Differentiation between epigeic and hypogeic fauna in gravel streams

The ‘hyporheic zone’ is described. According to the classical definition, water below the sediment surface is groundwater and the hyporheic interstitial zone is part of the phreatic system. This ignores the vertical distribution of the epigeic benthic fauna. The uppermost layer of the sediment (bed sediments) of the hyporheic zone is dominated by epigeic faunal elements and is therefore part of the surface system. In contrast to hypogeic species, the depth penetration of epigeic species is limited. Possible explanations are discussed.     

Influence of heat transfer on anodic oxidation of aluminium

The influence of convective heat transfer on constant current density anodizing of aluminium in sulfuric acid has been examined in a wall-jet electrode reactor. The uniformity of the anodic film thickness is related to the local electrode temperature distribution, which is dependent on the convection. The higher the local temperature, the greater the local oxide thickness. An increased local temperature enhances local field assisted oxide dissolution at the pore bases, and consequently acts to increase the local current density. At relatively high current densities, local features develop on the electrode surface, accompanied by high initial, local temperature rises. The relevance of such local features, limiting useful oxide growth, is considered further.     

太阳能热风发电技术研究进展

介绍了太阳能热风发电的产生背景、技术原理和特点。太阳能热风发电能够实现由太阳能到空气动能,最终到电能的转变,具有环保无污染、运行维护简单、缓解常规能源消耗等特点。简要介绍世界上第1座试验性质的太阳能热风发电站。对太阳能热风发电技术相关研究历程从试验研究和理论研究2个方面做了综述,重点介绍了澳大利亚电站的建设进展及最新相关学术研究进展,包括过渡段理论及试验研究、系统数值模拟和太阳能热风发电技术在高山地区的应用等。介绍我国太阳能资源情况,指出我国太阳能资源丰富,适合建造大型太阳能热风发电站。     

用于频率合成器的低损耗声表面波滤波器

简述了产生声表面波滤波器插入损耗的主要机理和获得低损耗的原则；介绍了根据此原则对１００～５００ＭＨｚ５种滤波器的研制过程和结果。实验表明，采用镜像阻抗连接换能器结构可达到３～４ｄＢ的低损耗，并成功地应用于频率合成器中。     

Techniques for estimating test length under random test

When a circuit is tested using random or pseudorandom patterns, it is essential to determine the amount of time (test length) required to test it adequately. We present a methodology for predicting different statistics of random pattern test length. While earlier methods allowed estimation only of upper bounds of test length and only for exhaustive fault coverage, the technique presented here is capable of providing estimates of all statistics of interest (including expected value and variance) for all coverage specifications.Our methodology is based on sampling models developed for fault coverage estimation [1]. Test length is viewed as awaiting time on fault coverage. Based on this relation we derive the distribution of test length as a function of fault coverage. Methods of approximating expected value and variance of test length are presented. Accuracy of these approximations can be controlled by the user. A practical technique for predicting expected test length is developed. This technique is based on clustering faults into equal detectability subsets. A simple and effective algorithm for fault clustering is also presented. The sampling model is applied to each cluster independently and the results are then aggregated to yield test lengths for the whole circuit. Results of experiments with several circuits (both ISCAS '85 benchmarks and other practical circuits) are also provided.This work was done while the author was with the Department of Electrical Engineering, Southern Illinois University, Carbondale, IL 62901.     

轴对称问题线元上分布奇点的诱导速度势和诱导速度

本文给出轴对称问题线元上高次分布源和偶极在无界域中的诱导速度势和诱导速度的计算公式,可供用分布奇点法求解轴对称势流问题时参考.     

Determination and Health Implication of the Erucic Acid Content of Broccoli Florets, Sprouts, and Seeds

The erucic acid content of broccoli florets, sprouts, and seeds was found to be about 0.8, 320, and 12100 mg/100 g, respectively. Using the erucic acid limit established for canola oil in the U.S.A. and Canada as a guideline, the estimated dietary intake of erucic acid from florets and sprouts was considered of little consequence, whereas in seeds a relatively small amount (about 35 g/wk) equaled our calculated exposure limit for erucic acid. Additionally, the most complete fatty acid distribution yet published for the various forms of broccoli are presented.     

储层横向相变对剩余油分布的影响

处在构造边部、低部位的商５－５井，在改注水井排液中发现不含水的高产这种非常规现象，由此引起对地质因素的分析。浅湖相沉积的主体是滩砂微相，它可细分为“滩脊”和“滩侧”，其中“滩脊”砂体的泥质含量低，孔隙度、渗透率都较高，而“滩侧”则泥质含量高，物性差。在从“滩脊”砂体向“滩侧”过渡时，极易形成类似于砂体尖灭的岩性封堵，造成剩余油富集，而“滩脊”不一定就在构造的高部位。陆相沉积的砂体非均质性很强，孔隙度和渗透率在横向上的变化很大，高部位的油层水淹，低部位的油层不一定就高含水，这是因为砂体横向上的非均质性，使同一时间单元沉积的砂体很可能不连通。基于这些分析，地质工作者不妨运用沉积微相的原理在构造的低部位或边部寻找剩余油富集区，商５－５井的现实给了我们很好的启示。     

Reliability‐based estimation of the survival of Listeria monocytogenes in chorizos

Reliability analysis is especially important when critical decisions are to be made involving potentially severe adverse consequences such as foodborne illness. Owing to uncertainty associated with the parameters controlling survival of Listeria monocytogenes in chorizo (a Mexican‐style sausage), the time needed to reduce the count by a certain number (n) of logs (t_nD) is probabilistic. In this paper the first‐order second‐moment (FOSM) method based on Taylor series expansion is used to derive the expected value and standard deviation of t_nD as function of the operating conditions (random variables) affecting survival, namely initial water activity (a_w0) of the sausage batter, storage temperature (T) and airflow velocity (F), along with their uncertainties characterised by their means and coefficients of variation. For any given n the derived t_nD probability distribution enables one to determine an estimate of t_nD for any desired level of reliability or confidence level, such as 50% (median value), 95%, 99%, etc. Among the conclusions drawn were: (i) the variability associated with T and F has a minor effect on estimating uncertainty in t_nD, whereas the reliability of t_nD estimation is greatly influenced by the uncertainty in a_w0; and (ii) the uncertainty in a_w0 has the greatest impact when a_w0 of the sausage formulation exceeds 0.90. The approach used and discussed in this paper can be applied to any survival/inactivation study to incorporate the effect of uncertainty in the various extrinsic and intrinsic parameters on the survival kinetics of the pathogen in a food system under evaluation. Copyright © 2006 Society of Chemical Industry     

高层印制线路板正面临的对位挑战

封装工业正在推动着印制线路板技术水平朝着半导体要求的方向发展。高密度印制线路板正广泛用于网络路由器、自动测试设备和服务器领域。高密度要求(>150 IO/cm~2)正成为客户的普通需求。为满足现有的高密度封装要求,由于线宽、线距和通孔孔径正接近传统制作极限,普遍的方法就是不断增加印制线路板的层数。这些特征正驱动着印制线路板在基材、图像转移、蚀刻、电镀、阻焊、测试流程和对位系统的变化。此文主要讲述了印制线路板特性的变化趋势和利用对位模式和雷利分布去预测满足高级对位要求的能力以及印制线路板各流程中有关对准度的控制要点。