Nonlinear Thermal Analysis for Qing-Tibet Railway Embankments in Cold Regions

Heat convection in ballast mass in railway embankments is a problem of heat convection in porous media. In order to calculate the temperature distribution of the Qing-Tibet railway embankment from the governing equations used to study forced convection for incompressible fluids porous media, detailed finite-element formulas for heat convection in porous media are derived using Galerkin’s method. The temperature distributions on central lines of the traditional railway embankment, the ripped-rock embankment, and the ripped-rock revetment embankment that were constructed on July 15, 2002 have been analyzed and compared on July 15, October 15 in the 24th year after construction, and January 15 in the 25th year after construction under the climatic and geological conditions on the Qing-Tibet Railway. The calculated results indicate that the traditional railway embankment will raise the permafrost temperature under the embankment base and make the permafrost embankment thermally unstable. The ripped-rock embankment and the ripped-rock revetment embankment will reduce the permafrost temperature under the embankment base in cold regions, therefore maintaining the thermal stability of permafrost. However, the ripped-rock embankment needs more rock mass while the ripped-rock revetment embankment need less rock mass, and its construction cost is lower than that of the former. Therefore, it is highly recommended that the ripped-rock revetment embankment be used for the Qing-Tibet railway embankment structure in high temperature permafrost regions so that the permafrost embankment can be protected as much as possible.     

Determination of the total concentration and speciation of Al(III) in tea infusions

The aluminium species in different tea infusions were investigated, by determining their stability constants and concentration. This was done for some particular samples using a simple experimental method based on the sorption of aluminium on the strongly sorbing resin Chelex 100, by a batch procedure. From the thermodynamic information obtained it is possible to calculate the concentration of the different species, and in particular that of the free metal ion, which is very important for evaluating the adsorption of aluminium on biological membranes. It was found that aluminium in the tea infusions here considered is present at high total concentration, approximately 0.1 mM, but mainly linked to strong complexes, for instance with side reaction coefficient higher than 10(5.11) at pH 3.95 in one case (tea 1). This could be the reason for the low toxicity of aluminium in tea. These strong complexes were not dissociated even in the presence of Chelex 100. In this case only a limiting value of the reaction coefficient could be evaluated. The presence of the very strong complexes was found in all the tea sample here considered. In two of the considered samples (one black and one green tea) a part of Al(III) was linked to less strong complexes, for example with a reaction coefficient 10(4.14) (tea 2, pH 4.20). The presence in the considered tea infusions of other substances able to complex aluminium was also detected, by the well known ligand titration procedure, at concentration ranging from 0.65 to 3.37 mM in three tea infusions, and at somewhat higher concentration in the case of the ready drink, which was also considered for comparison.     

Some better practices for measuring racial and ethnic identity constructs.

Racial and ethnic identity (REI) measures are in danger of becoming conceptually meaningless because of evaluators' insistence that they conform to measurement models intended to assess unidimensional constructs, rather than the multidimensional constructs necessary to capture the complexity of internalized racial or cultural socialization. Some aspects of the intersection of REI theoretical constructs with research design and psychometric practices are discussed, and recommendations for more informed use of each are provided. A table that summarizes some psychometric techniques for analyzing multidimensional measures is provided. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

连续箱梁桥中跨合龙段劲性骨架优化设计

结合某连续箱梁桥悬臂施工实践,对中跨合龙段劲性骨架设置和受力进行了分析,推导了劲性骨架设计的理论计算公式,并分析了劲性骨架刚度大小对桥梁整体结构的影响。     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

建设领域劳务分包现状分析及对策

从劳务市场的现状入手,分析劳务合同存在的问题,寻找解决办法,有利于对建筑市场进行行政指导、行政监督和建筑业企业的健康发展。     

Development of adolescent reading comprehension in language 1 and language 2: A longitudinal analysis of constituent components.

This study investigated the relationship between reading comprehension development of 389 adolescents in their dominant language (Language 1 [L1], Dutch) and a foreign language (Language 2 [L2], English). In each consecutive year from Grades 8 through 10, a number of measurements were taken. Students' reading comprehension, their linguistic knowledge (vocabulary and grammar knowledge) and processing efficiency (speed of word recognition and sentence comprehension) in both languages, and their metacognitive knowledge about reading were assessed. The relative strengths of the effects of these components of reading were analyzed to distinguish among 3 hypotheses about the relationship between L1 and L2 reading comprehension: the transfer hypothesis, the threshold hypothesis, and the processing efficiency hypothesis. The transfer hypothesis predicts a strong relationship between L1 and L2 reading comprehension and a strong effect of metacognitive knowledge on L2 reading comprehension, whereas the threshold and processing efficiency hypotheses predict a more important role of language-specific knowledge and processing skills. Results support the transfer hypothesis, although language-specific knowledge and fluency also contribute to L2 reading performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

混流式水轮机整体结构有限元分析

由于混流式水轮机整体结构的复杂性,因没有成熟的理论指导,在设计阶段对动力特性难加以考虑.通过有限元建立其动力学控制方程,以大型有限元软件为平台建立有限元计算模型,并使用先进的Lanczos法对结构整体与局部模态分析确定结构的固有频率和振型等动力特性.同时与其他振源频率进行了比较分析,研究其出现共振的可能性.     

Consumers' beliefs, attitudes and intentions towards genetically modified foods, based on the 'perceived safety vs. benefits' perspective

It has been repeatedly claimed that the application of genetic engineering in the field of agricultural and food production is both beneficial and advantageous. However, biotechnology is developing in an environment where public concerns about food safety and environmental protection are steadily increasing. The present study aims at gaining an insight into Greek consumers’ beliefs, attitudes and intentions towards genetically modified (GM) food products. The objectives of this study are summarized as follows (i) to provide evidence that consumer beliefs are built around the ‘safety‐benefits’ axis, and (ii) to segment the Greek market in terms of consumer beliefs about GM food products and identify a number of clusters with clear‐cut behavioural profiles. Although the overall attitude of Greek consumers towards GM food is negative, the research very interestingly concludes that there exists a market segment of substantial size, whose beliefs about GM food appears to be positive. This finding suggests that there is not a ‘consensus’ regarding the rejection of GM foods in the Greek market as one might have expected thus ‘encouraging’ the implementation of adequate marketing strategies to target this segment of ‘early adopters’ in the first place.     

Upper-bound analysis of the pressure-assisted injection forging of thick-walled tubular components with hollow flanges

An upper-bound analysis of the pressure-assisted injection forging (PAIF) of thick-walled tubular components with hollow flanges was conducted to predict the maximum forming-pressure requirements. The polymeric pressurizing material and the pure aluminium work material employed were assumed to obey the von-Mises’ yield criterion, the two materials being divided into three and six zones, respectively, and described using kinematically admissible velocity fields. An upper-bound solution was derived based on this model. Experiments were conducted to validate the solution. The results suggest that the upper-bound analysis has sufficient accuracy for the prediction of the forming-pressure requirements. Subsequently, a parametric analysis was conducted to study the effects of variation of the principal parameters of the process and the geometry, such as tube thicknesses, flange dimensions and friction, on the forming-force requirements, which showed other useful applications of the upper-bound solutions.