Effect of H2O2 addition mode on enzymatic removal of phenol from wastewater in the presence of polyethylene glycol

The effect of batch and semi-batch additions of the stoichiometric amount of H₂O₂ on enzymatic removal of phenol has been studied over the phenol concentration range of 1-10 mmol/L. It is found that the ratio between the maximum H₂O₂ concentration during the reaction and the initial horseradish peroxidase concentration ((H₂O₂)_max/(HRP)_o) controls the rate of phenol removal by horseradish peroxidase in the presence of the additive, polyethylene glycol. An optimum range of this ratio is determined to be between 10 and 25 μmol/U. Empirical models are proposed to predict the values of (H₂O₂)_max/(HRP)_o required to treat given phenol concentrations under different modes for adding H₂O₂.     

乳液聚合螺旋半园管夹套反应釜

本文将螺旋半园管夹套反应釜与传统的夹套反应釜进行了对比 ,并介绍了螺旋半园管夹套釜在乳液聚合中的应用     

反应器网络综合优化方法的研究进展

反应器网络综合优化方法在选择反应器类型和反应工艺条件时,比传统的方法表现出了很大的优势。综述了各类反应器网络综合优化方法的基本原理和研究进展,并分析了它们的优缺点。这些方法有基于过程特征的方法,包括可得区法和导数分析法;超结构优化法;目标类方法,包括目标法、构造目标法和构造MINLP法;以及经验推断法和分布参数法等。最后分析了这方面研究的发展趋势。     

Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor

A model of continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuous stirred tank reactor is developed using phase equilibria assumption and the method of molecular weight moments. The model equations can be simplified into a polynomial system that has 17 equations and 17 unknowns. Solution of the polynomial system gives out almost every aspects of the continuous transesterification process. Molecular weight and polydispersity index, end group ratio of hydroxyl to phenyl carbonate, contents of molecular species, and lost diphenyl carbonate fractions are studied in different operation parameters.     

Optimization of anodic oxidation and Cu–Cr oxide catalyst preparation on structured aluminum plates processed by electro discharge machining

This paper describes the optimization of three processes applied in fabrication of a microstructured reactor for complete oxidation of volatile organic compounds. The first process involves the optimization of the electro discharge machining (EDM) method to produce a set of microchannels with a high length to diameter ratio of 100, with a standard deviation from the average diameter below 0.2%, and with a surface roughness not higher than 2.0 μm. To satisfy these criteria, fabrication of microchannels must be carried out with two machining passes in the Al51st alloy. Then, the effect of several parameters on the anodization current efficiency with respect to oxide formation was studied. The best process conditions to get a 30 μm porous alumina layer in a 0.4 M oxalic acid electrolyte, were found to be a temperature of 1 °C, an anodic current density of 5 mA/cm², and 23 h oxidation time. At last, the resulting coatings were impregnated with an aqueous solution of copper dichromate followed by drying and calcination at 450 °C to produce active catalysts. The effect of a copper dichromate concentration, number of impregnation cycles (1 or 2), and different after-treatments on catalytic activity and stability in complete oxidation of n-butane were studied. The catalytic activity of the obtained coatings is superior to that of alumina supported pelletized catalysts even at much lower loadings of active metals.     

Syngas production via combined oxy-CO2 reforming of methane over Gd2O3-modified Ni/SiO2 catalysts in a fluidized-bed reactor

In this research, Ni/SiO₂ catalyst was modified with different amount of Gd₂O₃ and characterized with temperature-programmed desorption of CO₂ (CO₂-TPD) and NH₃ (NH₃-TPD), temperature-programmed reduction with H₂ (H₂-TPR) and X-ray diffraction (XRD). It was found that Gd₂O₃-modified Ni/SiO₂ catalysts possessed higher CO₂ adsorption and activation ability due to the formation of surface carbonate species. H₂-TPR and XRD characterizations found that the strong interaction among nickel, Gd₂O₃ and SiO₂ took place, which improved the dispersion of Ni. Gd₂O₃-modified Ni/SiO₂ catalysts exhibited higher activity and stability for the combined oxy-CO₂ reforming of methane in fluidized-bed reactor. The H₂/CO ratio in produced syngas could be controlled via controlling reaction temperature and CO₂/O₂ ratio in feed.     

间歇式液相本体聚丙烯装置计算机控制与管理系统

介绍一种间歇式液相本体聚丙烯装置计算机先进控制与管理系统。它是由“基本控制层”和“上位控制层”构成的经济适用型集散控制装置。该装置采用了多屏显示技术、网络通讯技术、PLC程控技术、ActiveX控件技术和面向对象程序设计方法、数据库技术以及闭环辩识、预测控制、反应优化、底层PID控制与上层先进控制无扰动自动切换等多种技术和控制方式，因而可以灵活有效地实现聚合反应的全过程自动化生产和安全保护。     

Quantitative measurement of gas hold-up distribution in a stirred chemical reactor using X-ray cone-beam computed tomography

Cone-beam type X-ray computed tomography (CBCT) is a potential method to measure three-dimensional phase distributions in vessels. An example for that is the measurement of gas profiles in stirred chemical reactors. Such data are highly valuable for the assessment and evaluation of chemical processes, for optimisation of the reactor and stirrer design, and for evaluation of computational fluid dynamics codes used to model the fluid flow and heat transfer in reactive systems. However, there are considerable difficulties for accurate quantitative measurements due to beam hardening and radiation scattering effects. In a theoretical and experimental work we have investigated the non-linear effects of both physical phenomena and developed a suitable measurement setup as well as calibration and software correction methods to achieve a highly accurate measurement of void fraction profiles with CBCT.     

乙烯裂解炉内传递和反应过程综合数值模拟Ⅱ.反应管内传递和反应过程的数值模拟

采用乙烯裂解炉传递反应过程综合数学模型中的反应管数学模型，对工业裂解炉反应管进行了系统的数值模拟，得到了反应管内流场、温度场和浓度场的详细信息，揭示了反应管内流动、传热、传质和裂解反应的基本特点。模拟结果表明，沿反应管轴向油气吸热升温，裂解反应加剧，产物产率逐渐发生变化；沿反应管径向存在明显的流体流速和温度的变化，而产物产率的变化不如流体流速和温度的变化明显。通过比较湍流粘度和分子粘度的大小，认为29．975～30mm的径向区域为层流层，层流层的存在使得临近管壁的区域内流体流速和温度变化显著。     

Adaptation of the microscopic properties of redox catalysts to the type of gas-solid reactor

Catalysts of selective oxidation usually work in a simultaneous redox mode in reactant/air cofed reactors. The solid must provide selective lattice oxygen according to a kinetic mechanism depending on operating conditions that differ from one reactor to another. Better catalytic performance can be obtained in a recirculating solids reactor because it allows separate optimization of the reduction and oxidation steps. Among the microscopic properties of the catalyst, the crystal morphology is to be taken into account because it influences its reactivity on stream. These considerations lead to a new approach of the catalyst-reaction-reactor trio.