乙烯裂解炉对流段局部结构设计改进

介绍了乙烯裂解炉对流段的结构功能,各部件局部结构的改善设计。     

聚酯装置熔体过滤器的国产化改造

熔体过滤器为聚酯装置关键设备,其国产化问题一直未能解决。该文通过对天津分公司200kt/a聚酯装置熔体过滤器改造方案的介绍,探讨了其国产化条件,分析了国产熔体过滤器的结构特点,并与进口过滤器进行了对比,提出了一些看法。     

旋转式伽玛刀的辐射剂量学

旋转式伽玛刀的辐射剂量学指标的物理测试在放射性医疗设备投放医院正式临床使用前是必不可少的，是对设备及其附件的设计、加工制造、安装以及电气控制系统等的全面综合性检定。用电离室作辐射剂量学的绝对测量，用胶片法进行相对测量，给出了测量结果并进行了讨论。     

Design and Characterization of the CLIMPAQ,Chamber for Laboratory Investigations of Materials,Pollution and Air Quality*

A test chamber has been developed in order to provide a small and simple emission testing facility capable of testing construction products in a climate where the important climatic parameters such as temperature, ventilation rate and air velocity can be varied independently around typical indoor values. The test chamber CLIMPAQ is made of panes of window glass. Other main surface materials are stainless steel and eloxated aluminium. The chamber has a volume of 50.9 litres and is designed to meet the requirements for quantifying air pollution. In this investigation human subjects acted as air pollution judges, and chemical characterization of the air pollution was carried out. Carpet, linoleum, wall paint and seal- ant were tested simultaneously in the CLIMPAQ and in four other chambers ranging from a full-scale chamber of 28 m³ to a field and laboratory emission cell of 3.5· 10^?5m³. Product ranking is the same in all chambers for the sensory measurements. Emission rates based on sensory measurements differ for all products less than 100 % except for tests in a 3-litre chamber where emission rates were higher. Chemical measurements differ up to approximately 10 times for the same product in different chambers. Deviations appear to be the result of different environmental parameters in the various chambers. Low air concentrations or high specific ventilation rates seem to increase emissions, while differences in air velocities and sink properties may also be the cause of differences in emission rates.     

改造加热炉系统 提高加热炉热效率

分析了重整装置加热炉热效率低的原因，介绍了提高加热炉热效率采取的几项措施。     

葛洲坝电站2号水轮机转轮室中环修复

针对葛洲坝电站2号机组运行中出现转轮室中环损坏的现象,设计制造出转轮室现场机加工的大型专用机床,在修复改造过程中,解决了一系列技术难题,改造后技术指标均达到理想水平,为电站机组现场修复技术积累了宝贵经验.     

电弧炉无渣出钢技术及其在我国的应用

本文介绍了电炉无渣出钢技术在国外的应用与发展现状,结合我国电炉的装备水平,重点讨论了应用虹吸出钢和偏心炉底出钢两种方法的条件、作用和应采取的措施。     

三模式氡测量刻度装置的研制

为满足实验室对一般氡测量仪器的刻度需要,设计了能够实现在脉冲模式、恒定模式和连续模式三种模式下自动控制、自动监测的氡测量刻度装置,并对装置进行了稳定性和可靠性试验。试验结果表明,该装置可为氡及其子体的研究以及其测量仪器的标定提供一个可调节、具有稳定氡浓度的环境。     

Service Reliability Assessment of Weld Repaired CrMoV Steel Rotors

This research deals with the service evaluation of a retired CrMoV steel rotor that has been repaired using deep groove multi‐pass submerged arc welding (SAW) and gas tungsten arc welding (GTAW). Accelerated creep tests were conducted at several elevated temperatures and extrapolated to the service temperatures. The coalescence of carbides and cavity growth during creep were evaluated. For the CrMoV‐GTAW samples, it was found that the creep life depended on the location of the crossweld in the welded specimen. The service lives of the weldments were extrapolated.     

一种识别薄板对接接头的视觉方法

对薄板紧密对接接头的识别问题进行了深入的分析，提出了由照明、自适应局部特征提取、全局特征识别和验证融合在一起的视觉识别方法。它克服了电弧光的干扰，识别结果可靠，可以有效地解决薄板紧密对接接头识别这一难题。