轻量级PRESENT加密算法功耗攻击研究

PRESENT密码算法是2007年提出来的一种轻量级分组密码算法, 适合于物联网环境下的安全加密。对PRESENT加密算法结构进行了深入研究, 提出了其适合功耗攻击的两个最佳攻击点, 详细介绍了针对PRESENT加密系统进行功耗分析攻击的设计与实现过程, 实验结果表明未加防护措施的PRESENT加密系统不能抵御一阶差分功耗分析攻击, 从而给PRESENT加密算法的安全改进提供一定的设计参考。     

基于贪婪算法无线传感器网络中继节点布局的研究

为实现远距离的无线通信, 在网络中添加中继节点, 采用多跳路由传输数据。对于中继节点的布局问题, 依据线性结构使网络整体能量消耗最小的特征, 提出一种中继节点贪婪布局算法。该算法通过最近贪婪策略、中继节点通信容量、传感器节点数据转发跳数等约束方法限制中继节点的布局位置。理论分析和实验验证了该算法能够有效减少能量消耗, 延长网络寿命。     

云数据库中基于极大熵差分进化的负载评估算法

由于分布式关系型数据库基于两阶段提交协议的设计方式,使得系统如出现单节点瓶颈问题,数据库事务将全部回滚,从而造成巨大的系统开销,影响数据库在大数据环境下的应用。针对这一现状,提出一种基于极大熵差分进化的负载评估算法,利用评价函数法,将多目标优化问题转化为不可微的单目标优化问题,再利用极大熵函数,将不可微优化问题转化为一个带有参数的无约束优化问题,最后用差分进化算法对其进行求解,找出节点资源最优集,从而为过载节点的数据迁移提供了理论依据,也进一步实现了对云数据库的设计。实验结果表明,该算法能够提高系统的整体性能,有效避免单节点瓶颈问题。     

Studies on polyacrylates containing pendant ligand with carbonyl and hydroxyl functions and their divalent metal complexes

A series of monomers were prepared by reacting (meth)acryloyl chloride with 2,4‐dihydroxybenzophenone, 2,4‐dihydroxybenzaldehyde, and 2,4‐dihydroxyacetophenone, respectively. The monomers were polymerized in dimethylformamide (DMF) at 70°C using benzoyl peroxide as an initiator. Polymer–metal complexes were obtained from DMF solutions of polymers with an aqueous solution of metal ions. The polymers and polymer–metal complexes were characterized by elemental analysis and spectral studies. The IR spectra of these complexes suggest that the metals are coordinated through the oxygen of the carbonyl group and the oxygen of the phenolic–OH group. The electronic spectra, electron paramagnetic resonance (EPR) spectra, and magnetic moments of polychelates showed an octahedral and square planar structure for Ni(II) and Cu(II) complexes, respectively. X‐ray diffraction studies revealed that polychelates are highly crystalline. The thermal and electrical properties, catalytic activity, and structure–property relationships are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2083–2090, 2003     

电力系统一二次调频的反馈微分博弈协同控制

风能等间歇式能源并网将是未来电网发展趋势,其输出功率的波动将加剧一二次调频之间的冲突反调问题.本文将反馈微分博弈应用于电力系统频率控制中,建立起一二次调频的协同控制模型,并考虑调速器死区、控制动作幅值限制、机组爬坡速率约束等工程实际因素,用协同进化算法求得该模型的反馈纳什均衡解.用仿真验证了该方法在满足各种工程因素下有效解决一二次调频的冲突反调问题,充分挖掘了系统蕴藏的调频能力.     

变邻域分解多目标自适应差分进化算法

分解方法是处理复杂问题常用的一种手段,而差分进化算法被广泛地应用于多目标优化问题(multiobjective optimization problems,MOP),为了克服经典差分进化算法和分解方法的缺陷,本文提出了一种自适应差分进化算法和变邻域分解方法相结合的新颖算法一ADEMO/D-ENS,该算法采用Tchebycheff方法将多目标优化问题分解成多维标量优化子问题,并利用邻域子问题的信息进行优化,基于邻域种群集依概率自适应选择邻域种群规模;同时采用概率匹配(]probability match,PM)自适应方法从差分策略池中选择差分进化策略;同时分析了算法的复杂度;最后,通过和经典的非支配排序遗传算法(non-dominated sorting genetic algorithmsⅡ,NSGA-Ⅱ)和多目标差分进化算法(multi-objective differential evolution algorithm,MODE)仿真对比,说明ADEMO/D-ENS方法可以更有效的处理多目标优化问题.     

采用有限元分析法量化不同中空玻璃边缘密封的热位移

间隔条和玻璃板片之间的相对热位移是中空玻璃边缘密封乃至中空玻璃(IGU)本身老化的主要原因之一.作者采用有限元分析法(FEA),建立了发生在大尺寸(1.5 m×2.1 m)的中空玻璃边缘密封的热位移与温差变化之间的模型,这是三种商业化的、不同材质的、不同设计的间隔条,在温度变化为-30～ 60℃范围内的模型.此模型是基于铝间隔条和镀锌钢间隔条与尼龙插角的搭配,不锈钢间隔条和弯曲插角的搭配.尼龙插角假定为实心的并稳固地固定于间隔条上;弯曲插角被建模成实心弯曲的金属插角,并同样稳固地固定于间隔条上.由于实际的弯曲插角是空心的,模型可能高估了这种转角设计的应力.正如预期那样,在低温时,插角会被向内拉,导致弯曲角度大于90°;在高温下,插角会被向外推,导致弯曲角度小于90°.通过检测发生在中空玻璃周边第一道密封的聚异丁烯密封胶厚度的变化,作者发现,到目前为止,不锈钢间隔条对于截面积的变化影响最小;铝制间隔条的影响最大.这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致.因此,热位移引起的第一道密封的有效扩散横截面变化,可以解释为何具有不同间隔条材料的中空玻璃之间的性能差异.     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

Restricted chain segment mobility in poly(amide) 6/clay nanocomposites evidenced by quasi-isothermal crystallization

Modulated temperature differential scanning calorimetry is used to explore the interactions between a poly(amide) 6 matrix and various types of clay reinforcement. During quasi-isothermal crystallization of the polymer/clay nanocomposites, an excess contribution is observed in the recorded heat capacity signal, due to reversible melting and crystallization. It is proposed that the magnitude of this excess contribution can be used to qualify the polymer/clay interfacial interaction, as it is directly linked to the segmental mobility of the polymer chains in the interphase region, where both the crystalline and amorphous polymer fractions are affected. It is shown that the interfacial interaction strongly depends on the type of clay filler used. These interactions play a key role in the development of specific material properties for the different types of nanocomposites. A simple interphase model for the poly(amide) 6/clay nanocomposites is proposed.