三维有限元法分析频率对接地电阻的影响

提出了用涡流场的A-V有限元分析方法计算接地系统接地电阻的方法,分析了入地电流频率的变化对接地电阻的影响。计算结果表明,频率对接地体自身电阻的影响较大,但对散流电阻的影响很小。     

三相异步电动机运行指标的分析

利用电机学理论分析了影响电机起动转矩、起动电流、最大转矩和最小转矩的因素。     

高速电路中地电流的影响及其对策

从理论上分析了产生地电流干扰的原因，从而在实践上提出了一些经常被忽略，却是行之有效的方法来减小地电流的干扰，设计出高质量的电路。     

网络技术在中州分公司计量管理工作中的应用探讨

本文通过对中州分公司正在考虑建设的信息网建设实际情况，结合山东分公司、广西分公司取得的经验，对计量管理信息网的应用进行了探讨。     

主电机轴瓦异常情况分析解决办法

介绍南钢中板厂四辊轧机主电机轴瓦一种非典型故障现象，原因分析及解决办法，提出了对类似问题个人见解。     

高频微型脉冲管制冷机的实用化研究

脉冲管制冷机经过多年的发展，性能不断改善，目前已开始进入实用化阶段。高频微型脉冲管制冷机结构紧凑，应用方便，并且主要工作在需求量较大的液氮温区，因此将首先得到一定规模的应用。介绍了作者针对脉冲管制冷机在红外和超导方面的应用所作的实用化工作，讨论了尚待解决的问题。     

Sediment Concentration and Its Prediction by Perceptron Kalman Filtering Procedure

Predictions of the discharge and the associated sediment concentration are very useful ingredients in any water resources reservoir design, planning, maintenance, and operation. Although there are many empirical relationships between the discharge and sediment concentration amounts, they need estimation of model parameters. Generally, parameter estimations are achieved through the regression method (RM), which has several restrictive assumptions. Such models are locally valid and their structures and parameter values are questionable from region to others. This paper proposes a new approach for sediment concentration prediction provided that there are measurements of discharge and sediment concentration. The basis of the methodology is a dynamic transitional model between successive time instances based on two variables, namely, discharge and sediment concentration measurements. The transition matrix elements are estimated from the measurements through a special form of the artificial neural networks as perceptrons. The sediment concentration predictions from discharge measurements are achieved through a perceptron Kalman filtering (PKF) technique. In the meantime, this technique also provides temporal predictions. A certain portion of the measurement sequence is employed for the model parameter estimations through training and the remaining part is used for the model verification. Detailed comparisons between RM and PKF approaches are presented and, finally, it is shown that the latter model works dynamically by simulating the observation scatter diagram in the best possible manner with smaller prediction errors. The application of the methodology is performed for the discharge and sediment concentration measurements obtained from the Mississippi River basin at St. Louis, Missouri. It is found that the PKF methodology has smaller average relative, root-mean-square, and absolute errors than RM. Furthermore, graphical representation, such as the scatter and frequency diagrams, indicated that the PKF approach has superiority over the RM.     

脉冲电镀最佳参数之探索和优化

本文利用正交实验法对脉冲电镀各控制参数进行试验,对影响分散能力、镀层可靠性及外观质量的各种因素进行探讨,寻找影响外观质量的显著因子并加以控制,同时进一步优化脉冲电镀的工艺参数。     

L波段窄脉宽500W固态功放组件的设计

介绍了作者研制的应用于固态雷达发射机上的L波段500W固态功放组件的工作原理、用途及其主要技术指标。描述了功放组件的设计过程和测试结果。该功放组件在窄脉宽条件下实现了快速上升沿,性能优良,工作稳定可靠。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。