CFRP加固钢筋混凝土梁滞后应变计算方法

为了系统研究从零负载状态到满负载状态各个阶段CFRP片材加固梁滞后应变的计算方法,在充分考虑加固梁不同负载状态及受压区混凝土非线性本构关系的基础上,分别建立了不同负载贴片加固梁考虑混凝土抗拉作用时的滞后应变计算公式及不考虑混凝土抗拉作用时的简化计算公式.试验数据和对比分析结果表明:"考虑混凝土抗拉作用"公式的计算结果与试验数据吻合良好,计算误差<8%,明显优于现有文献的计算方法;"不考虑受拉区混凝土抗拉作用"公式的计算结果在混凝土开裂前和试验值相差较大,但对已裂加固梁的计算误差与"考虑混凝土抗拉作用"公式的计算误差接近.为简化计算,对未裂和已裂混凝土梁贴片加固时的滞后应变可分别采用"换算截面"公式和"不考虑混凝土抗拉作用"公式进行计算,两种简化方法的误差均不会超过10%.     

Surface performance of workpieces processed by electrical discharge machining in gas

The surface performance of workpieces processed by electrical discharge machining in gas(dry EDM)was studied in this paper.Firstly,the composition,micro hardness and recast layer of electrical discharge machined(EDMed)surface of 45 carbon steels in air were investigated through different test analysis methods.The results show that the workpiece surface EDMed in air contains a certain quantity of oxide,and oxidation occurs on the workpiece surface.Compared with the surface of workpieces processed in kerosene,fewer cracks exist on the dry EDMed workpiece surface,and the surface recast layer is thinner than that obtained by conventional EDM.The micro hardness of workpieces machined by dry EDM method is lower than that machined in kerosene,and higher than that of the matrix.In addition,experiments were conducted on the surface wear resistance of workpieces processed in air and kerosene using copper electrode and titanium alloy electrode.The results indicate that the surface wear resistance of workpieces processed in air can be improved,and it is related with tool material and dielectric.     

Electroless nickel plating on the surface of carbon fibers

The electroless nickel plating on the surface of carbon fibers was prepared by pretreating the carbon fibers in order to increase their conductivity,and consequently enhance the EMI shielding effectiveness of the composites.The relationship between the performance of depositing coat and pH value,temperature,reaction time and the way of agitation was studied.Results show that the depositing quality is stable under pH between 4.5 and 5.0,temperature between 75 ℃ and 85 ℃,reaction time for 10 min and air agitation.The uniform and compact nickel layer deposited on carbon fibers was proved by XRD and SEM,and the electrical resistivity of carbon fibers with nickel coating was tested.Results indicate that the electrical resistivity of carbon fibers with electroless nickel plating is decreased by an order of magnitude compared with that of carbon fibers.It means that nickel coating can greatly improve the electromagnetic interference shielding properties of carbon fibers.     

Relationship of hydrocarbon and source-rock in Nos.3-5 tectonic belts of the Lenghu area, northern Qaidam Basin

Based on analyses of the components of crude oil hydrocarbons and carbon isotopes, the content of normal alkane de-creased from 49.00% to 20.10% when moving from the No.3 to No.5 tectonic belt of the Lenghu area of the Qaidam Basin, while cycloalkanes increased from 30.00% to 52.20% and aromatic and branch chain alkanes increased gradually as well. The maturity of sterane in crude oil is higher than that of its source-rock, which shows that the hydrocarbons were generated from a deep source-rock of high maturity around the tectonic belts of the Lenghu area. The analysis of the characteristics of carbon isotopes also shows that these isotopes of hydrocarbon compounds in the No.4 and No.5 tectonic belt are apparently heavier than those in the No.3 belt. The results of our research show that the hydrocarbons in the No.3 tectonic belt are mainly from a relatively rich sapropelic substance, while the hydrocarbons in the No.4 and No.5 tectonic belt originated mainly from organic matter of a rela-tively rich humic type substance.     

外商直接投资类型转变的实证分析

论文在文献评述的基础上利用1992—2008年日本、美国等10个主要经济体对华直接投资数据,实证检验了外商直接投资(FDI)类型与中国市场规模、要素成本、投资环境之间的关系。结果表明:FDI在中国既具有垂直型FDI的特征,同时又具有水平型FDI的特征,但水平型特征更为突出。随着中国经济的迅速发展和市场规模的扩大,进入中国的FDI正由垂直型向水平型转变。在实证分析的基础上,针对当前的FDI类型转变提出了相关政策建议。     

交通运输业节能减排国际管理手段及启示

交通运输业的能源消费在许多国家中都占有较高比例,经济发展较快的国家更是如此。介绍了能源消费大国英国、美国、欧盟以及日本交通运输业节能减排采取的主要管理手段,包括健全的法律体系、节能技术创新、有效的税费政策等。借鉴其先进经验,为我国交通运输业节能减排管理工作提供启示。     

企业节能减排的监控系统研究

经济发展与节能减排是一个矛盾的统一体,如何在二者之间进行平衡,考验着中国人的智慧。通过行业分类选取恰当的节能减排指标、采用统计学的基本原理、应用质量控制的技术与方法,提出了节能减排的指标体系和监控方法,以期对节能减排实施动态监控,对我国现阶段的企业节能减排工作有着重要的参考价值。     

二氧化硅负载支链有机膦的合成及其在二氧化碳催化氢化反应中的催化性能

以改性二氧化硅为核,利用发散法合成出二氧化硅负载的1～6代端胺基树枝状高分子(SiO2-PAMAM),样品经FT-IR,TG和端胺基分析表征.利用功能化载体表面的氨基与[Ph2P(CH2OH)2]+Cl-发生反应,合成出SiO2-PAMAM负载的有机膦(SiO2-PAMAM-PPh2),与三氯化钌复配成催化体系,考察了其对吗啉存在下的二氧化碳催化氢化反应的催化性能,该催化体系的催化活性(TOF)可达4 195.     

混合炭黑TST-103在轮胎内层帘布胶中的应用

研究了混合炭黑TST-103在轮胎内层帘布胶中的应用。小配合和车间大料及成品轮胎试验表明，使用8份混合炭黑TST-103，内层帘布胶的工艺性能、物理性能及实际使用性能均与原内层帘布胶相近，而每千克胶料成本降低了0．33元。     

A/O法废水处理碱源的研究与实践

从理论到实践阐述了以具有价格优势的 Na OH替代 Na2 CO3做碱源 ,解决 A / O法运行成本高的问题。