Dynamics of Vibroprotective Systems with Roller Dampers of Low-Frequency Vibrations

We study low-frequency vibrations of a vibroprotective system of solid bodies formed by a roller damper and a moving load-carrying body under the action of external harmonic excitations. The dynamic equations of combined motion of the working body of the damper over the hinged roller without sliding and the load-carrying body are deduced and numerically analyzed. A new procedure is proposed for the evaluation of the optimal parameters of adjustment of roller dampers in nonlinear systems.     

The effect of aluminium coating on elemental standards in X-ray microanalysis

The standardisation of frozen hydrated bulk biological specimens using gelatin standards is described. The relationship between corrected elemental X-ray counts and ionic concentration was found to be linear, and minimum detectable limits for each element are stated. Variations in uncorrected standard curves were found to be due to changes in aluminium coating thickness. There was an inverse relationship between coating thickness and elemental X-ray counts. The factors causing this are discussed. To avoid errors arising from inconsistent aluminium thickness, experimental material should only be compared with standards of similar aluminium net counts. This can be achieved most easily by mounting and analysing specimen and standard together.     

预测油气田产量的β模型

通过对油气田产量变化规律进行系统研究，推导建立了预测油气田产量的β模型。该模型不但可以预测油气田产量、累积产量随生产时间的变化，而且可以预测可采储量、最高年产量及其发生的时间。实例检验该模型是可信的。     

A new FMS architecture based upon networked DSP servo technology

This paper presents a critical evaluation of existing FMS architectures and the academic and industrial design and development strategies used during their formulation. The paper seeks to address the need for, and value of, existing architectures within the industrial arena. More importantly however, this paper puts forward a new two-tier distributed control architecture for FMS based upon new (real-time) networkable DSP servo control methodologies developed by one of the authors for Softronics in Australia. The ramifications of these methodologies are substantial, not only in terms of FMS control, but in the overall simplification of such systems and the development of flexible fixturing devices over the coming decade. This paper also postulates on how new FMS architectures can be developed from such technologies and details why such architectures could be more appropriate to industry needs than those that are currently in existence.     

智能工程与控制技术：历史,发展与未来

本文综述了智能工程和控制技术的发展历程和基本问题。文中着重论述了人工智能在过程控制系统中的必要性及开发实时智能控制系统的步骤；对符号推理系统、耦合推理系统、人工神经网络和集成分布式智能系统的特点和局限进行了比较。最后讨论了计算机集成过程系统（ＣＩＰＳ）的基本问题、基础技术和发展前景。     

Distributed memory systems for simulating artificial neural networks

In executing tasks involving intelligent information processing, the human brain performs better than the digital computer. The human brain derives its power from a large number [O(10¹¹)] of neurons which are interconnected by a dense interconnection network [O(10⁵) connections per neuron]. Artificial neural network (ANN) paradigms adopt the structure of the brain to try to emulate the intelligent information processing methods of the brain. ANN techniques are being employed to solve problems in areas such as pattern recognition, and robotic processing. Simulation of ANNs involves implementation of large number of neurons and a massive interconnection network. In this paper, we discuss various simulation models of ANNs and their implementation on distributed memory systems. Our investigations reveal that communication-efficient networks of distributed memory systems perform better than other topologies in implementing ANNs.     

节理岩体参数对围岩破损区影响的敏感性分析

本文针对黄河拉西瓦地下水电站工程，对节理岩体诸参数对围岩破损区范围的影响进行了敏感性分析。指出了主要敏感参数，对这些参数影响围岩破损区的趋势和可能程度进行了讨论，并对勘察和施工提出了一些意见。     

搅拌工艺对半固态Y112铝合金组织及性能的影响

采用自行研制的机械搅拌装置,研究了不同工艺参数对半固态Y112铝合金组织及性能的影响.研究表明,搅拌温度越高,搅拌速度越大,固相颗粒越细小、均匀和圆整,其抗拉强度与伸长率越高;但温度太高,固相颗粒会熔化,抗拉强度及伸长率也降低;随搅拌时间的延长,固相颗粒先变得细小、均匀和圆整,然后长大,抗拉强度、伸长率先升高后降低.     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

可见光共振腔发光二极管的研究进展

共振腔发光二极管是一种具有优良发光性能的光电器件。概述了对可见光共振腔发光二极管的共振腔结构、反射镜材料体系、基本工作机理和发光特性，并展望了这种器件的发展前景。