Experience with Siberian Centralized Dispatch Regulation regarding location determination of damages sustained by intersystem high-voltage transmission lines

A set of measures that can be implemented by the Relay-Protection and Automated-Equipment Service for Centralized Dispatch Regulation (CDR) in Siberia to determine the location of damage sustained by inter-system 550-and 220-kV transmission lines maintained by the United Power System (UPS) of Siberia, and the methodology and technology of damage-location determination (DLD) are described. The damage sustained by the 500-kV high-voltage lines (HL), and the accuracy of DLD relative to zero-sequence emergency parameters are analyzed statically. __________ Translated from élektricheskie Stantsii, No. 5, pp. 59–62, May, 2006.     

丙酰芸苔素内酯的气相色谱分析

采用毛细管柱气相色谱法,以(22E,24S) 2,22 二烯 5α 豆甾 6 酮为内标,对丙酰芸苔素内酯进行定量分析。色谱条件为12m× 0.53mm,膜厚1.5μm(CBP 1固定液)熔融石英毛细管柱,柱温为305℃,检测器、汽化室温度为320℃,载气流速为20mL/min。该方法检测丙酰芸苔素内酯质量分数的平均标准偏差为0.39%,平均回收率为100.4%。方法操作简便,定量准确。     

过渡金属元素催化羟自由基反应机理研究

针对显色剂－过渡金属元素－过氧化氢体系，用分光光度法间接测定羟自由基。通过大量试验，确定了三苯甲烷类酸性酚醌吡喃类为有效显色剂，并确定了溴邻苯三酚红－亚铁离子－过氧化氢体系测定羟自由基的最佳条件，首次推测出其最可能的反应机理为：亚铁离子催化过氧化氢产生羟自由基，羟自由基氧化溴邻苯三酚红上的羰基碳氧双键，破坏其显色的共轭结构，使其褪色，此法可作为筛选羟自由基清除剂的有效方法。     

食品中病原菌检测技术研究进展

介绍了许多食品安全检测新技术和新方法,包括生化检测技术、免疫学技术、PCR检测技术、生物芯片技术、传感器技术、流式细胞术和基因探针技术,并且阐述了食品安全检测技术的发展趋势,这些技术的发展将会在食品卫生检验方面起到越来越重要的作用,最终将达到预防肠道传染病和食物中毒发生的目的。     

A new amperometric biosensor for fructose determination based on epoxy-graphite-TTF-TCNQ-FDH-biocomposite

In this work a novel amperometric biosensor for fructose determination in solutions was developed. The device was constructed by the incorporation of a tetrathiofulvalene-tetracyanoquinodimethane organic conducting salt and fructose dehydrogenase enzyme, include in a polymeric matrix of epoxy resin and graphite powder. Because of the electrocatalytic function of the salt, the direct transfer of the electron between the reduced prosthetic group (PQQH₂) of the enzyme and the transducing material, was verified at a low working potential (150 mV vs. Ag/AgCl), where the interfering reactions were minimized. The response time at 90% of the steady state value was less than 20 s. The current response was directly proportional to the D-fructose concentration from 0.01 to 0.3 mmol/l with a detection limit of 0.005 mmol/l (signal/noise of 3) and a sensitivity of 1.9985 μA/mmol. The biosensor sensitivity diminishes when its surface is not polished between successive determinations, and remains constant (rsd=1.85, n=10) when the surface is polished between determinations. The effects of temperature and pH on the biosensor response were studied and analyzed; also the properties of the enzyme (Km _ap, I _max, Q₁₀) were determinate in this work. The biosensor was used to determine fructose in high fructose syrups and there were not significant differences between these results and those obtained by HPLC (p≤0.05). During 4 months, in intermittent determinations the biosensor kept 100% of its original sensitivity and after 18 months stored at 4°C, it only lost 32% of its sensitivity. The simplicity, low working potential, high stability and good performance of this biosensor shows a great potential for its use in the fructose determination.     

EASY2000色谱处理系统在酒样色谱分析中的运用

介绍了EASY2000色谱处理系统在酒类产品分析实际应用过程中的方法，步骤，特点及注意事项等。     

XRF法测定高岭土中的主次量元素

采用X射线荧光光谱法取代原有的化学法，分析了高岭土中的9种主次量元素。通过对测定条件的选择以及样品制备等方面的考察，制定出最佳分析方案。分析结果表明，该方法准确、可靠，分析周期由原来的6h缩短为10min.     

示差光度法测定钛铁中钛含量

采用示差光度法测定钛铁中钛含量，钛的测定范围10．00％～30．00％，满足炼钢生产中的快速测定。     

原子吸收分光光度法测定焦锑酸钾中锑含量

比较详细地研究用火焰原子吸收分光光度法测定焦锑酸钾中锑含量的技术条件和测定方法。     

Determining the characteristics of systems with multiple inputs and multiple outputs

A simple and computationally efficient method of determining the transfer function and other characteristics of systems with multiple inputs and multiple outputs (MIMO systems) described by autoregression equations is proposed. The method is based on the use of the discrete Fourier transformation. The algorithm is highly suitable for computer implementation. The efficiency and simplicity of the method are illustrated using the example of a system with three inputs and three outputs. The proposed concept may be applied to systems described by the autoregression sliding mean.