Investigation on interior moisture distribution inducing dielectric anisotropy of coals

Dielectric anisotropy phenomenon of coal was detectable by many dielectric measurements. The paper presented that it was attributed to coal interior moisture distribution. A new model describing interior moisture distribution was developed basing on microstructure observation of coal. In the model, coal interior moisture distribution was analyzed and simulated numerically, the relationship between interior moisture distribution and coal dielectric property was constructed, the character of the permittivity varying with moisture content had also been studied and coal dielectric anisotropy was deduced. Corresponding experiment results were well satisfied with the model analysis, demonstrating that the interior moisture content could cause coal dielectric anisotropy.     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

A survey on approaches to gridification

The Grid shows itself as a globally distributed computing environment, in which hardware and software resources are virtualized to transparently provide applications with vast capabilities. Just like the electrical power grid, the Grid aims at offering a powerful yet easy‐to‐use computing infrastructure to which applications can be easily ‘plugged’ and efficiently executed. Unfortunately, it is still very difficult to Grid‐enable applications, since current tools force users to take into account many details when adapting applications to run on the Grid. In this paper, we survey some of the recent efforts in providing tools for easy gridification of applications and propose several taxonomies to identify approaches followed in the materialization of such tools. We conclude this paper by describing common features among the proposed approaches, and by pointing out open issues and future directions in the research and development of gridification methods. Copyright © 2007 John Wiley & Sons, Ltd.     

Personal Exposure in Displacement Ventilated Rooms

Personal exposure in a displacement ventilated room is examined. The stratified flow and the considerable concentration gradients necessitate an improvement of the widely used fully mixing compartmental approach. The exposure of a seated and a standing person in proportion to the stratification height is examined by means of full-scale measurements. A breathing thermal manikin is used to simulate a person. It is found that the flow in the boundary layer around a person is able to a great extent to entrain and transport air from below the breathing zone. In the case of non-passive, heated contaminant sources, this entrainment improves the indoor air quality. Measurements of exposure due to a passive contaminant source show a significant dependence on the flow field as well as on the contaminant source location. Poor system performance is found in the case of a passive contaminant released in the lower part of the room close to the occupant. A personal exposure model for displacement ventilated rooms is proposed. The model takes the influence of gradients and the human thermal boundary layer into account. Two new quantities describing the interaction between a person and the ventilation are defined.     

Mechanics of sintering materials with bimodal pore distribution. III. Kinetics of sintering combined with various forms of loading and adhesion conditions

A study has been made on the effects of loading scheme and conditions restricting macroscopic strain on the work-hardening kinetics and strain accumulation in the solid state in sintering materials with bimodal pore size distributions. Active loading intensifies the reduction in the small pores. The greatest effect comes from combining sintering with hydrostatic compression. At the same time, kinematic constraints (partial or complete adhesion in surfaces) substantially retards the shrinkage of large pores, which means that the porous structure can be controlled. __________ Translated from Poroshkovaya Metallurgiya, Nos. 5–6(449), pp. 10–15, May–June, 2006.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

人群头发元素分布及某些特征研究

本文介绍用堆中子活化分析法测定人群头发中I、Br、Mg、Mn、Cu、Na、V、Cl、Al、Ca、S等11种元素。研究人发中元素分布特征、相关性特征、性别年令分布特征。方法学中还从法庭科学应用角度介绍同一性识别中差异率和重合几率的双判据方法。     

AXIAL PHASES DISTRIBUTION AND HOMOGENIZATION IN THREE-PHASE FLUIDIZED BEDS

We have investigated the axial distribution of the liquid phase in a three-phase fluidized bed in which the particles were glass beads of two different diameters, 710-850 μm and 2 mm. Two methods were used to reduce the axial heterogeneity and homogenize the bed: the use of packing elements and the addition of a small quantity of a high molecular weight polymer. The use of packing elements was shown to be very efficient in controlling phases distribution in the bed. The packing consisted of 1 mm thick steel horizontal plates punched and stretched to obtain parallelogram-shaped openings. The addition of a high molecular weight polyisobutylene (BASF Oppanol B246, M_u, =6.15 Lo⁶) on the phase distribution was also studied. Low polymer concentrations up to 397 ppm (based on the liquid phase) were investigated. The addition of the polymer reduced bubble coalescence and allowed for a better distribution of the phases.