合成介质对PEDOT催化染料敏化太阳电池光阴极性能的影响

采用聚3,4-乙烯二氧噻吩(PEDOT)/FTO为对电极,研究了合成介质对循环伏安法电聚合制备的PEDOT/FTO对电极性能的影响。通过SEM、CV、EIS、Tafel曲线,并首次采用SECM方法对所制备的对电极的电催化性能进行了表征。结果表明:在LiClO4水溶液和1-丁基-3-甲基四氟硼酸盐离子液体(IL)中制备的光阴极具有良好的电催化性能。J-V测试曲线表明,在LiClO4水溶液和IL中制备的光阴极所组装的DSSC器件的光电转化效率分别达6.4%和6.6%,接近于同等条件下以Pt对电极构建的DSSC器件的光电转化效率。     

Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。     

齐次等式约束线性回归模型条件根方估计的效率

对齐次等式约束线性回归模型回归系数的约束最小二乘估计提出改进,引入一种估计的相对效率,证明在一定条件下,狭义条件根方估计、广义条件根方估计的效率均高于约束最小二乘估计的效率．     

移动Sinks无线传感器网络的能量效率分析

能量效率是无线传感器网络的关键性问题,无线传感器网络通过移动sinks节点延长了网络的生命周期。讨论一些关键性要素对能量效率的影响,如簇的大小、移动sinks的速度、数量和数据包生命周期等。分析基于能量效率的单跳、多跳路由模式,提出最优跳数的簇路由模式,并以仿真实验验证移动sinks无线传感器网络的系统性能。     

交互式《编译原理》教学模式探讨

针对《编译原理》课程教学中存在的主要问题,分析该课程教学的特点,提出交互式教学的主要思路和实施方案。交互式教学的目的是培养学生主动思维、团队合作精神,激发学生的学习的兴趣,提高学生的编程能力,使学生真正掌握课程的精髓。     

Evaluation of the effect of a paver’s trolley on productivity, task demands, workload and local discomfort

The objective of this study was to determine the differences in the number of paving stones laid (productivity), task demands, energetic workload, body region discomfort and preference when laying paving stones with or without use of a paver’s trolley (n = 8) in a within-subject controlled study of pavers. The number of paving stones laid and the task demands were measured by means of systematic observations at the workplace. The energetic workload was determined using the percentage of heart rate reserve (%HRR). Body region discomfort was measured using visual analog scales, and the workers’ preference was ascertained via interview. The use of a paver’s trolley had no effect on productivity, %HRR or body region discomfort compared to working without a paver’s trolley. The duration of knee-straining activities did not differ between working with (141 min) and without (146 min) the paver’s trolley. However, six of the eight pavers indicated that, given suitable circumstances, they wanted to use the paver’s trolley.

Relevance to industry

To reduce the chance of work-related low back and knee complaints among pavers, the duration, frequency and intensity of lower back and knee-straining activities should be limited by means of technical measures such as mechanical paving. The paver’s trolley does not appear to reduce knee-straining activities and therefore does not appear useful in reducing the risk of knee complaints and disorders.     

Towards a Mobile Code Management Environment for Complex,Real-Time,Distributed Systems

We present a novel mobile code management environment,currently under design and development. Our design employs anopen architecture, suitable for ``plug-and-play' with COTS andother groups' tools. While we have studied new algorithms, costand objective functions, and other fundamental issues, the maincontribution of this experimental research work is in the environmentitself. It should be noted that networked platforms, such asthe World Wide Web, are inherently not suitable for traditional,predictable real-time applications. Thus, real-time concernsnecessarily need to be blended with others concerns, and thetarget applications, making use of our environment, will toobe a blend of partially hard real-time and partially (or mostly)soft-real- time ones. The prototype environment will thereforesupport performance-based analysis and management focusing notonly on predictability but also on compilation, efficiency, safetyand other tradeoffs. We have selected the Java language and itsbytecode format as a representation for mobile code as well asa language for our implementation.     

A base62 transformation format of ISO 10646 for multilingual identifiers

ISO 10646 Universal Character Set (UCS) is a 31‐bit coding architecture that covers symbols in most of the world's written languages. Identifiers in programming languages are usually defined by using alphanumeric characters of ASCII, which represent mainly English words. An approach for working around this deficiency is to encode multilingual identifiers into the alphanumeric range of ASCII. For case‐sensitive languages, an encoding that utilizes [0–9][A–Z][a–z] can be more space‐efficient for multilingual identifiers. This paper proposes a base62 transformation format of ISO 10646 called UTF‐62. The resulting string of UTF‐62 is within a [0–9][A–Z][a–z] range, a total of 62 base characters. UTF‐62 also preserves the lexicographic sorting order of UCS‐4. Copyright © 2001 John Wiley & Sons, Ltd.