管式振荡流反应器的流动模式研究 (II)高振荡强度下的流动模型和模拟

根据高振荡强度下的粒子成像流场可视化实验结果,在分析振荡流场中漩涡结构特征的基础上,提出用带有二次流区的全混腔室和室间返混的多釜串联模型来表征高振荡强度下的管式振荡流反应器流动特性。根据停留时间分布实验结果,运用小生境遗传算法优化求解模型参数与振荡参数之间的定量关系。模拟计算表明,优化后的模型给出的停留时间分布曲线与实验结果吻合良好。     

热管式反应器的应用研究进展

概述了热管式反应器的特点,对热管式反应器在各类工艺过程中的应用研究现状进行了综述。     

Gas hold-up in highly viscous pseudoplastic non-newtonian solutions in three phase sparged reactors

Gas hold-up structure was studied in a three phase sparged reactor of 200 mm diameter. Air and aqueous solutions of carboxymethyl cellulose were used as gas and liquid phases. Spherical glass beads formed the solid phase. The superficial gas velocity, rheological properties, particle size and solid loading were varied over a wide range and their effects on gas hold-up structure were studied. A correlation for the estimation of the gas hold-up as a function of superficial gas velocity, apparent liquid viscosity, particle settling velocity and solid loading was established.     

固定化紫草细胞生产紫草宁衍生物

用海藻胶包埋紫草细胞,在紫草色素生产培养基M_9中,常温、黑暗下培养不同时间,收集培养液并提取色素,进行紫外—可见全波长分光光度扫描和TLC分析。结果表明:固定化紫草细胞可连续分泌紫草色素,其主要成分与天然成分基本相同,产量已达到一定水平。此外对海藻胶包埋条件、固定化珠粒的稳定性以及1L固定化植物细胞反应器生产紫草色素工艺进行了讨论。     

在役加氢反应器材料损伤分析

基于随加氢反应器运行 5a的试验试块 ,研究了加氢反应器运行 5a后筒体材料 2 .2 5Cr 1Mo钢的损伤。进行了化学成分分析、拉伸和冲击试验、脱氢和脱脆试验以及断口形貌分析。结果表明 :反应器运行 5a后筒体母材及其焊缝金属的拉伸性能未发生明显变化 ,而冲击韧性明显降低 ,且焊缝金属损伤程度较母材严重。经分析 ,材料的损伤主要是加氢反应器长期使用过程中高温回火所致     

圆盘反应器中的PET缩聚过程

利用薄膜实验研究了PET缩聚过程反应和传质规律 ,建立了链增长、链降解反应动力学模型和泡沫脱挥时的传质速率方程 ;通过冷模实验研究了圆盘反应器中PET的混合、流动、成膜、膜表面更新以及传质规律 ;综合了反应和反应器研究结果 ,建立了圆盘反应器中的PET缩聚过程模型 ,对圆盘反应器中的PET缩聚过程进行了仿真分析 ,考察了温度、压力、停留时间、转速、催化剂浓度、负荷大小等各种因素的影响     

Understanding heterogeneous catalysis on an atomic scale: a combined surface science and reactivity investigation for the dehydrogenation of ethylbenzene over iron oxide catalysts

In order to study the dehydrogenation of ethylbenzene to styrene, epitaxial iron oxide model catalyst films with Fe₃O₄(111), -Fe₂O₃(0001) and KFe _x O _y (111) stoichiometry were prepared in single crystal quality on Pt(111). They were investigated using surface science techniques before and after atmospheric pressure reaction experiments in a newly designed single crystal flow reactor. As expected from low-pressure measurements, Fe₃O₄(111) is catalytically inactive. The catalytic activity of -Fe₂O₃(0001) starts after an activation period of about 45 min. After that, the surface is essentially clean but shows a high concentration of defects. On the potassium-promoted films, however, the activation period is much longer, the activity then is higher and the surface gets covered completely with carbon and oxygen during reaction. This indicates a different reaction pathway on the promoted films with a carbon–oxygen species as catalytically active species.     

等离子体煤气化反应器内部流动数值模拟及设计优化的初步研究

本文对一种等离子体煤气化反应器内部湍流、两相流动和燃烧化学反应等复杂流动现象进行了三维数值模拟 ,得出了其内部的温度分布、速度分布和组分浓度分布 ,在对计算结果进行分析的基础上 ,提出了等离子体煤气化反应器的一种优化设计方案 ,并对此方案进行了不同等离子体流速下的数值模拟和比较分析 ,以确定气流参数的最佳匹配 ;数值分析结果表明 :改进的设计方案和气流参数匹配提高了等离子体热源利用的效率和煤气转化的效率     

Flow regime, hydrodynamics, floc size distribution and sludge properties in activated sludge bubble column, air-lift and aerated stirred reactors

This paper presents a comparative study how reactor configuration, sludge loading and air flowrate affect flow regimes, hydrodynamics, floc size distribution and sludge solids-liquid separation properties. Three reactor configurations were studied in bench scale activated sludge bubble column reactor (BCR), air-lift reactor (ALR) and aerated stirred reactor (ASR). The ASR demonstrated the highest capacity of gas holdup and resistance, and homogeneity in flow regimes and shearing forces, resulting in producing large numbers of small and compact flocs. The fluid dynamics in the ALR created regularly directed recirculation forces to enhance the gas holdup and sludge flocculation. The BCR distributed a high turbulent flow regime and non-homogeneity in gas holdup and mixing, and generated large numbers of larger and looser flocs. The sludge size distributions, compressibility and settleability were significantly influenced by the reactor configurations associated with the flow regimes and hydrodynamics.     

Optimal temperature policies for catalytic transport reactors under periodic operation

The influence of inlet gas concentration cycling on the optimal temperature policy of catalytic transport reactors is studied theoretically. The model considered is based on plug flow of gas and catalyst particles with negligible interand intra-particle diffusional resistances and concentration dependent deactivation kinetics. To utilise the concentration of the reactant and the activity of the deactivating catalyst fully a proper temperature sequence along the reactor is needed. Thus, a general optimal temperature policy using the continuous minimum principle is derived for the reactor under periodic operation. The model equations are solved analytically for gas concentration, activity and temperature profiles. Resonance behaviour (maximum in conversion with pulse width) is obtained using the optimal temperature policy for certain sets of parameters. The effects of activation energy groups, reaction and deactivation constant groups and inlet temperature on the optimal temperature policy under periodic operation are evaluated. In all cases an improvement in conversion with the optimal temperature policy under periodic operation over that with an isothermal policy under periodic operation is obtained. A suboptimal policy, comprising constant temperature over different reactor sections, which is useful for implementation purposes is also discussed.