UV-LED光固化体系光引发剂的新进展

本文综述了可用于UV-LED光固化体系光引发剂的研究进展，包括传统光引发剂及其衍生物（硫杂蒽酮类、二苯甲酮类和酰基膦氧化物）、新型基团的光引发剂（咔唑基、萘酰亚胺基、吩嗪基、苯丙二茂基、咪唑基和三嗪基）以及高分子光引发剂。传统光引发剂的改性和大分子光引发剂的合成，可以提高引发剂的稳定性。新型光引发剂的吸收波长与UV-LED光固化的发射波长匹配性较好，但该类光引发剂常需要加入助剂。此外，描述了氧阻聚对光固化体系的影响，指出了目前UV-LED光引发剂存在的不足，并展望了其发展应用前景。。     

Single‐pack,self‐curable,aqueous‐based polyurethane dispersion containing a disperse dye

An organic‐solvent‐soluble disperse dye was introduced into an aqueous phase by a reaction with a self‐emulsified, aqueous‐based polyurethane (PU), and this resulted in the formation of a homogeneous, aqueous polymeric dye dispersion. This aqueous polymeric dye was stable in a water phase with excellent color extension upon application. It was formulated with a latent curing agent, polyaziridine (e.g., TMPTA‐AZ), as a single‐component, self‐curable, aqueous polymeric dye. The curing reaction took place between PU carboxylic acid and the latent curing agent upon drying. A self‐cured polymeric dye was obtained with excellent color extension and fastness and resistance to organic solvents and water after drying. This single‐component, self‐curable, aqueous‐based PU system containing a dye has potential for printing, writing, and dyeing applications. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 2006 © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3741–3747, 2006     

Adhesion properties of UV crosslinked polystyrene-block-polybutadiene-block-polystyrene copolymer and tackifier mixture

The peel and tack properties of mixtures of polystyrene-block-polybutadiene-block-polystyrene (SBS) and a tackifier were investigated after these were crosslinked by ultraviolet (UV) irradiation at various amounts of benzophenone (BP) as a photoinitiator and trimethylolpropane mercaptopropionate (TRIS) as a crosslinking agent.The degree of crosslinking of polybutadiene (PB) block in the SBS mixture was qualitatively estimated from the amount of gel fraction as well as the change in the glass transition temperature of the PB block. The crosslinking of the PB block was done within 3 min after UV irradiation and the peel strength of crosslinked specimens was as low as 45[percnt] of specimens without crosslinking. Nano-tack and bulk tack properties as well as the surface tension of mixtures were measured depending upon amounts of BP and TRIS.     

Mechanical characterization and chemical resistances of cured unsaturated polyester resins modified with vinyl ester resins based on recycled poly(ethylene terephthalate)

Unsaturated polyester resin (UP) was prepared from glycolyzed oligomer of poly(ethylene terephthalate) (PET) waste based on diethylene glycol (DEG). New diacrylate and dimethacrylate vinyl ester resins prepared from glycolysis of PET with tetraethylene glycol were blended with UP to study the mechanical characteristics of the cured UP. The vinyl ester resins were used as crosslinking agents for unsaturated polyester resin diluted with styrene, using free‐radical initiator and accelerator. The mechanical properties of the cured UP resins were evaluated. The compressive properties of the cured UP/styrene resins in the presence of different vinyl ester concentrations were evaluated. Increasing the vinyl ester content led to a pronounced improvement in the compression strength. The chemical resistances of the cured resins were evaluated through hot water, solvents, acid, and alkali resistance measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3175–3182, 2007     

Application of Taguchi method in determining optimum level of curing system of NBR/PVC blend

Taguchi method is applied in this study to determine the optimum level of curing system (sulfur, MBTS, and CBS) in a NBR/PVC blend. By considering physicomechanical properties of cured NBR/PVC blend, optimum level of curing system is determined. A fixed master batch formulation of NBR/PVC is used, and the effect of curing system is studied on the physicomechanical properties of NBR/PVC blend, such as tensile strength (TS) and elongation‐at‐break (EB) before and after aging and also hardness and abrasion. The L9 orthogonal array that includes nine rows and four columns is applied. In this matrix, rows show the experiments and three columns show the amount of three factors (sulfur, MBTS, and CBS) and one column is left arbitrarily as an empty column. In this array, the columns are mutually orthogonal. The optimum physicomechanical properties of cured NBR/PVC blend are at 2 phr sulfur, 2 phr MBTS, and 0.5 phr CBS of curing system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5358–5362, 2006     

Loss of Curing Agent During Thin Film (Droplet) Curing of Thermoset Material

Recently, it has been reported by our group and others^1.2 that loss of curing agent is encountered during the curing of small droplets or thin films of amine cured epoxies. In our earlier study³ results were reported on loss of curing agent in small droplets used in conducting the rnicrobond, single fiber test for determination of interfacial shear strength (ISS). It was reported that use of a volatile curing agent (meta-phenylene diamine (m-PDA) with DGEBA resin) resulted in increasing amounts of curing agent being lost (as measured by T₈ of the cured droplets) with decreasing droplet size during the processing procedure. Droplets smaller than 150 micrometers were seen to lose up to 40% of the curing agent leading to alteration of the mechanical properties of the droplet and, therefore, causing measured values of ISS to be exceedingly low. Use of a less volatile curing agent (Jeffamine 700, a polyether diamine, Texaco Specialty Chemicals) in combination with DGEBA resin produced results which indicated that loss of curing agent was not occuring. This study was undertaken to show the relationships between film (or droplet) size and the amount of curing agent lost (during the processing) for three different aminecured epoxy systems.     

专用粉末涂料和涂装发展的新展望

新型专用粉末涂料以其涂膜超薄型化、低温固化和高耐候性等优势,并以预裁割坯料新工艺代替预涂装卷材工艺的新特点,将成为粉末涂料新的增长点。还提出了若干建议和意见。     

纳米粒子/环氧树脂复合材料的固化动力学研究

在纳米Al2O3、Si3N4、SiC填充环氧树脂复合材料体系中,纳米粒子表面活性及粒子与环氧树脂之间的相互作用影响着环氧树脂的固化过程.本文利用傅立叶红外光谱表征了纳米粒子与环氧树脂之间的化学作用情况,并利用差视扫描量热仪研究了不同纳米粒子/环氧树脂复合材料的固化动力学.结果表明,具有相对最强表面活性的纳米Al2O3粒子与基体之间的相互作用最强,同时该粒子对环氧树脂固化过程的促进作用最显著.     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

天然橡胶不同硫化体系磨耗微观结构的研究

通过对天然橡胶不同硫化体系硫化胶磨耗前后的红外光谱分析，得知常温下硫化胶的磨耗历程是具有氧化反应的力化学反应，单，双硫键较多的硫化胶具有较好的耐磨性。