气化炉复合炉衬的传热计算

新型 (多喷嘴对置 )水煤浆气化炉拟采用水冷管和耐火浇铸料组成的复合炉衬结构 .炉内的高温高压对复合炉衬的高温侵蚀十分严重 ,是影响其寿命的重要因素 ,因此合理设计气化炉复合炉衬的结构对充分发挥其材质的作用具有十分重要的意义 .建立了气化炉复合炉衬的传热计算的数学模型 ,同时编制了模型求解的计算程序 ,并用某工艺条件对复合炉衬的温度分布进行了计算 .结果表明 ,该方法可有效计算出复合炉衬的温度分布情况 ,为复合炉衬的设计、运行和维护提供理论依据     

Characterization of microporous-mesoporous MCM-41 silicates prepared in the presence of octyltrimethylammonium bromide

MCM-41 silicates prepared in the presence of octyltrimethylammonium bromide either by a conventional method or by post-synthesis hydrothermal treatment were characterized by nitrogen adsorption in a wide range of relative pressure from 10^-6 to 1. Hydrothermally restructured samples were found to have lower BET surface areas, lower external surface areas and thicker silica walls than the non-treated sample. More importantly, in addition to their characteristic mesopores (ca. 3 nm), they were shown to have considerable amounts of micropores. The relative amount of micropores and mesopores was shown to be dependent on the treatment conditions. Thus, it is demonstrated that the postsynthesis hydrothermal restructuring is a convenient synthesis route to MCM-41 silicates with bimodal pore size distribution involving controllable amounts of microporosity. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of mesoporous SBA-15 for nanostructuring titania for photocatalytic applications

SBA15–TiO₂ samples prepared by introducing titanium with a grafting method and having TiO₂ loadings below 15 wt.% have been characterized by XRF, XRD, IR, porosimetry, SEM, HRTEM, and UV–Visible diffuse reflectance. Differently from the samples reported in the literature characterized by a high TiO₂ loading, no evidences have been found for the presence of titania particles inside or outside the mesopores of SBA-15. Three different titanium species were instead evidenced to be present. The first two derive from the reaction of titanium with silanol groups in the corona area of inner SBA-15 walls leading to the formation of either TiO₄ tetrahedral sites (by reaction by hydroxyl nests of surface defect sites) and/or pseudo-octahedral surface sites anchored by two (or more) Si or Ti ions through bridging oxygens. The third species derives from the reaction of titanium in the regions with high sylanol density, e.g. in the micropores located in the corona of SBA-15 channels, leading to the formation of TiO₂-like nanoareas (probably Si-doped) with dimensions of around 1–2 nm maximum. The potential interest of these materials as photocatalysts, for the presence of a TiO₂-like nanoareas highly accessible by reactants, is discussed.     

半刚性钢-混凝土组合节点受弯承载力的计算

在半刚性钢 -混凝土组合框架中 ,混凝土板中的纵向钢筋增加了节点的强度和刚度 ,但是 ,传统的设计方法往往忽略纵向钢筋的作用而采用简化的计算模型。因此 ,出于经济效益考虑 ,应该根据半刚性组合节点的实际受力性能建立更加准确的计算方法。这里详细介绍了考虑混凝土板纵向钢筋作用的半刚性组合节点受弯承载力的计算方法 ,计算结果表明 ,建议的公式与试验结果吻合良好 ,可供规范制定和工程应用参考。     

A polyamide-silica composite prepared by the sol-gel process

Summary A new kind of organic-inorganic hybrid composite was prepared by means of the sol-gel process. The polymer employed was a mixed-isomer aromatic polyamide having good solubility and thermal stability. The silica constituting the inorganic phase was produced by the hydrolysis and condensation of tetramethoxysilane. The bonding between the phases involved aminophenyl-trimethoxysilane, in which the amino group can react with the phthaloyl chloride end-capped polymer, and the methoxysilane groups undergo hydrolysis. The composition of these composites was varied by changing the linear polymer chain length and relative amount of tetramethoxysilane. The gelation time was found to range from a few minutes to several days. Thermogravimetric analyses showed that decomposition starts at approximately 450 °C. Thin films cast from materials having a relatively high silica content were opaque and rigid, but those with low silica content were flexible and transparent.     

聚乙烯/石墨阻燃复合材料的研究

研究了石墨、可膨胀石墨、膨胀石墨 /聚乙烯复合材料的阻燃性能。结果表明 ,石墨具有一定的阻燃作用 ,可膨胀石墨具有良好的阻燃效果。但可膨胀石墨填充的复合材料力学性能较差     

熔融石英耐火材料

阐述了熔融石英耐火材料的主要性能与应用领域。