Removal of Arsenic(III), Chromium(III) and Iron(III) Traces from Hydrofluoric Acid Solutions by Specialty Anion Exchangers

The removal of As(III), Fe(III), and Cr(III) at trace levels from HF solutions by means of specialty ion exchange resins has been investigated. These impurities are usually found in technical‐grade HF, and they need to be removed to prepare metal‐free HF for the semiconductor industry. It was assumed that Fe(III) and As(III) species in dilute HF were present in anionic form, while Cr(III) was probably in neutral form, CrF₃. First, a selection of specialty ion exchangers was performed. Then, fixed‐bed experiments were carried out to check the ability of selected resins to reach the impurity levels required in SEMI C29 for 5 wt.% HF (5 ppb of As, and 10 ppb of Cr and Fe). The effect of the flow rate and the HF concentration on the metal removal was studied with Purolite D‐3777 and Fuji PEI‐CS‐07 resins respectively. Fuji PEI‐CS‐07 showed the best performance for Fe(III) removal, even at high HF concentration (25 wt.%). A strong decrease in the Cr(III) and As(III) removal capacity with increasing concentration of HF was observed.     

燃气轮机在焦炉煤气发电中的应用

介绍了利用焦炉煤气发电的方法及燃气轮机发电的原理和机组结构,简述了焦炉煤气的前置处理系统和烟气脱硝系统。利用燃气轮机发电可综合利用焦炉煤气,是比较合适的发电方式。     

重组人EC-SOD包涵体的稀释复性及重折叠后蛋白的纯化

目的确定重组人ECSOD包涵体体外稀释复性和复性后蛋白纯化的适宜方法。方法通过对pH、温度、包涵体蛋白浓度、尿素和精氨酸浓度及氧化还原对比率的定性定量分析,研究重组人ECSOD包涵体体外稀释复性的基本条件。采用金属离子亲和柱(IMAC)和肝素亲和柱(Heparinsepharose)对复性蛋白进行纯化,比较纯化效率的差异。结果最佳复性条件为pH8.5,尿素浓度为1.5molL,精氨酸浓度大于0.3molL,GSH∶GSSG=4∶1;复性温度及包涵体蛋白终浓度越高,复性效率越低。IMAC和Heparinsepharose亲和柱均可用来纯化复性蛋白溶液,但Heparinsepharose纯化效率较高。结论确定了重组人ECSOD包涵体体外稀释复性的最佳条件及复性后蛋白纯化的方法。     

青海血蜱重组rHq002蛋白包涵体的纯化

目的 对青海血蜱重组rHq002蛋白包涵体进行复性及纯化.方法 将重组质粒pET-30a-Hq002转化E.coli Rosetta(DE3),IPTG诱导表达重组Hq002蛋白;超声破碎菌体,收集细胞碎片,用PBS缓冲液和低浓度尿素进行多次洗涤;洗涤后的包涵体用6 mol/L盐酸胍溶解,稀释法进行蛋白复性;用镍离子亲...     

Synthesis of HfB2 powders by mechanically activated borothermal reduction of HfCl4

HfB₂ powders were synthesized via a borothermal reduction route from mechanically activated HfCl₄ and B powder blends. Mechanical activation of the powder blends was carried out for 1 h in a high-energy ball mill using hardened steel vial and balls. Mechanically activated powders were subsequently annealed at 1100 °C for 1 h under Ar atmosphere. Then, purification processes such as washing with distilled water and leaching in HCl solution were applied for the elimination of the undesired boron oxide (B₂O₃) phase and the probable Fe impurity. The effect of boron amount on the microstructure of the resultant powders was investigated. The boron amount in the starting blends plays an important role in the formation of the HfO₂ phase. HfB₂ powders without any detectable HfO₂ were prepared by adding 20 wt% excess amount of boron. Microstructural analyses of the mechanically activated, annealed and purified powders were performed using X-ray diffractometer (XRD), particle size analyzer (PSA), stereomicroscope (SM), scanning electron microscope/energy dispersive spectrometer (SEM/EDS) and transmission electron microscope (TEM).     

Superhigh selective capture of volatile organic compounds exploiting cigarette butts-derived engineering carbonaceous adsorbent

Herein, we develop cost-efficient superhigh-performance of engineering carbonaceous adsorbent from cigarette butts using combined wet-impregnated and re-dispersed method of KOH, which optimizes the implant approach of activator, breaking the restriction of selective capture of toluene using traditional activated carbon. The Brunauer-Emmett-Teller (BET) surface area and pore volume of targeted adsorbent can attain 3088 m²·g^-1 and 1.61 cm³·g^-1, respectively, by optimizing the temperature-dependent synthetic factor effect of the adsorbent. The adsorption capacity of resultant adsorbent for presenting volatile benzene and toluene shows a positive correlation with increasing carbonization temperature of carbon precursor. Besides, we demonstrated the unsmoked and smoked butts derived adsorbents afford feeble difference in saturated adsorbed capacity of volatile organic compounds (VOCs). The highest adsorption capacity of sample CF-800 for benzene and toluene in CF group is as high as 1268.1 and 1181.6 mg·g^-1 respectively, slightly higher than that of sample UF-800, but far outperforming reported other adsorbents. The predicted adsorption selectivity of CF-800 and UF-800 for C₇H₈/H₂O (g) using the DIH (difference of isosteric heats) equation reach up to ca. 3800 and 7500 respectively, indicating the weak adsorbability of water vapor on the developed adsorbent and greater superiority of the smoked butts derived adsorbents in selective capture of VOCs at low relative humidity in the competitive adsorption process for practical mixed VOCs.     

净化煤焦油沥青的中间相热转化研究

本文用煤岩学方法研究离心法净化煤焦油沥青中间相的热转化过程,考察与评价了离心处理条件、原生与次生喹啉不溶物组成等对中间相热转化的影响。     

Preliminary separation and purification of rutin and quercetin from Euonymus alatus (Thunb.) Siebold extracts by macroporous resins

In this study, the performances of rutin and quercetin from Euonymus alatus (Thunb.) Siebold extracts on five macroporous resins with different physical and chemical properties were investigated. The results of static tests indicated that AB-8 resin was the most appropriate and its adsorption data were well fitted to the Langmuir and Freundlich isotherms. In order to optimize the separation process, different pH values of sample solution, different concentrations and pH values of ethanol solution also have been investigated. Column packed with AB-8 resin was used to perform dynamic adsorption and desorption experiments. After the treatment with AB-8 resin and optimal conditions, the contents of rutin and quercetin in the product were 8.45-fold and 13.14-fold increased with recovery yields of 63.1% and 72.3%, respectively. The results showed that the present method was suitable for large-scale preparation of rutin and quercetin from Euonymus alatus (Thunb.) Siebold or other herbal materials.     

室内化学污染与净化方法的探讨

分析了产生室内化学污染的原因。结合城市住宅和办公室的实际情况，指出了控制室内污染源是减轻室内化学污染的根本措施，进行室内自然通风和净化器净化的方法是减轻室内化学污染的有效措施。提出了活性炭吸附剂的改进建议。     

单宁的提取纯化技术研究进展

对单宁提取纯化技术的最新研究成果进行了综述,着重介绍了超声波提取、微波提取、超临界流体萃取和树脂纯化等技术在提取纯化单宁中的应用,对各种方法的优缺点进行了分析,对单宁的研究现状做出总结并给予展望,旨在为单宁的开发利用提供依据。