起重机监控器双机协同中CAN总线的应用

为了满足工程建设日益大型化的发展,两台以及多台起重机共同作业的需求日益增强。设定了起重机双机协同模型,使用飞思忙尔MC9S12DGl28单片机以实现起重机监控器的双机协同功能,设计了CAN总线节点模块来实现双机的数据采集、状态检测和故障处理等功能,给出了实现双机协同的硬件设计和软件流程图。系统在实际运行过程中稳定、可靠,能保证起重机在双机协同时做到步调一致,并很好地应对故障的发生,同时表明CAN总线在起重机工作环境中能够很好地发挥自身通讯距离长、抗干扰能力强等优势,符合了双机协同的功能要求。     

卧螺离心机变频调速PLC控制系统设计

针对传统的卧螺离心机控制系统存在稳定性差、工作效率低的问题,设计了一种卧螺离心机变频调速PLC控制系统;详细介绍了该系统中共直流母线变频调速系统、副电机随动方案及负载率调整方法、PLC控制系统、组态界面的设计。实际应用表明,该系统运行稳定,提高了离心机的性能。     

Automated synthesis of multiple analog circuits using evolutionary computation for redundancy-based fault-tolerance

Analog circuits are one of the most important parts of modern electronic systems and the failure of electronic hardware presents a critical threat to the completion of modern aircraft, spacecraft, and robot missions. Compared to digital circuits, designing fault-tolerant analog circuits is a difficult and knowledge-intensive task. A simple but powerful method for robustness is a redundancy approach to use multiple circuits instead of single one. For example, if component failures occur, other redundant components can replace the functions of broken parts and the system can still work. However, there are several research issues to make the redundant system automatically. In this paper, we used evolutionary computation to generate multiple analog circuits automatically and then we combined the solutions to generate robust outputs. Evolutionary computation is a natural way to produce multiple redundant solutions because it is a population-based search. Experimental results on the evolution of the low-pass, high-pass and band-stop filters show that the combination of multiple evolved analog circuits produces results that are more robust than those of the best single circuit.     

Majority gates vs. general weighted threshold gates

In this paper we study small depth circuits that contain threshold gates (with or without weights) and parity gates. All circuits we consider are of polynomial size. We prove several results which complete the work on characterizing possible inclusions between many classes defined by small depth circuits. These results are the following:

热卷箱是提高热连轧线竞争能力的最佳选择

介绍了热卷箱技术的发展及在我国的应用情况。结合“双工位无芯卷取”热卷箱技术在宝钢集团梅山钢铁公司1422mm热轧厂的成功应用，重点介绍了该技术的特点及在解决热轧板带中节能减排、减少氧化铁皮、避免甩尾、稳定精轧轧制及开发高附加值产品等方面的优势；认为其是提高热轧板厂竞争力的最佳选择。     

基于演化算法的奇偶校验器自动设计*

基于演化算法技术,提出一种新的设计思想,实现奇偶校验器的电路自动设计.实验证明,多目标演化算法具有较少的运算量和较高的效率,能自动设计出使用逻辑门数更少、延时更小的奇偶校验器.     

Photocatalytic syngas synthesis from CO2 and H2O using ultrafine CeO2-decorated layered double hydroxide nanosheets under visible-light up to 600 nm

The rational design of photocatalyst that can effectively reduce CO₂ under visible light(l>400 nm),and simultaneously precise control of the products syngas(CO/H2)ratio is highly desirable for the Fischer-Tropsch reaction.In this work,we synthesized a series of CeO₂-decorated layered double hydroxides(LDHs,Ce-x)samples for photocatalytic CO₂ reduction.It was found that the selectivity and productivity of CO and H₂ from photoreduction of CO₂ in conjunction with Ru-complex as photosensitizer performed an obvious“volcano-like”trend,with the highest point at Ce-0.15 and the CO/H₂ ratio can be widely tunable from 1/7.7 to 1/1.3.Furthermore,compared with LDH,Ce-0.15 also drove photocatalytic CO₂ to syngas under 600 nm irradiation.It implied that an optimum amount of CeO₂ modifying LDH promoted the photoreduction of CO₂ to syngas.This report gives the way to fully utilize the rare earth elements and provides a promising route to enhance the photo-response ability and charge injection efficiency of LDH-based photocatalysts in the synthesis of syngas with a tunable ratio under visible light irradiation.     

带材的纠偏控制

本文对带钢生产线上常见的带材跑偏现象，进行了详细的分析。对带钢跑偏的原因，进行了研究。同时，对带钢跑偏应采取的措施，也给出了相应的方法。     

复吹转炉“留渣 双渣”脱磷工艺试验

摘要：在国内某转炉钢厂采用“留渣 双渣”工艺技术进行脱磷工艺试验。结果表明：随着转炉前期脱磷率不断升高,终点脱磷率不断提高。铁水硅含量对前期脱磷率的影响最大。根据铁水成分,在冶炼前期适当降低供氧强度、降低气固氧比、加入适量石灰及烧结矿,均有利于前期脱磷率的提高。在一倒时每吨钢液加入4~8kg石灰,不影响出钢温度,可提高一倒-终点阶段脱磷率,同时可提高终点脱磷率。从终点的控制效果可知,终点炉渣碱度应保持不小于3.0,炉渣中FeO质量分数在16%~20%,并适当降低终点出钢温度在1610~1630℃,有利于终点脱磷率的提高。通过加强熔池搅拌,促进钢渣反应趋于平衡,有利于终点磷分配比提高,从而可进一步提高终点脱磷率。     

双滑移取向Cu单晶的循环形变行为──Ⅱ．滑移带和形变带SCIEI

用光学显微镜和扫描电镜研究了双滑移取向（［０３４］，［１１７］）Ｃｕ单晶循环饱和后的表面形貌，塑性分切应变幅（γｐｌ）低于１０^（－３）时，［０３４］晶体表面上要为主滑移系的驻留滑移带（ＰＳＢｓ）占据，次滑移只在边缘区域启动，其ＰＳＢｓ细窄（＜１μｍ），体积百分数在１％以下．γｐｌ＞１０^（－３）时，次滑移开始在试样的中部启动，同时，表面出现二种贯穿晶体的宏观形变带（ＤＢＩ，ＤＢＩＩ），滑移带在形变带内集中．［１１７］晶体在γｐｌ＝４．４×１０^（－４）时，双滑移现象已十分明显．γｐｌ＞１０^（－３）时，表面也形成与前者相似的形变带．ＤＢＩ的惯习面与主滑移面平行（［０３４］晶体）或接近（［１１７］晶体），ＤＢＩＩ的惯习面则与前者垂直，文章讨论了形变带形成的可能原因．