用C++ Builder实现数字图像的平滑处理

介绍了图像增强技术中，空间域处理方法中的邻域平均法的原理、算法，及该原理在windows平台上以C＋＋ Builder为开发工具的具体程序实现。     

STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN UBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.     

一种新的图像水印方案

目标区域是图像中视觉上最重要的部分。针对现有的水印算法很少考虑图像中确定的目标区域这一问题，提出了一种基于目标区域的水印方案(WIOR)。方案首先利用小波变换分析图像的目标特征，并依据图像的小波高频系数特征对其进行聚类，获得水印的嵌入域，在此嵌入域中，选择小波系数并对其进行量化调制来嵌入二值扩谱水印；同时，通过只在图像的局部区域内嵌入较少的水印信息来改善水印的隐蔽性。实验结果表明，该方案对于一类具有突出目标特征的图像具有较好的效果。嵌入的水印主要优势在于真正把水印嵌入图像的视觉重要部分，从而能有效地抵御剪切攻击，而且可以实现盲检测。     

熔体的粘度，亚稳相，相变和相图——Ⅲ．合金液相相图

对Sn（x）Bi（1-x）11种组分（x=0.10％，20％…80％，90％，100％）的熔体的粘度进行了测量，给出了它们的相变点Tt，相区和相参数；根据这些参数作出了一个二元合金液相相图；为了表明相区的划分和每个相区的结构特征提出两种相图的形式；第1，温度一组分（T-X）图，第2，结构-组分（df-x）图。     

Optically tuned superconductive-dielectric resonators with whispering-gallery modes

An analytical method is presented for calculating the resonant frequency andQ-factor of a superconducting dielectric disk resonator operating in millimeter-wave regime with whispering-gallery mode. Resonant frequency shift due to the optical generation of quasi-particles in superconducting film is investigated as a function of photon flux. An optically tunable resonant frequency of about 500 MHz is estimated, and good agreement is found between numerical results and experimental ones.     

Analyzing the Reliability of Degradable Networks

The reachability of a strongly connected network may be destroyed after link damage,Since many networds have directed links with the potential for reversal,the reachability may be restored by reversing the direction of links.In this paper,the reliability of a network that allows reversal of links in discussed.     

复杂山区静校正方法研究及效果

对于山区地震勘探，开展静校正研究是资料处理的主要问题之一。静校正精度与剖面质量密切相关，准确的静校正取决于合理的方法和正确的应用。本文在分析了复杂山区特点以及静校正难点的基础上，指出要解决好山区静校正，仅限于普通的方法是远远不够的，必须从四个关键点人手，即风化层延迟时的求取、基准面的确定、校正速度的研究以及表层模型的建立等。本文对上述问题的研究做了介绍，展示了合成延迟时法十等效速度模型反演十变速浮动基准面（地震参考面）静校正等综合技术在太行山区（山西沁源、大寨）、伊J；1丘陵山区等复杂地表区应用的例子。显著的处理效果表明，严重的山区静校正问题得到了较好的解决，满足了地下构造的叠加成像，提高了勘探精度及其整体效果。