孟加拉HATHAZARI 132kV电缆回流线取舍探讨

针对孟加拉Hathazari 100MW重油发电机组EPC工程132kV电缆现场实际设计、采购和敷设情况,通过理论计算探讨回流线取舍问题。     

绥高#2线线路保护2动作分析

对高岭站2009年6月15日绥高#2线线路保护动作的原因进行深入分析,介绍处理措施。     

基于RTLinux和AD2S80A的角位置测量系统设计与实现

基于RTlinux和AD2S80A的角位置测量系统,选用旋转变压器和感应同步器作为测量系统的传感器,利用AD2S80A轴角变换器将两种测量传感器输出的模拟信号转换为相应的数字信号。根据双通道测角系统粗精耦合的原理,在RTLinux嵌入式系统中对两种数字信号进行耦合处理,并对耦合后信号的进行补偿处理,实现角位置的高精度测量。检测数据表明,这种测量系统可以实现以内的测量精度。     

折线链节点标注技术

针对传统多边形位置关系计算比较烦琐,以及简单多边形的理论难以拓展到一般多边形的问题,提出标注节点状态的方法.通过定义11种位置来描述折线链上每个节点的状态,再采用"线段端点与线段"和"线段端点与邻折线"的标注方法来实现任意折线链的标注,同时利用两线段分割预处理使相交仅发生在端点处,从而使算法更高效;然后给出折线链基本位置关系的节点特征,并且探讨了三维顶点的标注方法.该方法的标注原理简单、方法实用,算法空间和时间复杂度分别为O(n)和O(n2).实验结果表明,该方法对任意形状的折线链都能实现稳定标注;通过搜索节点状态特征可以求解折线链间的相互关系,还可以实现一般折线链的碰撞检测、相交区域计算以及多边形简单化分解等.     

行为优化提升软件配置管理

软件配置管理包括对代码、文档、数据等的管理,其优劣受限于项目成员的实际操作。开发人员对于工作区如何使用;成员之间的代码是不是可以及时更新与同步;怎样使用分支,如何进行变更合并,才能减少物理空间浪费和事件延迟。这些问题在实际的项目开发中往往被忽视,亦或团队并没有对成员行为作细节的规范,因而许多软件项目出现了工期推迟或代码质量不高等问题。为此提出了一系列管理措施,通过优化软件配置管理规范项目各成员的行为,以保证高效的软件配置管理的实施。     

Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

煤矿井下高压降尘供水系统监控装置的研制

根据煤矿井下高压降尘系统对供水的要求,研制了一种基于PIC18F4580单片机的井下高压降尘供水系统监控装置,介绍了该装置的硬件和软件设计。该装置可实时监测水箱水位、压力、运行状态,并可将这些保护状态信息通过CAN总线接口和转换单元并入煤矿监测监控网,实现远程监测。实验结果表明,该监控装置达到了设计要求,能保证高压降尘供水系统的实时监测与安全运行。     

矿用区域温度监测系统研制

针对现有的火灾探测器仅能对已发生的火灾进行探测,而在火灾发生前、环境温度较低时,却无法发出报警信号的问题,设计了一种可应用于非煤矿山的基于测温电缆的区域温度监测系统。该系统采用线状温度传感器连续监测探测区域的最高温度,在火灾未发生时即可发出预警信号,从而避免事故发生或引起火灾。试验结果验证了该系统的可行性。     

Simultaneous solving of balancing and sequencing problems with station-dependent assembly times for mixed-model assembly lines

In spite of many studies, investigating balancing and sequencing problems in Mixed-Model Assembly Line (MMAL) individually, this paper solves them simultaneously aiming to minimize total utility work. A new Mixed-Integer Linear Programming (MILP) model is developed to provide the exact solution of the problem with station-dependent assembly times. Because of NP-hardness, a Simulated Annealing (SA) is applied and compared to the Co-evolutionary Genetic Algorithm (Co-GA) from the literature. To strengthen the search process, two main hypotheses, namely simultaneous search and feasible search, are developed contrasting Co-GA. Various parameters of SA are reviewed to calibrate the algorithm by means of Taguchi design of experiments. Numerical results statistically show the efficiency and effectiveness of the proposed SA in terms of both the quality of solution and the time of achieving the best solution. Finally, the contribution of each hypothesis in this superiority is analyzed.     

Transport properties of critical dilute solutions

On the basis of the isomorphism of critical phenomena, the behavior of transport properties of binary mixtures in the vicinity of the vapor-liquid critical line is considered. In particular, the renormalization of the singularity of the thermal conductivity in dilute critical solutions has been analyzed in detail. It is shown that the behavior of the thermal conductivity is determined by the critical background, i.e., the fluctuation-induced regular part, which diverges at the critical point of a solvent.