汽车排放控制系统中的氧传感器现状及展望

介绍了浓差型(Nernst型)、极限电流型和半导体电阻型等汽车排放控制系统中的氧传感器原理及结构。在综合该领域国内外研究现状的基础上,对氧传感器的发展进行了展望。     

14 kV single-phase superconducting fault current limiter based on YBCO films

We present the fabrication and short circuit test results of a 14 kV single-phase resistive superconducting fault current limiter (SFCL) based on YBa₂Cu₃O₇ (YBCO) films. Individual components were processed using the 4″ YBCO films and have the rated voltage and current of 600 V and 35 A at 77 K, respectively. Twenty four components, eight components in series and three lines in parallel, make a module having the rated voltage and current of 4.8 kV and 105 A, respectively. Three modules were assembled in series to produce the SFCL working at 77 K, a 14 kV single-phase machine for the 22.9 kV Y-Y grid. short circuit tests were successfully conducted in an accredited test facility with the maximum fault currents up to 14.1 kA_P. All components quenched together upon faults and shared the rated voltage evenly without any supplementary device between the modules. This proves that the SFCL based on YBCO films may not only work reliably at 22.9 kV, but also provide technical feasibility for higher voltage application including the transmission grids.     

企业材料耗用的统计分析与评价

本文利用回归分析导出材料耗用的回归方程 ,并对方程进行拟合优度检测和显著性检验 ,以及对材料耗用情况进行综合评价。     

F2.4微孔膜的制备及在膜蒸馏过程中应用的初步研究

采用相转化法制备了F2 4的疏水微孔膜 ,并对F2 4和PVDF微孔膜的机械性能以及疏水性等方面进行了对比 .结果表明 ,F2 4微孔膜在拉伸时的应变以及断裂伸长率约为PVDF微孔膜的 6～ 9倍 ;其接触角 (77 4°)也大于PVDF膜的接触角 (6 6 7°) .尽管膜蒸馏的数据显示F2 4微孔膜的蒸馏通量尚不及PVDF膜 ,但通过调节各项制膜参数 ,F2 4可能具有良好的应用前景     

4F0.06AC树脂吹塑薄膜技术的探讨

在加工应用试验的基础上。探讨了加工温度、吹胀比、超想线高度及设备对４Ｆ０．０６ＡＣ薄膜适宜的加工条件。     

汽车组合仪表板控制系统设计

介绍了以PIC16F873单片机为控制核心的汽车组合仪表板控制系统的设计,简述了汽车组合仪表板的基本构成,介绍了汽车组合仪表板控制系统的组成和各部分功能,给出了数据采集处理电路、电源电路等部分硬件电路设计方案,并阐述了一些软件设计算法,如分段插补法和用于平滑指针的软件设计算法等。     

创新铁路运输方式实现750m^3高炉富余铁水分流

针对750m^3高炉铁水生产富余状况，制订了富余铁水向铸铁机铸铁的调送方案，通过创新思维、系统挖潜、优化资源配置等措施的实施，保证了750m^3高炉的正常生产，取得了良好效果。     

Expressing the equivalence of non‐isothermal and isothermal heat sterilization processes

Currently, the sterility of heat‐processed food and pharmaceuticals is assessed in terms of an F₀ value, based on the equivalence of the heat treatment to an isothermal process at a reference temperature. This F₀ value, however, has a meaning if, and only if, the inactivation kinetics of the targeted spores (or cells) follow a first‐order relationship and the temperature dependence of the D value, the reciprocal of the rate constant, is log‐linear. There is growing evidence that these conditions are not satisfied by many spores, including those of Clostridium botulinum and vegetative cells. Consequently, a replacement for the F₀ value is proposed in the form of a momentary equivalent time at the reference temperature based on the actual survival pattern of the spores, which need not be log‐linear. This equivalent time can be calculated together with the theoretical survival ratio in real time, thus enabling an operator to monitor the lethality of ongoing industrial heat processes. The concept is demonstrated with published survival data of C. botulinum, for which the Weibullian and log‐logistic models served as primary and secondary models, respectively. The safety factor according to the proposed method is in the number of added minutes of processing, beyond the theoretical time needed to reduce the survival ratio of the targeted spores or cells to a level that would produce practical (or commercial) sterility. Copyright © 2006 Society of Chemical Industry     

Trade and spatial economic interdependence

Abstract. Regional scientists have had a long fascination with spatial economic interdependence, initially stimulated by the development of a suite of models in Isard (1960). In recent years there have been two major developments; first, a movement towards greater integration in model development not only with large-scale models, but also with careful attempts to make more components of the system endogenous. The second development has been the pursuit of greater integration than in earlier studies between theory and applied regional economic modelling, most notably in the area of trade and economic development. We explore some of the recent developments of this latter approach and provide an assessment of the current state-of-the art of some future opportunities.     

TFT有源矩阵α－Si∶H薄膜PECVD淀积工艺研究

分析了α－Ｓｉ∶Ｈ薄膜的质量和厚度对α－Ｓｉ∶ＨＴＦＴ关键性指标的影响，深入、详细地讨论了其ＰＥＣＶＤ淀积工艺，并在实验的基础上确定了最佳淀积工艺参数，从而获得了高性能的７５ｍｍ３７２×２７６像素α－Ｓｉ∶ＨＴＦＴ有源矩阵