空压机国产节能增产内件投用总结

为提高合成氨的产量，对空压机作节能增产改造。介绍空压机国产节能增产件的特点、安装和大修情况，并通过机械性能和热力性能考核结果，说明国产件已基本达到预期目的     

二氧化碳激光熔铸技术在氨压缩机曲轴修复中的应用

用连续输出功率在千瓦级的二氧化碳激光器 ,激光功率密度达到 (10 4～ 10 5)W·cm-2 时 ,对铁基材料表面进行熔铸 ,讨论了激光熔铸修复工艺 ,论述了对修复件强度、表面硬度和抗磨性能、残余应力的影响。     

无油螺杆压缩机在燃料电池中的应用

由于环境污染、全球变暖、能源短缺等各方面原因,能量转换效率高且无污染的燃料电池汽车备受人们的青睐,作为燃料电池系统中重要部件之一的空气压缩机也成为研究的热点。西安交通大学压缩机研究所成功研制了可以应用于燃料电池的LG300型喷水螺杆空气压缩机以及具有体积小、质量轻、效率高的高速干式螺杆压缩机、膨胀机,并且经过与燃料电池系统配套使用,获得成功。     

压缩机废油回收工艺小结

介绍了压缩机废油回收的原理、工艺及操作要点,达到了节油降耗的目的。     

燃气轮机压气机清洗技术

介绍了燃气轮机压气机清洗维护的常用清洗剂、清洗方法及其特点，以及工业燃气轮机所惯用的清洗方法     

小型轴流压气机清洗两相流场的数值模拟

针对某小型航空发动机单级轴流压气机的清洗需求,以数值模拟结合实验的方法对压气机清洗流场的各种参数进行了分析研究.在初步确定清洗方案的基础上,建立了基于S-A湍流模型的离散相数值模拟理论模型,以经验公式估算喷嘴形成的初始液滴分布,并对喷嘴的实验参数进行了校准,最后以CFD软件进行了流场的数值模拟,计算结果表明：清洗液滴不会对压气机的流场产生明显影响,平面扇形喷嘴在该小型压气机上能获得较好的清洗效果.     

煤焦小型氮肥厂采用离心压缩机联产4万吨/年低压甲醇设计

小氮肥厂采用离心压缩机对合成氨进行技术改造,联产4万吨/年低压法经济型甲醇,是煤化工C_1化学产品的发展方向。     

裂解气压缩机级间注水技术的应用

介绍了裂解气压缩机由注洗油改为注水情况，进而得出结论：改注水降温效果明显，压缩机工作效能可得到有效保障。     

Air-source heat pump coupled with economized vapor injection scroll compressor and ejector:Design and experimental research

Ejector can utilize high pressure energy from liquid mechanism,it can be used in heat pump system coupled with economized vapor injection(EVI)scroll compressor.When running under low temperature conditions,the performance of the EVI system with ejector can be improved further.In this paper,the design method of the heat pump system with ejector is presented,and the process for designing the heat pump with ejector(EVIe)was summarized.One prototype heat pump was designed under the condition of the evaporation ...     

Effects of circumferential configuration concerning splitter blade on the aerodynamic performance in a transonic axial fan

For a certain type of transonic axial fan, the flow field of a fan rotor with splitter blade was computed by numerical simulation, and the shape of the rotor was modified. The effects of different circumferential distributions concerning the splitter cascades upon the aerodynamic performance were investigated. The studies show that the optimum splitter cascade is not very close to the suction side of main blade. The load between the main blade and the splitter blade can be soundly distributed in terms of the adjustment of circumferential position of the splitter blade. The best aerodynamic performance can be successfully obtained according to the optimum shape of the expanding fluid channel reasonably formed by the splitter blade and the main blade.