溶胶－凝胶二氧化硅驻极体薄膜的物理化学改性

实验研究了由溶胶－凝胶法制备二氧化硅驻极体薄膜的工艺。用红外透射谱、扫描电子显微镜以及驻极体等温表面电位测量和热刺激放电等实验考察了热处理和化学表面修正两个关键工艺对溶胶－凝胶二氧化硅样品驻极体性能的影响。结果表明经过高温条件下一定时间的热处理和化学表面修正，可以制备出性能优良的驻极体薄膜     

A structure/function study of polyaminoamide dendrimers as silica scale growth inhibitors

Dendrimers have attracted immense attention during the last decade due to their interesting properties both from a basic and an applied research viewpoint. Encapsulation of metal nanoparticles for catalysis, drug delivery and light harvesting are only some applications of dendrimers that are breaking new ground. A novel application of dendrimer technology is described in the present paper that relates to industrial water treatment. Industrial water systems often suffer from undesirable inorganic deposits. These can form either in the bulk or on metallic surfaces, such as heat exchangers or pipelines. Silica (SiO₂) scale formation and deposition is a major problem in high‐silica‐containing cooling waters. Scale prevention rather than removal is highly desired. In this paper, benchtop screening tests on various silica inhibition chemistries are reported, with emphasis on materials with a dendrimeric structure. Specifically, the inhibition properties of commercially available STARBURST^® polyaminoamide (PAMAM) dendrimers generations 0.5, 1, 1.5, 2, and 2.5 are investigated in detail together with other commonly‐used scale inhibitors. Experimental results show that inhibition efficiency largely depends on structural features of PAMAM dendrimers such as generation number and nature of the end groups. PAMAM dendrimers are effective inhibitors of silica scale growth at 40 ppm dosage levels. PAMAM dendrimers also act as silica nucleators, forming SiO₂–PAMAM composites. This occurs because the SiO₂ formed by incomplete inhibition interacts with cationic PAMAM‐1 and ‐2. The general scope of silica formation and inhibition in industrial waters is also discussed. Copyright © 2005 Society of Chemical Industry     

上马水库地裂缝成因及工程处理措施探讨

文中着重阐述了上马水库库坝区的地裂缝产生的原因及发育规律,分析了地裂缝对水库的直接危害,为水库除险加固设计提供了指导,并提出了切实可行的工程处理措施建议。     

全断面双护盾掘进机在引黄工程断层破碎带的卡机处理

万家寨引黄工程国际Ⅱ、Ⅲ标已查明的断层有34条，隐伏断层可能还有一些，除了利民堡区域性大断层（F32）外，较大的集中于7#洞北段59＋700—68＋820，主要有F65、F70、F90、F74。全断面双护盾掘进机适应于较复杂的地质条件，因此在通过断层破碎带时一般都较正常。但在通过引黄工程区域性大断层F65时，发生了卡机事故，处理用了3个月时间。该文对处理TBM卡机事故的施工进行了总结。     

Development of materials database system for cae system of heat treatment based on data mining technology

Computer simulation for materials processing needs of materials. In order to employ the accumulated large data on a huge database containing a great deal of various physical properties materials heat treatment in the past years, it is significant to develop an intelligent database system. Based on the data mining technology for data analysis, an intelligent database web tool system of computer simulation for heat treatment process named as IndBASEweb-HT was built up. The architecture and the arithmetic of this system as well as its application were introduced.     

Tribology of nitriding layer, TiN coatings and their complex on AISI D2 steel

The sliding wear and impact wear resistances of D2 steel with nitriding layer, PVD titanium nitride coating and their duplex treatment were investigated. The experimental results suggest that the duplex treatment has the best sliding and impact wear resistances under experimental conditions. And the wear resistance of PVD titanium nitride is better than that of nitriding. The impact wear resistance and wear mechanism of all three surface layers remain unchanged under impact load of 0.2 J or 1 J. All samples end with the same symptom of flaking.     

浅谈大旺工业园道路软土路基勘察及处治设计

通过勘探和土工试验揭示肇庆高新技术产业开发区沙沥工业园区规划道路所在区域的地质状况,分析其软弱土层工程力学性质,并提出有效的软基处理措施,可供类似工程参考。     

纤维表面处理对植物纤维增强水泥的物理力学性能影响

植物纤维增强水泥的力学性能具有湿敏感性，随湿度增加弯曲强度下降幅度较大。本文工作采用的几种浸渍处理纤维表面的方法，有效地改善了这种状况，其中一种经处理的纤维增强水泥较没有处理的对比试样在饱水状态下的弯曲强度提高了67％，气干状态提高了18％，缩小了二者间的差距。     

Model of the influence of time and mild temperature on Listeria monocytogenes nonlinear survival curves

Heat treatment has long been regarded as one of the most widely used and most effective means of destroying pathogens in food. Up to now the linear relationship between the death rate and the temperature has been used when choosing the best heat treatment to apply. However, the information given by this linear relationship is no longer sufficient when nonlinear survival curves are observed. Consequently, the agri-food industry needs a tool to choose the best mild heat treatment to apply in the case of nonlinear survival curves. This study deals with the temperature-induced death of Listeria monocytogenes CIP 7831 in the stationary phase of growth. Eleven temperatures were tested. With the proposed primary and secondary models good fits of our data were obtained. A model describing both the effect of the duration of treatment and the temperature on the logarithm of the number of survivors was then built. A clear increase in the precision of the estimation of the parameters was obtained with this model. Moreover, with this model a new graphical strategy to choose a mild heat increase regarding a maximal survivor number has been proposed.     

Rheological behaviour of processed avocado pulp emulsions

Shear rate vs. shear stress data were obtained on avocado pulp in water emulsions using a concentric cylinder rheometer and fitted to a power law model. Dilution, as volume fraction of water, had a pronounced effect on the apparent viscosity of the pulp emulsions and the Richardson equation, (η_R= exp.( a φ) for the emulsion viscosity fitted the data well. A mean slope coefficient, a , of 4.57 can be used as a first approximation. Enzymatic treatment (40°C, 1 h), is slightly more effective than thermal treatment (65°C, 1 h), in reducing the initial apparent viscosity of the pulp-water emulsions