Heat transfer of gas flow through a packed bed

This paper reports an experimental study of both the transient and steady-state heat transfer behaviour of a gas flowing through a packed bed under the constant wall temperature conditions. Effective thermal conductivities and convective heat transfer coefficient are derived based on the steady-state measurements and the two-dimensional axial dispersion plug flow (2DADPF) model. The results reveal a large temperature drop at the wall region and the temperature drop depends on the axial distance from the inlet. The 2DADPF model predicts the axial temperature distribution fairly well, but the prediction is poor for the radial temperature distribution. Length-dependent behaviour of the effective heat transfer parameters and non-uniform flow behaviour are proposed to be responsible. A comparison with previously published correlations and data in the literature shows that the relationships proposed by Bunnell et al. and Demirel et al. agree well with the measured effective radial thermal conductivity, whereas the wall-fluid heat transfer coefficient is better represented by the Li-Finlayson correlation.     

气体压强对非晶InGaAs薄膜光学常数的影响

论述一种用透射谱包络线法计算非晶薄膜的折射率、消光系数和光学带隙的方法。通过正交实验确定除压强之外的工艺参数,研究压强的改变对薄膜主要光学常数的影响,运用最小二乘法、内插值法在matlab编程基础上,拟合出光学常数曲线,借由观察曲线的特点,分析在低工作气压下,气压的改变对光学常数的影响。     

蜂窝式构件长细比的计算方法

为了进一步研究蜂窝构件稳定承载性能,以现有长细比计算理论为基础,结合蜂窝构件的受力机理和界面特性,提出了蜂窝构件长细比计算中相关参数的计算方法．同时,结合理论推导和数值分析结果,提出了蜂窝构件换算长细比建议计算公式．     

一种公交网络最优路径新算法*

从出行者的实际情况出发,提出步行愿望系数,综合考虑最小换乘次数、最短时间以及最小费用等因素,提出了一种公交网络最优路径新算法,应用于广州市大学城内公交线路查询,实现相应的仿真系统。     

上海东方体育中心综合体育馆屋盖结构风振分析

在屋盖同步风洞试验测量的基础上,采用CQC法对上海东方体育中心综合体育馆大跨屋盖进行了较为准确的空间风振分析。分析了多个复杂空间振型对有代表性节点的动位移根方差的影响,得到本体育馆的最大参振振型为30阶;考虑了两种荷载组合工况,比较了工况1、工况2和自重作用下屋盖结构的节点位移和基底反力,工况1作用下的节点位移和基底反力最大,工况2作用下的相应结果最小;最后给出了5个不利风向下的位移风振系数,可供参考。     

Deformation and failure study of surrounding rocks of dynamic pressure roadways in deep mines

In order to understand the change rules of stress-displacement in surrounding rocks of dynamic pressure roadways in deep mines and to obtain a theoretical basis for analyses of roadway stability and designs of support,we established a coupling equation of adjacent rock strength,mining stress and supporting resistance on the basis of an elastic-plastic theory of mechanics.We obtained an analytical solution for stress and displacement distribution of elastic and plastic regions in surrounding rock of dynamic pressure roadway..Based on this theory,we have analyzed the changes in stress-displacement in elastic and plastic regions of surrounding rocks of dynamic pressure roadways in the Haizi Coal Mine.The results show that:1) radial and tangential stress change violently within the first 4 m from the inner surface of a roadway after excavation;radial stress increases while tangential stress decreases within a range of about 6 m from the inner surface of the roadway as a function of q3;2) radial and tangential stress increase with an increase in the mining pressure coefficient k;the increase in the rate of tangential stress is greater than that of radial stress;3) the radial displacement of the inner surface of roadways decreases with an increase in q3,provided that k remains unchanged.     

辽宁地区农村住宅的节能研究

针对我国辽宁地区现有农宅普遍存在的采暖能耗高而居住热环境差的问题,通过对农村住宅的体型系数、平面节能设计、围护结构等方面进行充分分析,提出适合辽宁农村住宅的保温节能措施,从而增强农宅保温隔热能力,提高室内热舒适度。力求使辽宁农村住宅在经济、技术和节能方面均达到新农村建设的要求。     

基于图像噪声分析的计算机生成图像检测算法

计算机生成图像与自然图像在物理生成机理上的差异性导致其在噪声分布上具有明显的区别,据此提出一种基于图像噪声分析的计算机生成图像检测新方法。首先,用小波隐马尔可夫(MMT)模型对图像噪声进行预处理;接着,基于最大似然估计方法估测图像参考模式噪声;最后,在提取图像模式噪声统计距及其与参考模式噪声相关差值基础上,利用支持向量机(SVM)分类器进行鉴别。实验结果显示,较已有的典型算法,该算法具有更好的检测率。     

Electrical resistance behavior of vinylester composites filled with glass-carbon hybrid fibers

Vinylester (bismethacryloxy derivative of a bisphenol-A type EP resin, VE) composites with glass-carbon hybrid fibers (CF-GF) weight fraction of 50%, were prepared by the compress molding method. The distribution of carbon fiber in the hybrids was observed by stereomicroscope. The electrical resistance behavior of the composites filled with different carbon fiber (CF) weight contents (0.5% to 20%) was studied. The experimental results show that the electrical resistance behaviors of CF-GF/VE composites are different with those of CF/VE composites because carbon fibers’ conducting networks are broken by the glass fibers in the CF-GF/VE composites. The carbon fibers distribute uniformly in the networks of glass fibers (GF) like single silk and form the semi-continuous conducting networks. Composite filled with GF-CF hybrid has a higher percolation threshold than that filled with pure CF. At that time, the resistivity of CF-GF/VE composites varies little with the temperature increasing. The temperature coefficient of resistivity in GF-CF/VE composite is less than 317 ppm and the variation of the resistivity after ten thermal cycles from 20 °C to 240 °C is less than 1.96%. Funded by the Natural Science Foundation of Hubei Province (No. 2007ABA028)     

Similarity identification method on formational interfaces and application in general granite

An instrumented drilling system can be applied for the acquisition of drilling process parameters.The system can provide continuous and huge data for geotechnical engineering.However, due to the complexity of ground strata, the variation in the drilling parameters with stratigraphical characteristics is great and the correlation between likely comparable parameters is not high, which limits the use of conventional correlation approaches in this field.How to use the data for engineering and how to get a reasonable interpretation for the relationships among the drilling parameters, as well as between a drilling parameter and formational character-istics, become a technical choke point for the development and application of the instrumented drilling system.Based on similarity criteria, the extraction of sample data and characteristics, the pretreatment of data and feature matching algorithms have been ana-lyzed and an approach of slope coefficient searching identification has been established.A case study was carried out for the similar-ity between the rotational speed of the drill bit, flushing pressure, and effective thrust force graphics in general weathered granite.The result shows that the similarity coefficients between the rotational speed of the drill bit, flushing pressure, and effective thrust force are 0.72 and 0.83, respectively.Although there are differences between the distances of the graphics, the curves of both rota- tional speed and flushing pressure agree with the effective thrust curve in shape, which provides a possible method for the identifica- tion of various formations by use of the similarity between feature drilling parameters.