企业信息化建设中的问题及对策

我国企业在信息化建设过程中取得了一些成果 ,也出现了不少问题 ,本文主要针对这种现状 ,指出了企业存在的一些问题 ,并就信息系统开发、维护和集成 ,提出了一些建议。     

单麦克风和双麦克风语音增强系统的研究

本文对采用减谱法和箱关法的语音增强系统进行了研究，系统的噪声为白噪声和普通机房噪声。减谱法采用单麦克风输入，试验中发现语音的分帧方法对消噪影响很大，通过比较得到了一种具有明显消噪效果的分帧方法，在相关法中采用双麦克风输入，对两个输入信号之间的时延差进行了补偿，在求维纳滤波器系数时，对信号谱进行统计平均，从而使消噪后的语音信号具有较好的自然度。在研究以上两种方法的基础上，我们提出了一种混合消噪系统，     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

Automatic generation of IDEF0 models

This paper looks into a new area for knowledge-based system application, that of manufacturing modelling. Manual generation of IDEF0 models of manufacturing systems is time-consuming and inconsistent. However, the process can be automated to improve timeliness and consistency. In this paper, a knowledge-based manufacturing modelling system for the automatic generation of IDEF0 models is proposed. The system will not only greatly reduce the IDEF0 modelling time but will also eliminate the inconsistency problem of conventional IDEF0 modelling systems. The paper explains the knowledge-based approach and identifies the kinds of domain knowledge that are required for the construction of the knowledge-based manufacturing modelling system.     

Best L1 Piecewise Monotonic Data Modelling

Let us consider n data measurements of a univariate process that have been altered by random errors. We assume that an underlying model function has a substantially smaller number of turning points than the observed ones. We propose algorithms that make least the sum of the moduli of the errors by requiring k monotonic sections, alternately increasing and decreasing, in the sequence of the smoothed values. The main difficulty in this calculation is that the optimal positions of the joins of the monotonic sections have to be found automatically among so many combinations that it is impossible to test each one separately. Moreover, the calculation seems to be very intractable to general optimization techniques because O(n^k) local minima can occur. It is shown that dynamic programming can be used for separating the data into optimal disjoint sections of adjacent data, where each section requires a single L₁ monotonic calculation. This procedure is highly efficient, requiring at most O(kn²) computer operations and O(n) best L₁ monotonic calculations to subranges of data for a global minimum.     

Issues in nonlinear stochastic grey box identification

Grey box identification refers to the practice of identifying dynamical systems in model structures exploiting partial prior information. This contribution reviews a method for stochastic grey box identification and surveys experiences and lessons of applying it to a number of industrial processes. Issues to be addressed include advantages and costs of introducing stochastics into the model, the question of what contribution must be expected from the model designer as opposed to what can be formalized in computer algorithms, and an outlook on future plans to resolve present shortcomings.     

测井声波波形与声源的特性有关

根据推导出的圆管状压电换能器在各种激励电压信号作用下的声源函数和谱函数以及声波测井正演问题研究出的石油井孔中任意一点上的声波公式,用计算机技术模拟出了相应的测井记录声波全波列,并将它们输入到声波全波列测井处理程序中进行处理。正演模拟结果和处理结果表明,测井记录的声波全波列不但与所测地层的性质有关,而且与声源的特性有关,声源特性对测井记录的声波全波列的质量有一定的影响。     

基于IGBT的PWM大功率直流伺服驱动

本文介绍ＩＧＢＴ、ＥＸＢ８４１和ＬＥＭ模块在大功率ＰＷＭ直流伺服驱动系统中的应用和系统抗干扰设计。使用效果表明，基于ＩＧＢＴ的设计，可提高大功率直流伺服系统的可靠性和性能、减小体积、降低成本。     

Kinetic model for water/oil absorption of mesquite gum (Prosopis juliflora) and gum arabic (Acacia senegal)

The water and oil uptake of mesquite and arabic gums in powdered form was studied at temperatures of 23, 35 and 45°C. A previously proposed equation to predict osmotic equilibrium was tested using the experimental data with both gums and a good statistical fit was obtained. Mesquite gum showed the highest water and oil absorption at all temperatures studied. Temperature dependence of the reciprocal of the S₁ and WL_∞ were determined using an Arrhenius equation. The activation energy for water and oil absorption for gum arabic was 21.98 and 39.57 kJ mol⁻¹, compared to that of mesquite gum having values of 15.79 and 46.16 kJ mol⁻¹, respectively. A second order kinetic model was obtained for water and oil absorption for both gums.     

银行计算机系统维护的探讨

从机房建设、通讯线路、日常维护、诊断维修等几个方面探讨了银行计算机系统维护中的重点和难点