基于Matlab的线性规划问题求解

线性规划是运筹学中研究较早、发展较快、应用广泛、方法成熟的一个重要分支,它是辅助人们进行科学管理的一种重要的数学方法.文章首先介绍了线性规划的基本概念及标准形式,着重讨论了线性规划问题的三种常用解法:单纯形法、直接搜索法以及遗传算法,最后在Matlab R2009a环境下进行了仿真.通过结果可以看出,用Matlab求解线性规划问题,可以避免手工的烦琐计算,大大地提高工作效率和结果的准确性.     

A novel compact low-power direct conversion receiver for mobile UHF RFID reader

A novel direct conversion receiver with low cost and low power is implemented in a 0.18 μm 1P6M standard CMOS process for a Mobile UHF RFID reader.A highly linear active mixer with low flicker noise and low noise active load is proposed.An efficient and low cost on-chip DC offset voltage canceling scheme is adopted with a high-input-impedance four-input OPAMP to buffer the output of the DC offset canceller(DCOC) block.The receiver has a measured input 1 dB compression point of 2 dBm and a sensitivity of 72 dBm in the presence of the large leakage signal from the transmitter.Only occupying a silicon area of 2.5 mm 2 and consuming 21 mA from a 1.8 V supply,the receiver makes the mobile UHF RFID reader to communicate with a transponder in a distance of 1 m conveniently.     

融合信任关系与评论文本的矩阵分解推荐算法

针对推荐系统中用户评分数据稀疏所导致推荐结果不精确的问题,本文尝试将用户评分、信任关系和项目评论文本信息融合在概率矩阵分解方法中以缓解评分数据稀疏性问题.首先以共同好友数目及项目流行度改进皮尔逊用户偏好相似程度并将其作为用户间的直接信任值,然后考虑用户间信任传播过程中所有路径的影响构建新的信任网络;其次通过BERT预训练(Pre-training of Deep Bidirectional Transformers for Language Understanding)模型提取项目的评论文本向量,构造项目的评论文本特征矩阵;最后基于概率矩阵分解(Probabilistic Matrix Factorization,PMF)模型融合用户的评分数据、用户的信任关系以及项目的评论文本信息进行推荐.通过不断的理论分析并在真实的Yelp数据集上进行实验验证,均表明本文算法的有效性.     

基于滑模变结构的感应电动机直接转矩控制

针对感应电动机常规直接转矩控制中存在磁链、转矩脉动大,低速控制不精确等问题,在建立α-β坐标系感应电动机数学模型的基础上,提出了一种基于滑模变结构的新型直接转矩控制方法。该方法利用转速滑模变结构控制器代替常规直接转矩控制中的PI控制器,可有效减小常规直接转矩控制中的磁链和转矩脉动,增强了系统的稳定性。仿真结果证明了该方法的正确性。     

基于PR控制器的直接转矩控制策略研究

针对传统直接转矩控制中采用开关表控制造成转矩和电流脉动,以及传统调节器不能实现对交流输入信号的无静差控制等问题,基于电机空间电压矢量的转矩和磁链2个分量解耦的控制方式和PR控制器能够在静止坐标系下实现对交流输入信号的无静差控制,将PR控制器用于永磁同步电机的直接转矩控制中,并由此设计出磁链和转矩的双PR控制器。同时,在定子磁链的观测中,采用基于转子位置和定子电流的新型定子磁链估计方法。试验结果证明,将PR控制器对交流输入信号的无静差跟踪特性应用于基于空间电压矢量调制的直接转矩控制中,系统能获得优良的动态和静态响应,取得了显著的应用成效,由此验证了所提方法的正确性和可行性。     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

基于DD伺服传动器实现三轴联动定位的设计

直接驱动（DD）伺服是一种高性能的伺服产品，由于其特殊的构造和高精度的设计，使其在制造业、机器人领域得到广泛应用。文章结合自主设计的激光内雕机控制方案，在分析系统工作原理基础上，详述了DD伺服位置控制方法，通过整定其PID参数，实现了三轴联动系统的准确定位。     

Effects of surfactant and particle size on the microstructure and strength of Si3N4 foams with high porosity

The highly porous Si₃N₄ ceramic foams were prepared by direct foaming with mixed surfactants. The surface tension and viscosity of slurries were tailored by different carbon chain length of surfactants and different mean Si₃N₄ particle size to achieve the pore size controlling. The nearly linear relationship between the pore size and the ratio of surface tension to viscosity was observed, which indicates that the pore size could be precisely tailored by the slurry properties. Si₃N₄ ceramic foams with porosity of nearly 94%, mean pore size of 110–230 µm, and compressive strength of 1.24–3.51 MPa were obtained.     

磷石膏提质降杂实验研究

磷石膏的综合利用对保护环境、促进企业可持续健康发展具有重要意义,但是磷石膏中的磷、氟、二氧化硅等杂质影响其利用。针对云南磷石膏中二氧化硅含量高的问题,采用正浮选工艺开展了磷石膏提质降杂的实验研究。通过单因素条件实验获得了合适的工艺参数：浮选温度为15 ℃、矿浆pH为2、十二胺用量为300 g/t。在此条件下,进行了“一粗二精”的正浮选开路流程实验,获得了二水石膏（CaSO₄·2H₂O）质量分数为97.5%、二氧化硅质量分数为1.17%的精矿,所得精矿达到了GB/T 23456—2018《磷石膏》一级品指标的要求;二水石膏回收率为98.58%、二氧化硅去除率为92.23%。通过正浮选不仅成功实现了二水石膏和二氧化硅的有效分离,而且磷石膏中的水溶磷和水溶氟也得到了有效去除,从而提高了磷石膏的品质。