非线性编辑中特效图文素材的应用

Cool 3D是一款特效图文制作软件，适用于动画片段、3D文字、图形等制作场合。Cool 3D中制作的特效素材应用于非线性编辑中，可以丰富素材的表现形式，提高节目编辑制作的整体质量。     

低价硫化铝法从氧化铝直接炭还原制铝的动力学研究

低价硫化铝法从氧化铝直接炭还原制铝的动力学过程极为复杂,过程的前期受界面化学反应控制,过程后期受扩散过程控制,并求得不同时期的活化能,反应前期:E1=63.81 kJ/mol(6.67 Pa)、E2=50.82 kJ/mol(66.7 Pa)、E3=54.72 kJ/mol(666.7 Pa)、E4=39.61 kJ/mol(1333 Pa);反应后期:E*1=112.90 kJ/mol(6.67 Pa)、E*2=89.92 kJ/mol(66.7 Pa)、E*3=97.32 kJ/mol(666.7 Pa)、E*4=51.83 kJ/mol(1333 Pa).从动力学的角度提出了反应的较佳条件.温度、真空度的提高一方面可增大反应速率,但另一方面却加大了硫化铝的挥发,仅从增大速率而言,温度应大于1100 ℃,真空度应优于1333 Pa为宜.     

Comparison of six methylation methods for analysis of the fatty acid composition of albacore lipid

Six methods widely used to produce methyl esters for the gas chromatographic determination of the fatty acid composition of a marine lipid were compared. Four acid-catalyzed methods (1% H₂SO₄: CH₃OH; 5% HCl: CH₃OH; 7% and 14% BF₃: CH₃OH) and two base-catalyzed methods [0.5M NaOCH₃: CH₃OH; (1:4) tetramethylguanidine: CH₃OH] were used.
The use of BF₃: CH₃OH (7% and 14%) gave a lower content of 18:1 n9 than the other methods and produced an artefact (2.7–3.2% of total fatty acid content) eluting between the 20:5 and 24:1 fatty acid methyl esters. No significant differences were obtained between the other four methods.
Accordingly the use of BF₃: CH₃OH for transmethylation of marine lipids is not recommended. Results obtained in the other four methods showed that all are comparable.     

Thermally stimulated discharge current studies in pure and fe-doped polystyrene films

Studies were made on the thermally stimulated discharge currents (TSDCs) in pure (undoped) and Fe-doped polystyrene films as a function of polarizing field, polarizing temperature and dopant concentration. While undoped films exhibited a single peak, doped films showed two peaks one at low temperatures and another at high temperatures. The low temperature peak, which exhibits a shift towards lower temperatures with increasing dopant concentration, is attributed to the relaxation of the main chain, while the high temperature peak, which shows a tendency to shift towards higher temperatures with dopant concentration, is due to space charge polarization. The TSDCs were higher for low dopant concentrations than their undoped counterparts, while for high concentrations of the dopant, the TSDCs decreased. Formation of charge transfer complexes at low dopant concentrations and molecular aggregates at higher dopant concentrations are suggested as the possible reasons for this behaviour.     

Purification and renaturation of recombinant human lymphotoxin (tumour necrosis factor beta) expressed in Escherichia coli as inclusion bodies

High level expression of recombinant human tumour necrosis factor β (rh TNF-β) in Escherichia coli results in the formation of two portions of protein, namely soluble active protein and insoluble protein which is inactive and aggregates in the form of inclusion bodies (IBs). In this study, a procedure for purification and renaturation of rh TNF-β from inclusion bodies has been designed and verified experimentally with a product purity of more than 90% and a recovery of about 30%. The procedure includes washing of IBs with specific wash buffer (Triton X-100/EDTA/lysozyme/PMSF), their solubilization with 8 mol dm^?3 alkaline urea, purification with ion-exchange columns, refolding with renaturation buffer and finally concentration and desalination with an ultrafiltration membrane. The characteristics of the renatured protein were identical with those of purified protein from the soluble fraction as demonstrated by (1) SDS-PAGE, (2) cytotoxic activity on mouse L929 cells, (3) N-terminal amino acid sequence, and (4) gel filtration chromatography.     

The fracture stress of chemical vapour deposited diamond

The factors which control the fracture stress of chemical vapour deposited diamond have been studied using the 3-point bend geometry. Fracture stress values of 300–800 MPa for the growth side and 600–1200 MPa for the nucleation side were recorded for samples of thickness 0.4–2.4 mm. A Weibull modulus of 23 was calculated for the growth surface data, showing that the fracture stress variability was low for a brittle material. A theory based on these results demonstrates that the material behaviour is remarkably simple, depending only on the grain size and the sample thickness, regardless of wide variations in other parameters such as optical transmission and stress state. The paper also contains a possible explanation for this well-defined behaviour based on microstress variations resulting from differences in defect density in different growth sectors within a grain.     

显式BEZIER三角曲面的构造及其在离散数据插值中的应用

本文较系统地讨论了显式Bezier三角曲面的Clough-Tocher分割构造方法，并从工程应用角度提出了一种准C‘连续的Bezier三角曲面。由这种准C‘连续的Bezier三角曲面，通过进一步求解整体C‘连续的Bezier三角曲面在解决3D离散数据的曲面插值中取得了较好的应用效果。     

A3钢的工业大气腐蚀

在辽宁省工业城市进行 A3钢大气暴露试验。两年后测出不同地点腐蚀率。依据所记录的各试验点的气象数据和污染数据,讨论了 A3钢的大气腐蚀规律。     

On connections between 3-d microstructures and their 2-d images

The problem of recovery of three-dimensional microstructural parameters from two-dimensional images is addressed in its inverse form. Three-dimensional inhomogeneous solids with known microstructures are generated virtually and images of their cross-sections are analyzed. Three different types of randomly oriented microcracks and microcracks having preferential orientation with some scatter. Somewhat unexpected result is that, in all the cases considered, three-dimensional defect densities are very close to average values of corresponding two-dimensional parameters.     

Superconductivity at differentTc in CdBa2Ca2Cu3Oy

A Cd analogue of the Tl and Hgn =3 series with nominal composition CdBa₂Ca₂Cu₃O_y has been synthesized. The samples were superconducting according to magnetic susceptibility measurements. The critical temperature was 103 or 107 K depending on the preparation conditions. The EDX analysis revealed the presence of Cd-1111, Cd-1121, and Cd-2333 as minor phases. The observed diamagnetic effects were attributed to the differentT _c of these phases.