陆相断陷湖盆中层序边界的形成机理及其识别特征研究

陆相断陷湖盆中层序边界是由于沉积物表面高出沉积基准面或盆地基准面、沉积物发生剥蚀或无沉积作用所形成的，其产生机理主要有边界断层停止活动、断块翘倾活动、湖盆整体抬升和湖平面下降。层序边界在地震特征上、测井曲线上、钻井剖面中的岩性、岩相特征、古生物组合、微量元素的变化上均有明显的特征。利用这些特征，在济阳坳陷下第三系中识别出9个三级层序。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。     

结构安全性综合评估方法的研究

已有结构的安全性的评估是关系到社会经济、安全的重大问题。本文作者从临界结构入手，以构件失效影响面积为参考，得到了计算构件重要性系数的简便方法，结合构件的可靠度提出了定性与定量结合的结构安全性综合评估方法。从工程实例来看，本文提出的方法简单实用，与现行的鉴定标准符合得比较好。     

配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。     

Step response classification for model-based autotuning via polygonal curve approximation

A model-based autotuning method consists of an identification and a regulator tuning phase. To achieve satisfactory performance and robustness, it is advisable that both phases be tailored a priori to the characteristics of the observed process dynamics. Such characteristics include, but are not limited to, the model structure. For example, overdamped and underdamped models with the same pole-zero structure are parametrised and controlled in different ways. Step response data, that are typically used for the identification phase in the autotuning context, can also be pre-processed to reveal those characteristics. This paper presents a step response classification method suitable for the above purpose. The method is based on a polygonal curve approximation technique for data pre-processing, followed by a neural network classifier. Only normalised I/O data are employed, so that the neural network can be trained off-line with simulated data. Simulation results are reported to show the effectiveness of the proposed classification method in terms of the achievable tuning results.     

Discrete-time adaptive sliding mode power system stabilizer with only input/output measurements

In this paper a discrete-time adaptive sliding mode control method is newly developed and applied to the power system stabilization problem. A controllable canonical form of state space realization is constructed using the parameters identified by the on-line recursive least squares method and the system state is estimated from the input/output measurements and the simple state transformations. The identified parameters and the estimated state are then used by the discrete-time sliding mode control, which is suitable for the digital equipment. The most important advantage of the proposed power system stabilizer (PSS) is that it is able to maintain its regulating performance with a slower sampling period than that of the conventional sliding mode PSS because it is developed in a pure discrete-time domain. Another advantage of the proposed PSS is that it needs neither a mathematical model of the power system nor the full-state measurements because they are identified through on-line identifications. Several computer simulations for the linear power system are performed to verify the performance of the proposed PSS. In the computer simulations for various circumstances which are probable in a power system are considered, such as transitions of the active and reactive powers, change of parameters of the synchronous machine, line-to-ground faults and measurement noise. As a result, a new power system stabilizer which can operate in a wide range of operating conditions and can overcome various disturbances and measurement noises is proposed.     

Parameter identification for nonlinear systems: Guaranteed confidence regions through LSCR

In this paper we consider the problem of constructing confidence regions for the parameters of nonlinear dynamical systems. The proposed method uses higher order statistics and extends the LSCR (leave-out sign-dominant correlation regions) algorithm for linear systems introduced in Campi and Weyer [2005, Guaranteed non-asymptotic confidence regions in system identification. Automatica 41(10), 1751-1764. Extended version available at 〈http://www.ing.unibs.it/∼campi〉]. The confidence regions contain the true parameter value with a guaranteed probability for any finite number of data points. Moreover, the confidence regions shrink around the true parameter value as the number of data points increases. The usefulness of the proposed approach is illustrated on some simple examples.     

How to make and defend a proposal in a deliberation dialogue

In this paper it is shown how tools developed in argumentation theory and artificial intelligence can be applied to the development of a new dialectical analysis of the speech act of making a proposal in a deliberation dialogue. These tools are developed, modified and used to formulate dialogue pre-conditions, defining conditions and post-conditions for the speech act of making a proposal in a deliberation dialogue. The defining conditions set out what is required for a move in a dialogue to count as the making of a proposal by one of the parties. What is required are the conditions that (1) the move fit the requirements of the argumentation scheme for practical reasoning, and (2) the premises are propositions describing common goals of both parties or propositions that they reasonably consider means to achieve these goals. The analysis goes beyond the standard speech act approach by specifying not only the normative requirements for making a well-formed proposal, but also the requirements for responding to it by questioning or criticizing it, and the requirements for defending it.     

舰用燃气轮机框架模型的模态参数识别

本文采用一次有理正交多项式－多模态曲线合法对一舰用燃气轮机框架模型进行了实验模态分析，以Ｆｏｒｓｙｔｈｅ复合交多项式作为频响函数的理论值，用实测的频响函数建立系数矩阵，来寻找使目标函数最小的最优值，本文在ＨＰ９８２６微机上建立了建立了测试，数据采集及参数识别等系统识别软件，给出了具有工程实用意义的前五阶振动模态参数，识别结果和有限元计算相比较，令人满意。     

地层微电阻率成像测井在中原油田的应用

介绍地层微电阻率测井(FMI)技术以及它在地质构造解释、沉积学解释、裂缝识别、地层分析等方面独特的枝术优势,并详细介绍了FMI在中原油田濮深X井的实际应用,进行了应用效果分析,指出成像测井是未来油田油气勘探开发的重要技术手段。