A variational method for contour tracking via covariance matching

This paper presents a novel formulation for contour tracking.We model the second-order statistics of image regions and perform covariance matching under the variational level set framework.Specifically,covariance matrix is adopted as a visual object representation for partial differential equation(PDE) based contour tracking.Log-Euclidean calculus is used as a covariance distance metric instead of Euclidean distance which is unsuitable for measuring the similarities between covariance matrices,because the matrices typically lie on a non-Euclidean manifold.A novel image energy functional is formulated by minimizing the distance metric between the candidate object region and a given template,and maximizing the one between the background region and the template.The corresponding gradient flow is then derived according to a variational approach,enabling partial differential equations(PDEs) based contour tracking.Experiments on several challenging sequences prove the validity of the proposed method.     

P2P网络中的超级节点选取算法研究

P2P系统在构建覆盖网络时未考虑到与物理网络的结合,导致逻辑拓扑结构与物理拓扑结构严重不匹配问题,增加P2P相邻节点间的延迟。本文提出一种基于区域划分的超级节点选取机制,将P2P网络中的节点按照物理位置划分成若干区域,保证区域内节点在物理位置上是相近的。利用MATLAB进行仿真实验,仿真实验表明使用这种机制能降低半分布式P2P网络的信息检索延迟,有效地提高检索的效率,并且具有较好的可扩展性。     

基于中值滤波和梯度锐化的边缘检测

实现一种基于中值滤波和梯度锐化的边缘检测方法。首先采用既能过滤噪声又能保护边缘信息的中值滤波对图像进行平滑处理。然后采用梯度锐化加强边缘像素强度,通过简单的二值化获得图像的初始边缘,系统采用连通区域标记的方法去除位于图像封闭边界内的残留黑块。最后通过实验结果与人工提取的结果比较,进行误差分析,找出本文算法的不足之处,以便对该算法进行改进。实践证明,本文的边缘检测方法对含有噪声点且灰度分布比较均匀的图像有很好的效果。     

降膜蒸发过程的数值模拟和传热传质分析

利用CFD软件对逆流降膜蒸发过程进行了实验模拟研究,研究了速度边界层、热边界层和浓度边界层的变化对降膜蒸发传热传质特性的影响规律;通过建立一维逆流降膜蒸发的数学方程编程求解出了对流传热传质的Nu数和Sh数,利用Fluent软件模拟出的实验结果采用回归分析得出了气液流量比Raw、流道的长宽比αL、空气进口无量纲温度θai以及空气进口Re数与Nu数、Sh数之间的无量纲关系式,可为降膜蒸发换热器的设计提供参考。     

GRAIN SHAPE EFFECT IN SUPERPLASTIC DEFORMATION

The method controlling grain shape in TMT processing and the effect of grain shape on char-acteristic parameters in superplastic deformation were discussed.The accommodation velocityof grahl boundary sliding,which is the dominant mechanism in superplastic deformation,andthe contribution of each mechanism to the total strain,as influenced by grain shape,were ana-lyzed.Grain shape has been shown to be an essential structural factor for superplasticity.Thenan analysis was made about the effect of grain shape on the region transition strain rate sothat a new concept,critical aspect for superplasticity,was worked out.These predictions werecompared with the measured results in an Al-Zn-Mg alloy.     

IGBT串联均压方法综述

绝缘栅双极性晶体管IGBT(insulated gate bipolar transistor)在高电压场合应用时需串联使用满足电压需求。由于器件内部的性能差异和外围电路参数不一致等,引起IGBT模块之间电压不均衡问题,威胁其运行安全。综述了国内外IGBT串联均压方法的发展及其研究现状。根据均压方法机理的不同,将IGBT串联均压方法分为被动均压方法和主动均压方法两种,进一步将主动均压方法归纳为无源控制方法和有源控制方法两类。根据各类方法的基本电路拓扑分析了均压原理,梳理了不同方法在电路拓扑、参数选择和控制策略等方面的优化和最新进展。通过均压效果、附加损耗和可靠性等多方面对不同均压方法进行对比,被动均压方法拓扑简单不需外加控制电路更适合在低频应用场合,在高频应用场合中,准有源栅极控制法以单驱动与无源器件相结合的方式,具有良好的发展前景。最后对IGBT串联均压方法进行了展望。     

填隙Ti2Ni相形成条件的模式识别分析

在多维键参数空间中对填隙Ti_2Ni相化合物的形成条件做模式识别分析,由于前过渡金属原子组成的八面体空穴中填入C,N.O原子使Ti_2Ni结构稳定化,此结构的分布区扩大,邻近的Al_2Cu,MoSi_2结构分布区减小。     

关于贝氏体形核和台阶机制的讨论--与徐祖耀院士等商榷

一些合金固溶化(或淬水)后在预贝氏体(孕育)期内等温淬火(或时效)，既保持高温时形成的晶体缺陷，又产生新的晶体缺陷。母相中由于溶质原子扩散而在缺陷处发生偏聚，则形成贫／富溶质微区，即类拐点(spinoclal—like)分解。当贫溶质微区成分作为Ms，其温度等于或高于等温淬火(或时效)温度时，贝氏体将以马氏体样切变形核，故贝氏体是在溶质原子扩散控制下切变形核。在TEM温台试验中未发现台阶生长机制，界面上巨型台阶是贝氏体增宽(厚)速度差异所致。     

含水量对渠道保温板保温耐久性的影响及保温板厚度设计

北方渠道大多使用保温板防止混凝土衬砌受冻胀破坏。在计算保温板厚度时为了降低成本,容易忽略保温板使用过程中受各种因素的影响导致保温效果变差的情况,使混凝土衬砌达不到设计使用年限便提前被破坏。内蒙古河套灌区试验结果表明,由于受酸雨、冻融作用、含水量等因素的影响,保温板保温效果平均每年降低0.9℃,其中受含水量变化的影响最大。经试验测得:聚苯乙烯保温板(EPS)含水量每增加1%,会导致导热系数增大5%。基于多层材料串联热阻叠加原理和热阻等效原理,对保温板厚度计算公式进行完善,并提出相应的铺设方法和施工技术要求。该设计对保温板在季节性冻土区的推广应用具有一定参考价值。     

A binary approximating method for graspable region determination of biped climbing robots

For a biped pole-climbing robot (BiPCR) with grippers, it is an essential demand to determine the target grasp configuration for climbing and transiting between poles, with the graspable region as a priori knowledge. The graspable region on the target pole is critically important for climbing path planning and motion control. To efficiently compute the graspable region for a BiPCR, we propose a novel binary approximating method in this paper. This method may also be applied to generate the three-dimensional (3-D) workspace of a manipulator with constant orientation. The grasping problem and the concept of graspable region for a BiPCR are first introduced. The binary approximating method and the corresponding algorithms are then presented to generate the graspable region. Additional constraints on a biped climbing robot with five degrees of freedom (DoFs) are presented as a supplement to the algorithm. A series of comprehensive simulations are conducted with the five-DoF and six-DoF climbing robots to verify the effectiveness of the proposed method. Finally, the dexterity of biped climbing robots with different DoFs is discussed.