阵列式多针-柱电极装置实现离子风的实验与分析

为了实现一定气体流速的离子风,设计了一种新型的阵列式三排3 ×3垂直放置的针-柱电极结构放电装置.在针-柱之间间距为3mm、排与排之间间距为8 mm、镇流电阻12 MΩ、放电电阻12 MΩ、测试电阻1 kΩ、大气压环境、室温、无外部通入气流时,阵列式针-柱电极实现了稳定的电晕放电,并通过示波器记录的放电波形、数码相机拍摄的发光图像以及放电伏安特性曲线进行了验证.同时,随着阵列式排数的增加,放电电流变大,离子风风速也随之增大.该针-柱结构易于用MEMS工艺加工制作,可应用于便携式分析仪器中.     

高压脉冲放电等离子体降解苯酚废水

考察了多种因素对高压脉冲放电低温等离子体降解水中苯酚效果的影响。降低放电电极直径、放电距离、废水的电导率和提高废水的pH值以及向废水中通气体和加入硫酸亚铁等均可提高废水中苯酚的降解速率 ,而加入碳酸钠则会降低苯酚的降解速率。初始质量浓度为 10 0mg/L的苯酚废水经放电处理 180min后降解率达 5 0 9%。     

煤化工专用黑水阀阀座流通性能研究

介绍了一种煤化工专用黑水阀的结构构成,并提出进行该型号阀门流通性能研究的重要性。建立流道三维模型,应用CFD有限元分析软件,模拟黑水阀内部流场分布情况,分析可视化结果,确定阀座/阀芯易损位置。分别对不同阀座渐扩角时模型进行仿真模拟,得到阀门进、出口压力值,并依此计算Cv值大小,拟合流量系数曲线,提出阀门在实现最大介质流通时阀座渐扩角范围,为阀门设计提供重要的理论参考。     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

中压汽包法兰断裂失效原因分析及改进措施

本文针对中压汽包法兰断裂失效原因进行分析，指出汽包上两个法兰同时断裂的原因在于安全阀排汽管路设计上的失误，并提出对安全阀排汽系统的改进措施。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

考虑边界反射的河流离岸排放污染混合区计算方法

在等强度点源离岸排放条件下,从简化二维移流扩散方程的解析解出发,探讨了考虑两岸反射作用的中宽河流污染混合区的计算方法。给出了污染混合区边界形状曲线与量纲一方程的形式;采用迭代计算和试算比较法,给出了靠岸与离岸两种类型混合区各几何特征参数(坐标)、面积及面积系数与相对离岸距离的关系曲线,提出了以相对离岸距离a'作为判据的排放类型分区条件。给出了河流岸边、离岸与中心排放的分类判别准则:(1)当0≤a'≤a'1时,简化为岸边(近岸)排放类型;(2)当a'1a'a'2时,称为离岸排放类型;(3)当a'2≤a'≤0.5时,简化为中心排放类型,并给出了岸边排放类型与离岸排放类型的临界相对离岸距离a'1和中心排放类型与离岸排放类型的临界相对离岸距离a'2的表达式。通过回归分析,给出了中宽河流离岸排放类型混合区主要特征参数的实用计算公式,可作为中宽河流污染混合区范围计算和排污口位置优化设计的依据。     

基于泄洪移民区域分汊河道泄流相互影响的模型试验研究

基于政府的组织行为、政府的协调行为和政府的监督行为与行洪移民区域后期扶持的具体工作的研究,治淮工程移民安置方案产生31.2亿元的投资。移民区域的大小与安全行洪区范围直接相关,分汊河道行洪的最佳分流比决定了行洪的安全与否。为了探讨复杂并联泄洪河道中不同的闸门控制对泄流的影响,论文结合淮河入江水道归江控制段模型试验,对复杂分汊并联河道的分流比及其流态对河道的稳定等进行了分析研究。通过对所采集的水位流量资料进行理论分析,按照不同的闸门开度组合,结合水面流态,系统分析入江水道中下段分汊并联河道在不同的流量下最优闸门开度组合及支汊分流比。单闸控制,主汊河道闸门开度一定时,分流比随着总泄流量增加而减小,两支汊河道分流比基本相同,且随总泄流量增加而增加。双闸控制,主汊河道和支汊河道闸门组合调节时,主汊分流比同单闸控制,支汊分流比变化量来自主汊,不影响其他支汊河道分流比。最优闸门开度为主汊单闸控制2/3开度,最优分流比为76%、12%、12%,在此分流比下行洪,将保持移民后期区域不扩大或缩小。     

Immobilization of biologically active species on PA‐6 foils treated by a dielectric barrier discharge

In the field of biomaterials and biomedical devices, surface activation has been focused on creating functional groups capable of preferential adsorption of biologically active species (proteins, enzymes, cells, drugs, etc.). In this way an interface can be created between the synthetic material and the biological medium, with the aim of increasing the compatibility of the implant with the human organism. In our experiments a dielectric barrier discharge (DBD), in helium at atmospheric pressure, was used as the source of energy capable of creating active centers that render the functionalized surface favorable to immobilization of biological molecules. Retention of immunoglobulin (IgG) and heparin biomolecules on polyamide‐6 (PA‐6) surfaces after treatment by the DBD was analyzed by atomic force microscopy, adhesion evaluation, and measurement of the contact angle titration in order to assess this incorporation on the treated surfaces. The marked adsorption of the biomolecules on the active sites created by DBD on the exposed surfaces also was related to a complex set of processes, such as enhanced roughness, increased surface wettability, and modified distribution of cationic and anionic groups on the treated surfaces. All these factors could promote interfacial interactions between the specific groups of the biomolecules existing in the biological medium and the type of cationic and/or anionic groups present on the surface. The efficiency of the DBD treatment showed that the DBD technique is useful for preactivation of the polymer surface for immobilization of other biologically active species (such as drugs and enzymes). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1985–1990, 2003