一种宽带增益均衡器的设计与仿真

利用薄膜电阻加载的枝节谐振器设计了一种微小尺寸的微带均衡器子结构电路。利用CST仿真软件设计模拟了基于该结构的宽带增益均衡器,并给出了仿真结果。     

波导端头裂缝的矩量法分析

利用矩量法对矩形波导端头裂缝的散射特性进行了理论计算,讨论了缝的谐振频率与缝长,缝宽,壁厚等的关系,并给出了测试结果,计算磁流分布表明,基模占主导地位,三次模的幅度为主模幅度的５％以下,缝隙口面的场分布为对称分布。     

TaN微波功率薄膜匹配负载的设计及制备

基于有耗传输线理论设计了频率为DC-3GHz的TaN微波功率薄膜匹配负载,采用HFSS软件仿真了匹配负载的频率特性。根据设计仿真结果,采用反应磁控溅射和掩模图形化方法制备了TaN微波功率薄膜匹配负载样品,基片为6 mm×9 mm×1 mm的BeO陶瓷基片,TaN薄膜的直流电阻为50。结果表明,实验结果与仿真结果基本一致,在DC-3 GHz频率范围内,样品的电压驻波比(VSWR)都小于1.2。     

改进型串联谐振回路在宽带功率合成中的应用

本文介绍了一种改进型的串联谐振回路在宽带功率合成中的应用.这种回路是在RLC串联谐振回路上并联一电阻构成的.将此谐振回路串联到功率合成级管子的输出端,相比于LC、RLC串联谐振回路,它能更有效地改善全频段的阻抗匹配,使增益平坦度和输出驻波比同时得到了改善.增益平坦度从±1.4 dB降到了±0.75 dB,输出驻波比从6:1降到了2:1以下.     

Performance characterization of a microwave transistor subject to the noise and matching requirements

In this paper, the gain G_T of a microwave transistor is expressed analytically in terms of the mismatchings (V_in ≥ 1, V_out ≥ 1) at the ports, noise figure F ≥ F_min and the [z]‐parameter and noise parameters. Firstly, because the input termination Z_S determines the noise F ≥ F_min, thus the input termination Z_S is pre‐determined to lie on the tangent constant noise and available gain circles so that the maximum power delivery is ensured for the given noise. Then, a design configuration is constructed in the input impedance Z_in‐ plane covering the gain and the required input and output mismatch circles within the Unconditionally Stable Working Area for the predetermined input termination Z_S. Finally, the compatible (F ≥ F_min, G_T, V_in ≥ 1, V_out ≥ 1) quadrates for either required or optimum (V_in ≥ 1, V_out ≥ 1) couples are obtained with their (Z_S, Z_L) couples from the analysis of the design configuration. Furthermore, a case study is also presented for the full flexible performance characterization of a selected microwave transistor. It can be concluded that the near future microwave transistor is expected to be identified by performance data base built by its compatible (F ≥ F_min, G_T, V_in ≥ 1, V_out ≥ 1) quadrates and the (Z_S, Z_L) terminations within the device operation domain to overview all the possible low‐noise amplifier designs using the full device capacity. Copyright © 2015 John Wiley & Sons, Ltd.     

On the measurement of microwave absorption of bulk YBaCuO superconductors in X-band (8–12 GHz)

Microwave absorption at the surface of highT _c YBaCUO superconducting sample has been determined in X-band by measuring VSWR. Power reflectivity >98% has been observed in the frequency range of 8·2–10·5 GHz indicating very low absorption at the surface. At some of the frequencies, however, negligible microwave loss has been observed.     

一种新型溅散板馈源天线

为了改善溅散板馈源天线中开口辐射波导的终端匹配性能并得到对称方向图,提出了一种Ku波段介质锥加载喇叭式溅散板馈源天线结构。该结构将聚四氟乙烯材料(介电常数为2.56)的介质体悬空插入圆锥喇叭内部,使介质体与空气更好地匹配。CST数值仿真结果表明,在工作频段内馈源VSWR达到1.11以下,方向图具有良好的对称性;同时,介质锥加载副反射面构成的一种新型的溅散板馈源作为代替传统卡塞格伦天线中的馈源和副反射面,省去了支撑副反射面的支杆,减小了遮挡,提高了天线效率,达到了60%以上,为工程设计提供很好的理论依据。     

S波段PIFA天线的设计

设计了TD—SCDMA终端的PIFA天线,定出了天线的结构尺寸,并进行了开槽改进。该天线结构紧凑,可以很方便地用于3G无线通信的终端设备,实用性很强。利用HFSS软件进行了天线建模,性能仿真和优化,最终得到增益为G=4．3303dB,效率达到45．471％,电压驻波比小于2的带宽大于100M的天线。     

A band‐suppression UWB suspended planar antenna incorporating a slotted spiral resonator

A novel miniaturized planar inverted F‐L antenna assembly is considered for UWB radio operations. The antenna design utilizes the electromagnetic coupling between an air dielectric planar inverted‐F antenna (PIFA) and a parasitic planar inverted‐L (PIL) element, with broadband feeding from a rectangular plate. To improve the functionality of the channel, a simple notch filter has been introduced through a local modification to the broadband feed plate, this takes the form of a simple slotted rectangular spiral resonator which is etched directly onto the plate. This allows the proposed antenna to maintain its full band UWB coverage, with the HYPERLAN/2 band centered at 5.35 GHz to be effectively rejected over the sub‐band 5.15–5.725 GHz, without the need for substantial re‐optimization of its principal structure parameters. The impedance bandwidth operates over the full UWB band, with VSWR better than 2, this performance is not degraded by the presence of the band rejection. The observed gains, radiation patterns, and group delay confirm that the antenna has appropriate characteristics for short range wireless applications. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

基于汽车遥控门禁(RKE)系统性能及可靠性测试的研究

随着汽车越来越向智能化和人性化发展,汽车RKE无线接入技术的发展也日益成熟,并呈现出在新车市场和售后配件市场越来越普及的趋势,这一趋势所带来的规模经济效应将会使得RKE系统更具吸引力,而且会在汽车用户中越来越受欢迎.为扩大此系统在汽车市场的运用,本研究从汽车RKE系统设计原理介绍入手,对该系统性能各个项目的测试进行了研究,其中包括发射频率、发射功率、接收灵敏度、接收带宽范围、接收谐振频率、接收驻波比、遥控距离以及可靠性测试等主要性能指标,以期为广大汽车用户提供性能可靠的汽车遥控门禁系统.