On GID-Testable Two-Dimensional Iterative Arrays

A new approach is presented for easily testable two-dimensional iterative arrays.It is an improvement of GI-testability (Group Identical testability)and is referred to as GID-testability (Group Identical and Different testability).In a GID-testable two-dimensional array,the primary x and y outputs are organized into groups and every group has more than one output.This is similar to the GI-testable arrays.However,GID-testability not only ensures that identical test responses can be obtained from every output in the same group when an array is fault free,but also ensures that at least one output has different test responses (from the other outputs in a group)when a cell in the array is faulty.Therefore,all faults can be detected under the assumption of a single faulty cell model.It is proved that an arbitrary two-dimensional iterative array is GID-testable if seven x-states and seven y-states are added to the original flow table of the basic cell of the array.GID-testability simplifies the response verification of built-in-self-testing in a way similar to PI-and GI-testability^[6-9].Therefore,it is suitable for BIST design.     

Structural study of degraded ZnMgSSe blue light emitters

Using electroluminescence (EL) topography and transmission electron microscopy (TEM), we investigated the nonluminescent regions which form while current is being injected into ZnMgSSe/ZnSSe/ZnCdSe-based blue light emitters. Small dark spots were observed just after turn-on and spread out forming rough nonluminescent triangles in the <100> directions in the EL image of the active region. TEM studies showed that the small dark spots are pre-existing stacking faults originating at the substrate/epitaxial layer interface. The nonluminescent triangles were found to be a dense region of dislocation dipoles and dislocation loops. Each dipole was aligned along two <110> directions in the {111} planes. The Burgers vectors were of the type a/2<011> inclined at 45° to the (001) junction plane.     

Analyzing the Reliability of Degradable Networks

The reachability of a strongly connected network may be destroyed after link damage,Since many networds have directed links with the potential for reversal,the reachability may be restored by reversing the direction of links.In this paper,the reliability of a network that allows reversal of links in discussed.     

一种适合于同杆4回线的故障测距方法

在对同杆4回线解耦的基础上，提出了一种适合于同杆4回线的故障测距方法。同杆4回线内部发生故障时，可以将故障分量分解为12序分量，且利用该12序分量进行故障测距。考虑到在任何故障类型下，同杆4回线内部都会存在反序分量，所以提出了基于反序环流分量的故障测距方法。当同杆4回线内部发生故障时，从线路两端计算到故障点的反序环流分量电压相等，利用该关系可以求出故障点的精确位置。由于相互独立的12序分量完全能够解决线间耦合问题，文中提出的测距算法能够精确测距，测距精度不受故障类型影响。大量ATP仿真结果表明所提出的测距算法完全适用于同杆4回线的故障测距，测距精度不受过渡电阻、系统运行方式、线路两端功角的影响。     

VXIbus模块仪器在电路印制板故障诊断系统中的应用

本文介绍了一个由VXIbus模块仪器组建的用于电路印制板故障诊断的自动测试系统,具体的讨论了组建中的主控计算机和接口控制器的选择及被测单元与自动测试设备之间通用接口设计等问题。在文章的最后,给出了测试软件设计实例。实际应用表明,VXIbus模块仪器的应用,为电路印制板故障诊断系统提供了优良的测试性能,使系统的实用行、通用性、灵活性及自动化程度得到了明显的提高。     

用瞬态频率波动法诊断齿轮故障

利用瞬态频率波动法实现频率调制信号的解调，提取齿轮的局部裂纹信息，并通过黄河ＴＮ２５２型汽车变速器疲劳试验的信号分析来验证。     

全断面双护盾掘进机在引黄工程断层破碎带的卡机处理

万家寨引黄工程国际Ⅱ、Ⅲ标已查明的断层有34条，隐伏断层可能还有一些，除了利民堡区域性大断层（F32）外，较大的集中于7#洞北段59＋700—68＋820，主要有F65、F70、F90、F74。全断面双护盾掘进机适应于较复杂的地质条件，因此在通过断层破碎带时一般都较正常。但在通过引黄工程区域性大断层F65时，发生了卡机事故，处理用了3个月时间。该文对处理TBM卡机事故的施工进行了总结。     

浅议轨道交通直流牵引供电系统的构成及保护配置

介绍了城市轨道交通直流牵引供电系统的构成,详细叙述了直流牵引供电系统的主要电气设备及其连接方法,以及系统的运行方式.另外,还简单介绍了系统配置的直流保护以及保护原理和保护作用.     

Developing real-time knowledge-based systems with PERFECT

PERFECT (Programming EnviRonment For Expert systems Constrained in reasoning Time) is aimed at providing the necessary engineering support in real-time knowledge-based system development. PERFECT bridges the gap between the traditional analysis and design methodologies, and the implementation tools for these systems. It does so by providing the means to construct a knowledge model and to choose a suitable inference strategy. Subsequently the properties of the knowledge model and inference strategy may be analysed. For instance, it may be checked whether the knowledge model contains sufficient knowledge to diagnose a fault in an industrial process. Moreover, it may be checked whether the inference engine is able to provide an answer to a certain problem in time. If not, the analyser of PERFECT proposes an alternative structure of the knowledge model. When the constructed knowledge model and the chosen inference strategy show the required time efficiency, the compiler of PERFECT may translate them to an actual real-time knowledge based system in COGSYS. In addition, guidelines are provided with respect to the design of the human-machine interface. The resulting system is an instrument—a source of information that can be used by the human operator during problem-solving, rather than a prosthesis—a device that solves the entire problem by itself and presents the outcome to the human operator.     

神经网络在电路诊断中的应用

目的：阐述了目前电路基于数据库技术和人工智能专家系统及神经网络原理的故障诊断系统。方法：将所记录的模糊症状输入到系统中，通过模糊运算后，运用神经网络学习算法来寻找故障类型。结果：介绍了人工神经网络技术在电路诊断中的应用，并给出系统故障诊断软件的设计，结论：所用专家系统和神经网络相结合的方法改进电子电路故障诊断是可行的。