没食子酸异戊酯的合成研究

以壳聚糖硫酸盐为催化剂，用没食子酸与异戊酸直接酯化合成了没食子酸异戊酯，用正交试验确定了酸酸物质的量比、催化剂用量、反应时间对没食子酸异戊酯收率的影响。得到了最佳工艺条件：醇酸物质的量比为10：1，催化剂用量为1．0g，反应时间为4h，没食子酸异戊酯的收率可达96．2％。实验表明，该催化剂用于合成没食子酸异戊酯具有极好的催化活性和重复使用性。     

铬酸酐副产物硫酸氢钠的利用

对生产铬酸酐时副产的含铬硫酸氢钠的利用作了评论，介绍了8种方法，即，化学沉淀法、磷酸沉淀法、铬酸铬法、电解氧化法、过硫酸钠氧化法、制商品硫酸氢钠、酸泥制碱式硫酸铬、硫酸氢钠制碱式硫酸铬，其中以化学沉淀法、磷酸沉淀法和铬酸铬法应用最广。     

Crystallography and equilibrium solubility for ammonium and potassium orthophosphites and hypophosphites

The composition and solubility properties of eight ammonium and potassium orthophosphites and hypophosphites were determined to evaluate the potential of these classes of materials for increasing the plant nutrient content of liquid fertilizers. Phase relationships for the systems (NH₄)₂O-P₂O₃-H₂O, K₂O-P₂O₃-H₂O, (NH₄)₂O-P₂O-H₂O, and K₂O-P₂O-H₂O were determined along with the crystallographic properties (X-ray and optical) of the solid phases. Toxicity and phosphite response was tested in greenhouse experiments for the compounds.     

铝电解电容器用新型宽温高压工作电解液

采用异癸二酸铵为主溶质,乙二醇和γ-丁内酯为复合溶剂,制备新型宽温(-40~105℃)、高压(400 V)铝电解电容器工作电解液,并检测了该电解液和用该电解液生产的电解电容器的性能。测试结果表明,该工作电解液25℃时电导率达到1.6 mS/cm,闪火电压为480 V,-40℃下未见晶体析出;CD 110/400 V铝电解电容器试样的漏电流≤10μA,损耗0.03,容量变化率只有-3%。经过105℃高温贮存250 h后各项电气性能不仅优于国家标准,而且能达到严格的企业标准。     

Heat-release mechanism in ammonium dinitramide flame

To verify the adequacy of various models of heat release in ammonium dinitramide flame to real processes, chemical processes in products of thermal decomposition at a pressure of 10 torr and in ammonium dinitramide [ADN; NH₄N(NO₂)₂] flame at a pressure of 0.4 to 60 atm are numerically simulated. The calculations are performed on the basis of a detailed kinetic mechanism and boundary conditions correlated with experimental data, thermodynamic properties, and chemical composition of ADN. The kinetic mechanism includes submechanisms that describe high-temperature chemical processes in NH₃/N₂O/NO/NO₂/HNO₂/HNO₃ and NH₃/HN(NO₂)₂ mixtures, and the global stages of aerosol decomposition. Based on calculated and experimental data, the role of dinitraminic acid HN(NO₂)₂, aerosols, and ADN vapor in heat release in the ADN flame zone adjacent to the burning surface is estimated. The calculations predict that the main source of heat release in the cold flame zone at p ≥ 3 atm is dinitraminic acid incoming through the channel of dissociative evaporation ADN_liq → NH₃ + HN(NO₂)₂ from the burning surface. In the high-temperature flame zone, heat release is caused by the reaction that occurs in the NH₃/N₂O/NO/NO₂/HNO₂/HNO₃ mixture. At moderate pressures, the high-temperature and low-temperature zones are separated by an induction zone. The stage governing production of the OH radical, which plays an important role in combustion, in the induction zone is the reaction HNO₃ + M → OH + NO₂ + M. Because of a high activation energy of the stage, small temperature perturbations in the induction zone at low pressures lead to a finite change in the stand-off distance between the high-temperature flame zone and the burning surface. Therefore, small temperature perturbations in the induction zone, which are caused by admixtures in the sample or by heat transfer between the reacting gas and the ambient medium, may be responsible for disagreement between various experimental data and between experimental and calculated data on the stand-off distance between the high-temperature flame zone and the burning surface. In numerical calculations, the position of the high-temperature zone is effectively controlled by varying rate constants of elementary stages within admissible limits. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 5, pp. 64–76, September–October, 2007.     

硫酸软骨素生产工艺的优化

以鸡胸软骨为原料,采用稀碱和酶解相结合的方法提取硫酸软骨素.综合考察各种影响因素,设计了正交实验,得出最佳工艺条件.通过该优化条件,产量可以达到21%,与原来的工艺相比,提高了3%～4%,纯度可以达到80%.     

Mussoorrie rock phosphate-pyrite mixture as phosphate fertilizer

Mussoorrie rock phosphate (MRP), MRP + pyrite (25% by weight), diammonium phosphate (DAP), ammonium polyphosphate (APP) and nitrophosphate (NP) were compared in a field experiment as fertilizers for wheat. At 20 kg P ha^–1, MRP was only 6 per cent as effective as DAP. However, when it was mixed with pyrite, the efficiency of MRP increased to 64 per cent at 20 kg P ha^–1 compared with 97 per cent at 40 kg P ha^–1. The P requirement for a targeted yield for 4.5 t ha^–1 decreased from 39.4 kg P ha^–1 as MRP to 23.7 kg P ha^–1 as MRP + pyrite. Of the other P fertilizers studied, NP was as effective as DAP, whereas APP was 9 to 37 per cent more effective than DAP. However, the P requirement as DAP, NP and APP for a targeted yield of 4.5 t ha^–1 was similar (11 ± 0.5 kg P ha^–1).     

2，5-二氨基甲苯系列产品合成技术的研究与进展

在系统介绍2,5-二氨基甲苯基本合成方法的基础上,以经济、环保和新型工业化作要求,重点评述了各种方法的工艺特点、研究中的技术进展以及实施商品化生产的可行性。结果表明,以邻甲苯胺为原料经重氮偶合、还原氢解是合成2,5-二氨基甲苯及其系列产品优先的技术路线。同时提出了高质量、低成本、清洁化发展该系列产品的研究方向和内容建议。     

聚磷酸铵的研究进展

聚磷酸铵(APP)是一种重要的无机阻燃剂，是膨胀型阻燃剂的主要成分之一。介绍了Ⅰ-型和Ⅱ-型聚磷酸铵的结构、性质，着重讨论了Ⅰ-型和Ⅱ-型聚磷酸铵的合成方法、改性途径的研究新进展，以及Ⅰ-型聚磷酸铵到Ⅱ-型聚磷酸铵的转化机理、转化方法。研究目的在于制备难溶于水的聚磷酸铵。     

配位离子液体［3（CH3CH2）4N+Cl-·（NH2）2CO］的合成及表征

采用尿素和氯化四乙基铵为原料，合成了一种新型的配位离子液体，并通过红外和X－射线粉末衍射对其结构进行了表征。结果表明，尿素和氯化四乙基铵发生反应，使得原来尿素羰基峰由1690.72cm－1转移到了1619.10cm－1。由X－射线粉末衍射图可以看出，在2θ = 30.37°处有新的衍射峰。通过差热－热重分析，配位离子液体在室温到250℃可以稳定存在，与其他有机溶剂相比具有良好的稳定性。