一个矢量形式的双圆弧插值算法

本文在分析数控插补最常用的双圆弧插值算法特点的基础上，将以局部坐标系中的三角运算为核心的传统双圆弧插值算法，改造成为以整体坐标系中的线性运算为核心的矢量形式的双圆弧插值算法，从而减少了计算的复杂性和程序的复杂性，提高了效率和可靠性。     

利用钨极氩弧焊技术修复1#汽轮机转子的实践

本文主要介绍了我厂利用钨极氩弧焊将1#发电机组汽轮机转子修复的工艺过程.     

A study of arc stability of basic electrode in view of uniform design method

In order to develop a basic electrode with low fume and good usability, a uew slag system has been designed after analyzing several basic electrode slag systems. Then in view of uniform design method, arranging the experiment points by it, the influenced laws of the uew system coating compouents on the arc stability had been searched. In the formula, niue coating compouents were taken as independent variables and they were divided into six levels in all twenty-four experiments. The arc stability was taken as function and taken down the data when welding and then put them into the computer to be processed statistically. The analysis results give the mathematical model and trend diagrams between independent variables and the function. They indicate that the effects of many coating compouents on the arc stability are in the mutual form. The mutual effects between CaCO3 and BaF2, BaF2 and BaCO3 , increases the arc stability separately. While the mutual effects between CaF2 and iron powder, the square item of iron powder itself decreases the arc stability separately.     

特高压快速接地开关的研制

特高压输电线路上,潜供电弧对线路产生的影响不容忽视,潜供电弧的顺利熄灭是实现单相自动重合闸的必要条件.稳态下潜供电流和恢复电压幅值是潜供电弧熄灭的两个决定性因素.快速接地开关作为重要的电器设备,越来越多的应用于电力系统中.快速接地开关除了在系统发生故障时接地外,还能快速关合潜供电流和降低恢复电压.本文根据750kV系统潜供电弧的特点和熄弧要求,研制了一种快速接地开关,着重对触头系统进行了研究,计算了触头压力、触头电动力及断口开距的大小,给出了快速接地开关整体设计思路和结构图.     

MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

电弧炉采用石灰石单渣冶炼工艺的研究

采用优质石灰石取代质量差的白灰 ,进行了单渣电弧炉熔炼。结果表明 ,钢水成本降低 ,钢水质量提高 ,取得了良好的效果。     

变压器事故原因分析

通过分析一次变压器事故的原因。指出变压器实际运行中存在的问题。并结合自己的工作经验提出科学的改进建议。     

钻机绞车滚筒体的窄间隙埋弧焊

针对钻机绞车滚筒体采用手工电弧焊工人劳动强度大、焊接效率低、质量不稳定及返修率高等问题,研制了钻机绞车滚筒体窄间隙埋弧焊专机。该专机由ESAB—A2埋弧焊电源和焊接小车、窄间隙焊头、滚轮架、防窜装置、旋转地线夹、三维焊接工作台、焊剂自动回收机组成。使用表明,采用该焊机焊接的滚筒体焊缝质量完全符合设计要求,合格率100%,焊接效率比原来提高6倍。每件滚筒体的焊接可降低人工成本约80%。     

用Ar气制备C—60的研究

在ｋｒａｔｓｃｈｍｅｒ碳弧法中用Ａｒ代替Ｈｅ制出Ｃ－６０。研究了Ａｒ压力为１．３３－９０．６４ｋＰａ时产的Ｃ－６０碳灰，功率消耗，提取率等的关系，并与用Ｈｅ制Ｃ－６０作了比较。     

铸造Ti—0.2Pd合金SF—1000双级风机叶轮的研制

Ｔｉ－０．２Ｐｄ合金ＳＦ－１０００双级风机叶轮是大型盐酸再生设备的主要部件，采用整体铸造方法制造，无论在技术上还是经济上都是十分有利的。本文主要介绍采用加工石墨，铸铁组合型，真空电弧凝壳熔炼铸造工艺，成功地研制出整体铸造风机叶轮。