含硼石墨中甲烷的热解吸行为研究

研究了含硼石墨ＧＢ１１０（１０ｗｔ．％Ｂ）甲烷（ＣＨ４）的热解吸谱,发现甲烷的解吸谱主要由３个峰构成,估算出了ＣＨ４不同峰值的解吸激活能。为了弄清含硼石墨中甲烷的形成与解吸机理,分别对高纯石墨ＩＳＯ８８０Ｕ和Ｂ４Ｃ涂层进行了热解吸实验,同时对材料的微观结构进行了分析。经过比较,表明甲烷在含硼石墨中的形成与解吸有３个过程：氢离子注入导致甲烷沿气孔内壁形成,并通过石墨内部的微通道向表面自由扩散;被石墨中Ｂ４Ｃ析出物所俘获的氢原子与Ｂ４Ｃ化合物中的碳原子反应,从而生成甲烷并解吸出来;以及石墨晶格俘获的氢原子与碳原子化学反应产生的甲烷,通过体扩散过程解吸。其中前后两个过程起主导作用。     

Experimental and numerical study of the isotherms and determination of physicochemical parameters of the hydrogen absorption/desorption process by the metal hydrides

In this work, absorption/desorption isotherms of the LaNi_3·6Mn_0·3Al_0·4Co_0.7 alloy, have been determined from the experimental data at three temperatures (T_Fluid = 298 K, T_Fluid = 303 K, and T_Fluid = 313 K). However, the experimental isotherms are compared with a proposed theoretical model. The physicochemical parameters of the proposed model are determined from the experimental data. Using these parameters, the absorption and desorption processes of hydrogen by the LaNi_3·6Mn_0·3Al_0·4Co_0.7 alloy can be compared. During the absorption/desorption process, the behaviors of each parameter are studied under the effect of temperature and pressure. In addition, internal energy, entropy, and enthalpy are calculated by using the proposed model. On the other hand, the temperature and pressure effects on the variation of these functions have been studied. The calculated physicochemical parameters suggested that the hydrogen absorption/desorption process in the LaNi_3·6Mn_0·3Al_0·4Co_0.7 alloy was feasible, spontaneous and exothermic in nature.     

Experimental study of a metal –hydrogen reactor's behavior under the action of an external magnetostatic field during absorption and desorption

The aim of this work is to experimentally study, the behavior of a metal-hydrogen reactor (MHR) subjected to the action of an external magnetostatic field, during hydrogen absorption and desorption by the LaNi5 hydride. The reactor was surrounded by a copper coil crossed by a continuous current delivered by a DC generator. In this study, the mass of the absorbed and desorbed hydrogen was measured and plotted for different initial temperatures and pressures functions of the applied magnetostatic field. The ratio of the hydrogen mass absorbed or desorbed with and without supplying a magnetostatic field was estimated after which the change in the saturation magnetization per 1 mol of desorbed hydrogen atom (ΔM_s), for the LaNi₅ compound; was determined.The results demonstrated that while the increase in temperature was not beneficial for the absorption reaction, it improved the desorption process. The increase in pressure leads to an increase in the absorbed hydrogen mass. The effect of the applied magnetostatic field was observed especially for the lowest temperatures in the case of the absorption reaction. In fact, we noticed a small increase in the absorbed mass, which decreased and disappeared in the highest temperatures. It was found that the magnetostatic field had no effect on the desorption reaction for the tested fields and temperatures. The low value of ΔM_s confirmed the paramagnetic nature of the sample.     

Effect of plastic deformation at room temperature on hydrogen diffusion of S30408

Understanding the influence of plastic deformation on diffusion is critical for hydrogen embrittlement (HE) study. In this work, thermal desorption spectroscope (TDS), slow strain rate test (SSRT), feritscope, transmission electron microscope (TEM) and TDS model were used to study the relation between plastic deformation and hydrogen diffusion, aiming at unambiguously elucidating the effect of plastic deformation on hydrogen diffusion of austenitic stainless steel, S30408. An effective method was developed to deduce apparent hydrogen diffusion coefficient of austenitic stainless steel in this paper. Results indicate apparent hydrogen diffusion coefficient decreases firstly and then increases with increasing plastic deformation at room temperature. Hydrogen diffusion effected by plastic deformation is a complicated process which is suggested to be divided into two processes controlled by dislocation and strain-induced martensite, respectively, and the transition point is about 20% strain demonstrated by experiments in this case.     

Fundamentals of hydrogen storage processes over Ru/SiO2 and Ru/Vulcan

Hydrogen adsorption and desorption over Ru/SiO₂ and Ru/Vulcan are investigated in terms of hydrogen storage and release characteristics by both dynamic and static experiments. Ru particle dispersions as a function of metal loading were determined by HR-TEM and volumetric chemisorption experiments. Vulcan was more accommodating for spillover hydrogen than SiO₂. High Ru dispersions, i.e., small particle sizes, favored the amount of hydrogen spillover to Vulcan, as revealed by temperature programmed desorption (TPD) of hydrogen. TPD of hydrogen under He flow experiments over Ru/SiO₂ and Ru/Vulcan materials revealed a low temperature process (up to 200 °C) attributed to desorption of weakly bound hydrogen from Ru metal surface. A high temperature process (above 450 °C) was attributed to diffusion of hydrogen from the support to the Ru particle and desorption at the Ru sites. Hydrogen adsorbs strongly on Ru metal, as indicated by the initial heats of H₂ adsorption measured as 100 kJ/mol over 1 wt% Ru/Vulcan by adsorption calorimetry. At higher coverages, heat of adsorption of hydrogen was measured as 10 kJ/mol. Low heat of adsorption of hydrogen at high coverages indicate multilayer weak adsorption of hydrogen over the storage material, which can desorb at lower temperatures.     

大孔树脂对紫玉米花青素的静态吸附与解吸特性研究

为了筛选出对紫玉米花青素粗提液纯化性能好的树脂,采用AB-8型、X-5型、D101型和NKA-9型4种大孔树脂对紫玉米花青素进行静态吸附和解吸实验,研究了大孔树脂对紫玉米花青素的静态吸附动力学曲线,以Langmuir单层吸附方程制定吸附等温曲线,并研究了不同pH条件下对大孔吸附树脂吸附的影响及不同树脂的解吸特性。结果表明:X-5树脂吸附平衡速率常数最大,达到饱和吸附量所用时间最短,经Langmuir单层吸附回归方程预测出X-5树脂静态吸附时最大吸附量可达到53.1915mg/g。在pH=4时,饱和吸附量最大。因而X-5可用做纯化紫玉米花青素较为合适的吸附剂,解吸时宜选用40%乙醇做为洗脱液。     

蒸制时间对粉蒸肉挥发性风味成分的影响

采用氮气吹扫/捕集-热脱附-气相色谱-质谱-嗅闻仪联用法对一种粉蒸肉产品加工过程中挥发性风味物质进行测定以确定最佳蒸制时间。结果显示：未加热和分别蒸制30、60、90?min?4?个粉蒸肉样品中共检测到77?种挥发性风味物质,各阶段分别为69、43、50?种和56?种,共有物质33?种。在加工过程中,挥发性物质的总含量呈现逐渐增加的趋势,由加热前的1?646.39?μg/kg增加至2?657.10?μg/kg,且3?个加热时间样品中挥发性物质种类也逐渐增多。但是通过气味活度值（odor activity value,OAV）分析,对风味具有贡献的化合物（OAV＞0.1）含量均呈现先增加后降低的趋势,在加热60?min时OAV最大。其中壬醛、癸醛和肉桂酸甲酯对粉蒸肉产品特征风味的形成贡献最大,构成了粉蒸肉的特征风味。主成分分析显示加热60?min样品与其他样品区分明显并且在第1、2主成分上贡献较高。总体来说蒸制60?min能使产品获得较好的风味。     

微波管内的表面击穿

全面介绍了真空条件下表面击穿的研究状况,重点讨论了二次电子发射雪崩理论,论述了二次电子发射、陶瓷表面处理、磁场、解吸附等因素对表面击穿的影响,并讨论了增加表面击穿电压的各种办法.为研究微波管的人员提供了理论参考.     

Intraparticle diffusivity of Cd ions in a new biosorbent material

Cadmium equilibrium sorption isotherms were determined for formaldehyde crosslinked Sargassum fluitans, establishing that an effective regeneration of the new biosorbent material is possible by an acid wash. Batch desorption kinetics were investigated at pH values of 1·0 and 2·0. By incorporating the linear and non-linear Langmuir equilibrium isotherm relationships into the rate equations, a mathematical model was proposed for modeling the metal desorption process. The model was solved numerically and a MATLAB computer program was used to curve-fit the experimental data. The model successfully predicted the Cd²⁺ elution concentration profile in a batch reactor. The average values of the intraparticle diffusivity of Cd²⁺ in the algal biosorbent calculated from the model were 3·40 × 10⁻⁶ and 1·65 × 10⁻⁶ cm² s⁻¹, 0·473 and 0·229 times the molecular diffusivity of Cd²⁺ in water, at pH values of 1·0 and 2·0, respectively. These values agreed well with theoretical predictions.     

Lead desorption from modified spent grain

Lead-loaded modified spent grain regenerated by desorption process was investigated. HCl, H₂SO₄, H₃PO₄, NaOH, NaCl and ultrapure water were chosen as desorption agents to treat lead-loaded modified spent grain for 30 min. The structures and components of regenerated modified spent grain before and after adsorbing Pb(II) were investigated using scanning electron microscopy(SEM), energy-dispersive analysis of X-ray(EDAX) and Fourier transform infrared spectrometry(FTIR). The results indicate that lead-loaded modified spent grain treated in 0.1 mol/L HCl exhibits higher elution efficiency (86.44%) as compared with other agents. The enrichment of carboxyl and hydroxyl groups susceptible to combine with Pb(II) are observed in the regenerated modified spent grain, which may result in high re-absorption efficiency of Pb(II). Moreover, C—Cl, N—H, C—N and O—H (polysaccharides) also play an crucial role in Pb(II) binding to regenerated modified spent grain.