动态矩阵控制系统稳定域的根轨迹分析

本文使用根轨迹技术从理论上分析了纯滞后工业过程参数变化对系统稳定性的影响,得到了一个与设计参数有关的稳定域,从而为设计参数自动整定提供了参考。     

Integrated distributed intelligent system for process-control system design

In process-control system design, the Computer Aided Design (CAD) techniques have evolved a new generation of design techniques. This also paves the way for implementing Computer Integrated Manufacturing Systems (CIMS). However, the key issue to accomplishing the objectives in CAD is the automation of conceptual design. This paper first introduces the fundamentals of conceptual design for process-control system design. Then, a strategy to solve the problems in conceptual design is proposed. The associated system configuration and software implementation platform for developing intelligent systems for process control system design are presented. Finally, an application case is studied.     

调节对象参数和运动特性随工况变化的分析

水轮机调节对象的许多参数都是随运行工况变化的。以调节对象线性化模型为基础，从1个实例计算人手，计算了不同工况下水轮机传递系数和发电机6个参数的变化情况，进而计算这些参数变化对捌节对象特征根的影响。通过汁算表明，其水力振荡衰减速度与出力有关．而系统的其他运动特性随工况变化较小。     

基于NURBS的PDE曲面构造法研究及应用

由非均匀有理Ｂ样条曲线曲面给定边界条件，用偏微分方程来构造曲面，以参数“ａ”控制其整体形状，本文分析其思路原理及过程，并列举了在ＣＡＤ上的应用，最后分析了优缺点。     

34CrMoV结构钢动态再结晶行为研究

应用Gleeble-1500热模拟实验机进行等温压缩试验,研究了变形工艺参数对34CrMoV结构钢动态再结晶行为的影响.结果表明,其流变应力随变形温度升高而降低,随应变速率提高而增大;随着应变速率的降低,应变量的增加和变形温度的升高,动态再结晶速度加快且奥氏体晶粒得到细化.     

基于模糊匹配的平面连杆机构反求设计研究

对平面连杆机构曲线进行了分析,提出了用一组特征参数来描述连杆曲线,建立了连杆曲线图谱库,并将模糊论应用于连杆机构的曲线匹配,从而获取所求的机构参数.最后给出了应用实例,证实了该方法的可行性与有效性.     

Nonlinear black-box modeling in system identification: a unified overview

A nonlinear black-box structure for a dynamical system is a model structure that is prepared to describe virtually any nonlinear dynamics. There has been considerable recent interest in this area, with structures based on neural networks, radial basis networks, wavelet networks and hinging hyperplanes, as well as wavelet-transform-based methods and models based on fuzzy sets and fuzzy rules. This paper describes all these approaches in a common framework, from a user's perspective. It focuses on what are the common features in the different approaches, the choices that have to be made and what considerations are relevant for a successful system-identification application of these techniques. It is pointed out that the nonlinear structures can be seen as a concatenation of a mapping form observed data to a regression vector and a nonlinear mapping from the regressor space to the output space. These mappings are discussed separately. The latter mapping is usually formed as a basis function expansion. The basis functions are typically formed from one simple scalar function, which is modified in terms of scale and location. The expansion from the scalar argument to the regressor space is achieved by a radial- or a ridge-type approach. Basic techniques for estimating the parameters in the structures are criterion minimization, as well as two-step procedures, where first the relevant basis functions are determined, using data, and then a linear least-squares step to determine the coordinates of the function approximation. A particular problem is to deal with the large number of potentially necessary parameters. This is handled by making the number of ‘used’ parameters considerably less than the number of ‘offered’ parameters, by regularization, shrinking, pruning or regressor selection.     

圆柱形螺旋弹簧的简捷计算

将圆柱形螺旋弹簧设计中的部分常用公式组合成一组仅与弹簧指数Ｃ有关的公式，并将Ｃ＝４～１４代入计算而获得一套参数表，由此，可提高圆柱形螺旋弹簧的设计效率。     

Parameter estimation using a sensor array in a Ricean fading channel

The estimation of the Direction-Of-Arrival (DOA) and the variance of the angular spread, using an array of sensors in the case of a Ricean channel is considered, using the Maximum-Likelihood, Least-Squares and Weighted Least Squares criteria. The Cramér-Rao bound is also obtained for the problem of interest. Simplification of the cost functions to reduce the dimension of the problem has been carried out and the performance of the methods has been studied based on numerical experiments. A major part of the work was carried out when K V S Hari was visiting the Department of Signals, Sensors and Systems during Jul–Sep 1995, on leave from the Indian Institute of Science     

InGaAsP／InP PFBH激光器

采用Ｎ－ＩｎＰ衬底研制ＩｎＧａＡｓＰ／ＩｎＰ激光器和ＤＦＢ激光器在国内已报导过多次，本文介绍用Ｐ－ＩｎＰ衬底研制ＩｎＧａＡｓＰ／ＩｎＰ平面埋层异质结构激光器和ＤＦＢ－ＰＦＢＨ激光器，同时利用晶体生长和晶向的依赖关系，改进埋区的结构，使器件最高激射温度大于１００℃。