Whole-body vibration exposure in sport: four relevant cases

This study investigates the whole-body vibration exposure in kite surfing, alpine skiing, snowboarding and cycling. The vibration exposure was experimentally evaluated following the ISO 2631 guidelines. Results evidenced that the most critical axis is the vertical one. The weighted vibration levels are always larger than 2.5 m/s² and the vibration dose values are larger than 25 m/s^1.75. The exposure limit values of the EU directive are reached after 8–37 min depending on the sport. The vibration magnitude is influenced by the athletes’ speed, by their skill level and sometimes by the equipment. The large vibration values suggest that the practice of sport activities may be a confounding factor in the aetiology of vibration-related diseases.     

Fuzzy-neural approaches with example post-classification for estimating job cycle time in a wafer fab

Estimating the cycle time of a job in a wafer fabrication plant (wafer fab) is a critical task to the wafer fab. Many recent studies have shown that pre-classifying a job before estimating the cycle time was beneficial to the forecasting accuracy. However, most pre-classification approaches applied in this field could not absolutely classify jobs. Besides, whether the pre-classification approach combined with the subsequent forecasting approach was suitable for the data was questionable. For tackling these problems, two hybrid approaches with example post-classification, the equally-divided method and the proportional-to-error method, are proposed in this study in which a job is post-classified by a back propagation network (BPN) instead after the forecasting error is generated. In this novel way, only jobs whose cycle time forecasts are the same accurate will be clustered into the same category, and the classification algorithm becomes tailored to the forecasting approach. For evaluating the effectiveness of the proposed methodology and to make comparison with some existing approaches, production simulation (PS) is applied in this study to generate test data. According to experimental results, the forecasting accuracy (measured with root mean squared error, RMSE) of the proportional-to-error method was significantly better than those of the other approaches in most cases by achieving a 26–56% (and an average of 41%) reduction in RMSE over the comparison basis – multiple-factor linear combination (MFLC). The effect of post-classification was also statistically significant.     

混合遗传蚁群算法优化BP神经网络预测空气质量

为了进一步提高空气质量指数预测精度,提出一种混合遗传蚁群算法优化BP神经网络的方式对空气质量指数进行预测.首先初始化蚁群算法的信息素分布,对不满足适应度条件的进行遗传算法的交叉、变异操作,进而计算蚁群的状态转移概率和信息素浓度,当适应度值满足条件要求时,将寻优结果作为BP神经网络的最优权值和阈值,来改善单一BP神经网络的不足.最后通过运用西安市的空气质量指数日历史数据进行验证,实验表明,本文所提模型的各个评价指标相对其他对比模型误差更小,在预测精度方面具有更高的说服力,因此能够有效地预测空气质量指数.     

BP神经网络结合变量选择方法在牛奶蛋白质含量检测中的应用北大核心CSCD

牛奶中的蛋白质含量会影响牛奶的品质,利用高光谱图像的光谱特征信息研究对牛奶蛋白质含量预测的可行性。本文提出一种基于竞争性自适应重加权算法(competitive adaptive reweighted sampling, CARS)和连续投影算法(successive projections algorithm, SPA)结合多层前馈神经网络(back propagation, BP)的预测建模方法,实验以含有不同浓度蛋白质的牛奶为对象,利用可见光/近红外高光谱成像系统共采集到5种牛奶共计250组高光谱数据,通过实验对比选择采用标准化方法对获取到的吸收光谱预处理,然后采用CARS结合SPA筛选特征波长,得到18个特征波长,建立CARS-SPA-BP模型,经过试验,CARS-SPA-BP模型的训练集决定系数和测试集决定系数R;和R;分别达到0.971和0.968,训练集均方根误差(root mean square error of calibration,RMSEC)和测试集均方根误差(root mean square error of prediction,RMSEP)达到了0.033和0.034。研究发现,采用CARS结合SPA筛选的牛奶特征波长建立的多层前馈神经网络模型,其模型预测结果与全波长建模相比并没有明显降低,因此将CARS结合SPA用于波长筛选并且结合BP神经网络基本可以完成对牛奶蛋白质含量的预测。为验证CARS-SPA-BP模型的预测能力,在相同数据环境下,使用较为传统的偏最小二乘回归(partial least squares regression, PLSR)进行建模,实验结果表明,CARS-SPA-BP相较于PLSR,R;和RMSEP均有明显提升。研究表明,CARS-SPA-BP可充分利用牛奶光谱特征信息实现较高精度的牛奶蛋白质含量检测。     

典型工业粉尘地区复合绝缘子污秽成分及其闪络特性

近年来,盐城德隆镍业厂区附近数次发生输电线路外绝缘放电、污闪现象,且采用复合绝缘子后仍不能得到有效抑制,而临近的化工区却没无该情况发生。因此,本文对盐城电网辖区内镍厂、化工厂绝缘子进行污秽取样,开展了污秽化学成分分析测试,包括阴阳离子含量、不溶物元素组成、主要化合物成分等;继而基于成分分析结果,开展了混合污秽下的污闪特性试验,得到了不同污染源典型污秽成分下复合绝缘子的闪络特性。研究结果表明：化工厂和镍厂附近绝缘子污秽成分有一定的差异,体现在镍厂污秽成分含硝酸盐较多,而化工厂附近含氯盐较多;对于一大两小型复合绝缘子,其在镍厂典型污秽下的闪络梯度要比化工厂低5%-10%;对于重工业粉尘地区的外绝缘配置,建议采用一大一小型绝缘子来提高电气强度。     

n型单晶硅片的电阻率和扩散方阻对IBC太阳电池电性能的影响

叉指背接触式(IBC)太阳电池因正面没有金属栅线遮挡,具有较高的短路电流,且组件外观更加美观。但由于IBC太阳电池正负电极在背面交叉式分布,在制备过程中需要采用光刻掩模技术进行隔离,难以实现大规模生产。采用Quokka软件仿真模拟了电阻率和扩散方阻对n型IBC太阳电池效率的影响,并对不同电阻率和扩散方阻的电池片进行了实验验证,从n型单晶硅片电阻率的选择和扩散工艺优化方面为IBC太阳电池的规模化生产提供了理论基础。实验结果表明,电阻率为3~5Ω·cm、扩散方阻为70Ω/时,小批量生产的IBC太阳电池平均光电转换效率可达23.73%,开路电压为693 mV,短路电流密度为42.44 mA/cm²,填充因子为80.69%。     

特殊构造砖烟囱定向爆破拆除

介绍了定向控制爆破技术拆除一座烟囱、水塔的结合体,拟爆结构物地坪以上27 m处设置钢筋混凝土结构水箱,致使重心高于一般烟囱,其外壁采用ф12 mm钢筋网箍和60 mm厚混凝土进行加固。周边环境复杂,距高压配电房仅1.4 m,为避免地坪处+0.5 m烟道口对定向的影响,将爆破切口位置提高到+3.0 m处;为减小触地振动、防止倾倒过程中出现后座,采用梯形切口,爆破切口长度取其周长62%,爆破切口高度取1.4 m。为克服烟囱外壁加固层和圆拱墙体钻凿深度不准确的影响,同排相邻炮孔采用一深、一浅的布置方式,其炮眼深度差值2~3 cm,装药结构应用正、反向起爆综合技术。采用开挖减震沟、设置缓冲带控制爆破振动等措施,爆破效果理想,保证了邻近建筑物及设施安全。     

Automatic text classification using BPLion-neural network and semantic word processing

Text mining has become a major research topic in which text classification is the important task for finding the relevant information from the new document. Accordingly, this paper presents a semantic word processing technique for text categorization that utilizes semantic keywords, instead of using independent features of the keywords in the documents. Hence, the dimensionality of the search space can be reduced. Here, the Back Propagation Lion algorithm (BP Lion algorithm) is also proposed to overcome the problem in updating the neuron weight. The proposed text classification methodology is experimented over two data sets, namely, 20 Newsgroup and Reuter. The performance of the proposed BPLion is analysed, in terms of sensitivity, specificity, and accuracy, and compared with the performance of the existing works. The result shows that the proposed BPLion algorithm and semantic processing methodology classifies the documents with less training time and more classification accuracy of 90.9%.     

车辆四轮转向系统的控制方法

系统地评述了车辆四轮转向系统的原理及其控制方法的发展,在此基础上指出四轮转向系统的研究必须以闭环综合评价为出发点,并与其它主动安全技术相结合才能真正达到实用阶段。     

Static and dynamic postural loadings during computer work in females: Sitting on an office chair versus sitting on an exercise ball

Seated computer work results in prolonged static loading, which has been associated with the development of musculoskeletal disorders. A popular alternative to sitting on an office chair while performing computer work is to sit on an exercise ball. Sitting on an exercise ball might affect static and dynamic aspects of working posture. We monitored posture, muscle activation and spinal shrinkage in 10 females performing a 1-h typing task, while sitting on an office chair with armrests and while sitting on an exercise ball. Sitting on an exercise ball resulted in 33% more trunk motion and in 66% more variation in lumbar EMG. Both of these findings can be considered to be an advantage for the exercise ball. However, the fifth percentile and average lumbar EMG were also higher when sitting on an exercise ball, with 38% and 78%, respectively. In addition, more spinal shrinkage occurred when sitting on an exercise ball than when sitting on an office chair. Arm flexion was reduced, but trapezius activation was unaffected when sitting on an exercise ball. It is concluded that the advantages with respect to physical loading of sitting on an exercise ball may not outweigh the disadvantages.