基于模糊决策的风力发电产业评价研究

根据风力发电技术产业的特点,构建改进层次分析与模糊一致矩阵相结合的方案决策数学模型,该模型既可以减少确定判断矩阵的盲目性,又可以避开评价体系中各等级间的隶属度确定问题,使评价结果更加可靠,适合于信息尚不完整、受主观因素影响较强的评价。实例验证了这一模型的合理性、可行性和有效性,具有实用价值。     

Joint relay selection and power allocation for amplify-and-forward two-path relaying networks

This paper presents a joint relay selection and power allocation scheme for amplify-and-forward two-path relaying networks,in which diferent relay nodes forward information symbols alternatively in adjacent time slots.Our approach is based on the maximization of the received signal-to-noise ratio under total power consumption by the transmission of the symbol.We show that in spite of inter-relay interferences,the maximization problem has a closed-form solution.Simulation results explicitly indicate that the performance of proposed approach outmatches the existing methods including equal power allocation and one-path relaying.     

探索新体系 形成新特色──编写《电力系统分析》教材的体会和作法

本文介绍了作者在总结教学改革和课程建设成果的基础上编写《电力系统分析》教材的体会和作法。指导思想是‘探索新体系,形成新特色”。针对课程本身的任务和学科的系统性,将全书分为三篇：电力系统的基础知识;电力系统的基本计算和电力系统的运行分析。特色为：注重学生能力的培养;少而精;适时反映学科的发展与进步。配套：思考题、习题及计算机辅助教学软件包（ＣＡＩ）。     

Economic modeling of board test strategies

A long and deep recession, coupled with continuous competitive pressure to reduce costs, is forcing many companies to review their test strategies. Testing costs have become a more significant proportion of the overall manufacturing cost even though manufacturing yields have increased dramatically over the past ten or twelve years. This causes attention to be focused on testing costs as a key source of cost reduction. The increased use of DFT and the integration of design and test are very positive moves towards controlling testing costs but other methods employed can often backfire. The increased use of low priced testers is one such method. The pressure to reduce costs, higher process yields and exhortations that testing adds no value can lead the test engineering manager to take the cheap route. In reality this can often turn out to be an expensive decision. The only way to avoid expensive mistakes is to perform an economic analysis of the alternative courses of action. In most cases this is done, but not always in the right manner or with the necessary amount of detail to make the comparisons meaningful. This article discusses the need for effective cost analysis of test strategies and highlights some of the pitfalls.     

增材制造技术在电机中的应用综述

增材制造技术(即3D打印)因具有高设计自由度、高材料利用率、高成形效率和精度等优势,逐渐成为高效轻质高功率密度电机设计与制造的研究热点。该文旨在对3D打印电机的性能及其应用作系统性综述。首先,对3D打印电机的发展脉络进行简要概括。其次,分别对3D打印铁心、磁钢、绕组,以及散热和机械支撑结构的研究现状进行总结,并与传统工艺加工的样件进行性能对比。随后,介绍了适用于增材制造的结构设计方法——拓扑优化。最后,根据目前的研究情况归纳了3D打印电机未来的发展趋势和面临的挑战。     

Institutional competition protects consumers: Public power vs. private power

The historical competition between public power and private power shows that retail customers have chosen the former to reduce costs and improve customer service. Research also shows that publicly owned utilities employ cost-minimizing algorithms, and that federal and state regulators favor the interests of investors over those of customers, undermining their obligation to protect consumer welfare. Institutional options matter and should be strongly encouraged.     

Design of a 2-DOF-PID controller using an improved sine–cosine algorithm for load frequency control of a three-area system with nonlinearities

This paper proposes an improved sine–cosine algorithm (ISCA) based 2-DOF-PID controller for load frequency control. A three-area test system is built for study, while some physical constraints (nonlinearities) are considered for the investigation of a realistic power system. The proposed method is used as the parameter optimizer of the LFC controller in different scenarios. The 2-DOF-PID controllers are used because of their capability of fast disturbance rejection without significant increase of overshoot in set-point tracking. The 2-DOF-PID controllers’ efficacy is observed by examining the responses with the outcomes obtained with PID and FOPID controllers. The simulation results with the suggested scheme are correlated with some of the existing algorithms, such as SCA, SSA, ALO, and PSO in three different scenarios, i.e., a disturbance in two areas, in three areas, and in the presence of physical constraints. In addition, the study is extended to a four-area power system. Statistical analysis is performed using the Wilcoxon Sign Rank Test (WSRT) on 20 independent runs. This confirms the supremacy of the proposed method.     

电力有源滤波器控制器的研究与仿真分析

建立了包括有源电力滤波器（ＡＰＦ）在内的公共连接点（ＰＣＣ）的数学模型;针对实际控制器计算过程中的时间延迟,提出对负载电流值进行预测的两种算法,对逆变器的开关元件提出一种新型脉宽调制（ＰＷＭ）控制方案,并采用电力电子仿真软件包进行了仿真验证。     

浅析40T支架搬运车液压系统油温变化对其效率的影响

介绍了油温变化对40T支架搬运车液压系统油液黏度、液压介质和橡胶类密封件的影响,分析了液压系统的总发热功率、总散热功率,结合动态热平衡的计算,找出了液压系统总效率与油温变化之间的关系,并给出其函数关系式。根据这种关系,通过一种工况的油温实测数据取样,计算出相应的效率值,定量地验证了液压系统油温变化引起效率变化的关系,得出了总效率随着温度变化而变化的结论,即温差增大时,总效率降低;温差减小时,总效率增大。通过该结论可以全面掌握系统的工作状态,通过降低油温有效提高效率。     

High power devices in wide bandgap semiconductors

Silicon carbide (SiC) semiconductor devices for high power applications are now commercially available as discrete devices. Recently Schottky diodes are offered by both USA and Europe based companies. Active switching devices such as bipolar junction transistors (BJTs), field effect transistors (JFETs and MOSFETs) are now reaching the market. The interest is rapidly growing for these devices in high power and high temperature applications. The main advantages of wide bandgap semiconductors are their very hi...