Dependence of dielectric properties on BT particle size in EP/BT composites

The polymer-ceramic composites of epoxy resin (EP) and barium titanate (BT) were prepared.BT powders of different BT particle sizes from 100 nm to 1 μm were used in the preparation.The dielectric properties, such as dielectric constant, dielectric loss and electrical breakdown strength, of the EP/BT composites were studied.The morphology of the composites was characterized by the means of scanning electron microscopy (SEM).The results show that the dielectric constant of the composites is much higher than the epoxy matrix at frequency range from 1 kHz to 10 MHz, and it is also obviously dependent on the size of BT particles.The electrical breakdown strength of the composites decreases with the increase of the BT content.The dependence of electrical breakdown strength on BT particle sizes was also discussed.     

数字信号处理器DSP主控GMAW焊接

阐述了焊接过程信息数字处理控制思想，实际研究了数字信号处理器9DSP）在CO2气体保护焊机中的应用，将数字信号处理器（DSP）在送丝系统的柔性化调节，引弧和收弧模式，焊接参数的一元化自调节等方面的应用作了研究和试验，通过研究和样机试验，建立了一套焊接电源的数字化，信息化，柔性化控制平台，并探讨了数字信号处理器（DSP）在CO2焊接领域中的应用优点和前景，并提出了DSP主控GMAW焊接电源全系统框图，试验证明该系统工作稳定可靠，较好地满足了工艺性能，实现了焊机控制的数字化。     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

C/S模式PDM在网络分布式环境下集成应用研究

通过分析企业信息化网络应用过程中PDM系统所面临的网络集成问题,提出了一种基于C/S模式开发的PDM系统转化为网络分布式集成应用的解决方案,并利用中间件技术研制了实现企业应用集成的网络集成平台。基于此平台运行的各应用模块不仅可以相互间实现紧密集成,并能够基于平台资源定向功能实现应用的网络分布和W eb化访问,且对国产数据库应用提供专门支持。     

基于遗传算法的图像恢复研究

通过对遗传算法和图像恢复理论的分析，提出了基于遗传算法的图像恢复方式。该方式具有优化、收敛性快等优点。     

00Cr17Ni14Mo2不锈钢的性能及应用研究

研究了00Crl7Nil4M02不锈钢材料的机械性能、焊接性能和耐腐蚀性能，从用户和研究开发的角度探讨了其在压力容器、化工装置、化肥装置、海洋装置和建筑业等领域的应用。     

电感电容损耗电阻的讨论

通过对电容电感阻抗的测量，发现实验值偏离理论值。定性地分析了误差的来源，得出的结论是电感电容内部的损耗电阻随着频率的变化而变化，变化方向相反而并非相同。     

搅拌摩擦加工(FSP)AZ91D镁合金的组织分析

研究了AZ91D镁合金经搅拌摩擦加工后的组织。发现组织中搅拌摩擦区、热机械影响区和热影响区分区不明显。在搅拌摩擦区主要为再结晶形成的细小均匀的等轴晶结构,共晶组织α-Mg β相(Mg17Al12)完全均匀化,仅在晶界处有少量存在。     

Ti-25V-15Cr-2Al-2Mo-0.2C阻燃β钛合金的蠕变变形结构研究

采用TEM技术研究了具有不同热处理组织的Ti-25V-15Cr-2A1-2Mo-0．2C合金存在540℃，250MPa，100h蠕变作用后的变形结构。结果表明：位错环组是合金蠕变变形结构中的典型位错组态；合金的蠕变抗力随β基本上弥散分布的第二相析出数量的增加而提高。添加微量能提高蠕变抗力的合金元素，如Si元素等，是改善合金蠕变性能的可行途径。