Fabrication of gas sensing devices with ZnO nanostructure by the low-temperature oxidation of zinc particles

A method for low-temperature synthesis of a mixture of high-density ZnO nanoflakes and nanowires was developed to produce low-cost and high-efficiency gas sensors with ZnO nanostructures. ZnO nanoflakes and nanowires were grown on glass substrates by the RF sputter deposition of Zn particles and localized oxidation at a low temperature of 300 °C. The synthesized ZnO nanoflakes and nanowires were polycrystalline and had nanometer dimensions, as revealed by X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) measuring. A gas sensor based on the mixture of ZnO nanoflakes/nanowires responded rapidly and sensitively to ethanol. The sensing properties of the ZnO nanostructure sensor were approximately 72% for 50 ppm ethanol gas at an operating temperature of 100 °C. The response to 10 ppm of ethanol gas was 42% at the same temperature.     

表面改性四针状纳米ZnO结构与气敏性能研究

将4种质量分数(5%,10%,20%,30%)的Co(CH3COO)24H2O混合到四针状纳米ZnO原料里,采用超声化学浸泡法制备出表面改性四针状纳米ZnO颗粒。通过XRD和TEM分析了表面改性四针状纳米ZnO结构的物相和形貌特征。随着Co(CH3COO)24H2O质量分数增大,Co3O4相明显出现,Co3O4相沉积在ZnO表面上。研究表明:以表面改性四针状纳米ZnO粉末为原料制备的厚膜气敏元件,与纯ZnO气敏元件相比,Co(CH3COO)24H2O质量分数为5%的气敏元件对酒精和甲醇有较高的灵敏度,并讨论了表面改性对气敏性能的影响。     

Nano-Engineered Carbon Fibre-Based Piezoelectric Smart Composites for Energy Harvesting and Self-Powered Sensing

The integration of piezoelectric materials onto carbon fiber (CF) can add energy harvesting and self-power sensing capabilities enabling great potential for “Internet of Things” (IoT) applications in motion tracking, environmental sensing, and personal portable electronics. Herein, a CF-based smart composite is developed by integrating piezoelectric poly(3,4-ethylenedioxythiophene) (PEDOT)/CuSCN-coated ZnO nanorods onto the CF surfaces with no detrimental effect on the mechanical properties of the composite, forming composites using two different polymer matrices: highly flexible polydimethylsiloxane (PDMS) and more rigid epoxy. The PDMS-coated piezoelectric smart composite can serve as an energy harvester and a self-powered sensor for detecting variations in impact acceleration with increasing output voltage from 1.4 to 7.6 V under impact acceleration from 0.1 to 0.4 m s⁻². Using epoxy as the matrix for a CF-reinforced plastic (CFRP) device with sensing and detection functions produces a voltage varying from 0.27 to 3.53 V when impacted at acceleration from 0.1 to 0.4 m s⁻², with a lower output compared to the PDMS-coated device attributed to the greater stiffness of the matrix. Finally, spatially sensitive detection is demonstrated by positioning two piezoelectric structures at different locations, which can identify the location as well as the level of the impacting force from the fabricated device.     

Plasmon enhancement for Vernier coupled single-mode lasing from ZnO/Pt hybrid microcavities

It is essential to develop a single mode operation and improve the performance of lasing in order to ensure practical applicability of microlasers and nanolasers.In this paper,two hexagonal microteeth with varied nanoscaled air-gaps of a ZnO microcomb are used to construct coupled whispering-gallery cavities.This is done to achieve a stable single mode lasing based on Vernier effect without requiring any complicated or sophisticated manipulation to achieve positioning with nanoscale precision.Optical gain and the corresponding ultraviolet lasing performance were improved greatly through coupling with localized surface plasmons of Pt nanoparticles.The ZnO/Pt hybrid microcavities achieved a seven-fold enhancement of intensity of single mode lasing with higher sidemode suppression ratio and lower threshold.The mechanism that led to this enhancement has been described in detail.     

不同合成过程对溶胶-凝胶法制备的ZnO/Ag纳米复合材料光催化性能的影响

以乙酸锌、硝酸银为前驱体,二乙醇胺作为稳定剂,利用溶胶-凝胶法分别采用一步法和两步法制备得到ZnO以及ZnO/Ag纳米复合粉体。所有ZnO/Ag复合物中Ag的含量均为3%(摩尔分数)。对所制备样品的结构和光学性质通过XRD、SEM、TEM、XPS、PL、UV-vis进行了表征,进而以甲基橙为模拟污染物进行了光催化测试。结果表明,不同方法制备得到的ZnO/Ag纳米粉体晶粒均匀,无明显团聚现象,面心立方结构的金属Ag吸附在纤锌矿结构的ZnO表面形成异质结。与纯ZnO相比,掺Ag极大地改善了样品在紫外光下的光催化活性。对不同合成工艺的比较表明,用溶胶-凝胶一步法制备的ZnO/Ag复合物的光催化活性最高,经紫外光照射70min可完全降解甲基橙。     

Fabrication of ultraviolet photoconductive sensor using a novel aluminium-doped zinc oxide nanorod-nanoflake network thin film prepared via ultrasonic-assisted sol-gel and immersion methods

Unique and novel thin films with aluminium (Al)-doped zinc oxide (ZnO) nanostructures consisting of nanorod-nanoflake networks were prepared for metal-semiconductor-metal (MSM)-type ultraviolet (UV) photoconductive sensor applications. These nanostructures were grown on a glass substrate coated with a seed layer using a combination of ultrasonic-assisted sol-gel and immersion methods. The synthesised ZnO nanorods had diameters varying from 10 to 40 nm. Very thin nanoflake structures were grown vertically and horizontally on top of the nanorod array. The thin film had good ZnO crystallinity with a root mean square roughness of approximately 13.59 nm. The photocurrent properties for the Al-doped ZnO nanorod-nanoflake thin films were more than 1.5 times greater than those of the seed layer when the sensor was illuminated with 365 nm UV light at a density of 5 mA/cm². The responsivity of the device was found to be dependent on the bias voltage. We found that similar photocurrent curves were produced over eight cycles, which indicated that the UV sensing capability of the fabricated sensor was highly reproducible. Our results provide a new approach for utilising the novel structure of Al-doped ZnO thin films with a nanorod-nanoflake network for UV sensor applications. To the best of our knowledge, UV photoconductive sensors using Al-doped ZnO thin films with a nanorod-nanoflake network have not yet been reported.     

Impact of ZnO gate interfacial layer on piezoelectric response of AlGaN/GaN C-HEMT based ring gate capacitor

We report on a piezoelectric response investigation of AlGaN/GaN circular high electron mobility transistor (C-HEMT) based ring gate capacitor as a new stress sensor device to be potentially applied for dynamic high-pressure sensing. A ring gate capacitor of C-HEMT with an additional ZnO gate interfacial layer was used to measure the changes in the piezoelectric charge induced directly by the variation of piezoelectric polarization of both gate piezoelectric layers (AlGaN, ZnO) for harmonic loading at different excitation frequences. Our experimental results show that about 10 nm thick piezoelectric ZnO layer grown on ring gate/AlGaN interface of C-HEMT can yield almost a 60% increase in the piezoelectric detection sensitivity of the device due to its higher piezoelectric coefficient. A three-dimensional CoventorWare simulation is carried out to confirm the increase in the measured piezoelectric response of ZnO based ring gate capacitor of C-HEMT.     

Enhanced surface plasmon resonance detection of DNA hybridization based on ZnO nanorod arrays

We demonstrated an enhanced surface plasmon resonance detection incorporating ZnO nanorod arrays (NRAs) built on a thin gold film. ZnO NRAs were fabricated by wet chemical growth method and used for the detection of DNA hybridization. Experimental results exhibited that ZnO NRAs provided a notable sensitivity improvement by more than 3 times, which is attributed to an increase in the surface reaction area. The measured sensitivity enhancement matched well with the numerical analyses based on the effective medium theory. Our approach is intended to show the feasibility and extend the applicability of the ZnO-based SPR biosensor to diverse biomolecular binding events.     

Synthesis of quantum size ZnO crystals and their gas sensing properties for NO2

Quantum size ZnO crystals have been synthesized successfully by a room temperature sol-gel process. Oleic acid (OA) has been used as capping agent to control the particle size of ZnO. The crystal structure and size of the ZnO are characterized by the X-ray diffraction (XRD) and transmission electron microscope (TEM). The XRD results show the as-synthesized ZnO has hexagonal wurtzite structure and the average crystallite size is 5.7 nm which is little less than TEM result. It is testified by photoluminescence (PL) and Raman spectra that the quantum size ZnO keeps the crystal structure of the bulk ZnO and possesses more surface defects. The quantum size ZnO has the highest response of 280 to NO₂ and the highest selectivity of 31 and 49 corresponding to CO and CH₄ at operating temperature of 290 °C. The effect of calcination temperatures on sensing property and transient response of the ZnO sensor are also investigated.