenerate pearlite and its evolutionary lamellar pearlite are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that after 748 K, 773 K and 798 K aging, degenerate pearlites occur at grain boundary. At growth front of degenerate pearlite forming at 773 K and 798 K, pearlite presents a morphology of short lamellae of carbide and ferrite, indicating a trend of developing into lamellar pearlite. The higher the temperature is, the more obvious the trend is, and even a conventional lamellar pearlite has developed. However, there is no morphological evolution for degenerate pearlite forming at 748 K aging. Besides, the constituents of degenerate pearlite is identified as M₂₃C₆ and ferrite, and Kurdjumov-Sachs orientation relationship exists between them, (01 )_α//( 1 )_M23C6, [111]_α//[110]_M23C6. This orientation relationship maintains in morphological evolution from degenerate pearlite to lamellar pearlite.     

当归红芪超滤物对重离子12C6+辐射肝癌细胞DNA损伤修复的影响

将人肝癌H22细胞分成4组,分别为对照组、药物组(100 mg/L)、辐射组(2 Gy)及联合组(100 mg/L药物 + 2 Gy照射),采用CCK-8法、单细胞凝胶电泳、γ-H2AX免疫荧光原位杂交技术以及Western Blotting印迹法,研究当归红芪超滤物(Radix Angelicae Sinensis and Radix Hedysari, RAS-RH)对重离子¹²C⁶⁺辐射引起人肝癌H22细胞DNA损伤修复的影响和其可能的机制。结果表明,在0～72 h和给药剂量为5～200 mg/L范围内,RAS-RH对人肝癌H22细胞的增殖抑制作用具有时间和剂量依赖性,其20%抑制浓度IC₂₀为(117.6±2.15)mg/L;单细胞凝胶电泳显示联合组头部DNA含量低于辐射组,而尾部DNA含量、尾距TM、Olive尾距OTM均高于辐射组;γ-H2AX免疫荧光原位杂交技术发现RAS-RH不增加重离子¹²C⁶⁺辐射引起的DNA损伤,但在2—12 h,DNA双链断裂的γ-H2AX foci修复作用被RAS-RH抑制,DNA损伤持续存在;Western Blotting显示RAS-RH通过下调Ku70/80及Rad51的蛋白表达,抑制γ-H2AX的聚集。以上结果说明RAS-RH对人肝癌H22细胞的辐射增敏作用可能是下调DNA损伤修复相关因子Ku70/80及Rad51的表达。     

μC/OS-II的应用设计

本文在研究TMS320LF2407结构及编程特点的基础上,详细讨论μC/OS-II的移植过程,主要分析移植中可能出现的问题,给出解决方法,并编写了一个应用软件来测试该系统移植的正确性。