Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

动态光散射法研究海藻酸钠凝胶松弛行为

在前文的基础上，用相关函数轮廓分析的方法剖析了运动模型模式的复杂性。通过海藻酸钠水溶液在０．１ｍｏｌ／ＬＣａＣｌ２水溶液透析凝胶化过程中交联网络的松弛时间谱表明它不是单一的峰，有两上特征运动模式，并随透析向更慢的运动模式发展，这很慢的运动模式估计与区域的结构的生成有关。     

热释电系数的测量方法

描述热释电系数的两种测量方法。其一为电荷积分法，测试系统简单，测量数据准确，且能满足零电场条件下的测量。其二为动态电流法，采用调制热源技术，研究在特定温度条件下热释电材料的动态热释电响应。     

风机叶轮的现场平衡方法

介绍了利用简单方法，解决风机叶轮现场静、动平衡的问题。方法快速、准确、实用。     

方波信号在音频技术中的应用

本文重点介绍了方波依赖在音频测量，设备的维护检测及录音均衡自动调节等音频技术中的应用，并通过对方波信号的频谱特性和方波信号通过线性系统的频域特性的分析，简要说明了方波信号在应用电路中的基本工作原理。     

家电产品常用板材的选用

本文首先介绍国内和日本、德国、俄罗斯等国冷轧薄钢板及镀锌薄钢板的牌号、标记识别及生产地及与我国家标准薄钢板牌号的相互之间的关系，并比较具体地介绍冷轧板的实效性、镀锌薄钢板的锌层特性等诸多方面的状况。从而帮助我们在设计、制造家电产品中，比较正确地选择合适的板材。     

Dynamic properties of carbon black filled chlorinated polyethylene/hindered phenol blends

Aggregates of carbon black (CB) in a polymer matrix have a tendency to form a CB network. The dynamic mechanical properties of binary systems of chlorinated polyethylene (CPE) and CB or 3,9‐bis{1,1‐dimethyl‐2[β‐(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionyloxy]ethyl}‐2,4,8,10‐tetraoxaspiro[5,5]‐undecane (AO‐80) and their ternary systems were investigated. It was found that the dynamic mechanical properties of those systems depend on the colloidal properties, surface oxides, and surface modification of CB. For binary systems of CPE and CB, oxidized CB gives a high modulus at low strain amplitude and a large Payne effect compared with untreated CB. In contrast, the reverse effect was observed for their ternary systems. Consequently, a good micro‐dispersion is obtainable by surface modification due to physical adsorption of AO‐80 on oxidized CB particles via hydrogen bonds. © 2003 Society of Chemical Industry     

非AWGN环境下调制类型自动识别

在非AWGN环境下，针对CW，AM，FM，OOK，PSK，QPSK，16QAM，FSK，MSK，SSB十种混合调制信号，对调制类型特征提取方法和自动识别算法进行了分析、综合、设计和计算机仿真。提出了梯层电平分析方法、频率瞬时信号分析、剔除载波的归一化能量分析、平方后信号的频谱分析、四次方后的信号频谱分析等方法。当SNR=10dB时，计算机仿真结果是正确识别率不低于95％，自动识别的平均处理时间为不超过10s。     

川东北三叠系飞仙关组鲕滩气藏有利储集层的形成与分布

川东北地区三叠系飞仙关组鲕滩气藏是近年四川盆地碳酸盐岩天然气勘探取得重大突破的领域，目前在中国石油探区内已发现罗家寨、渡口河、铁山坡等大中型气藏。对鲕滩气藏白云岩储集层进行岩心观察、显微薄片分析，并进行微量元素、流体包裹体、X衍射、阴极发光及电子探针等分析，结果表明，白云岩化和多期溶蚀是形成优质白云岩储集层的关键因素，混合云化与埋藏云化的叠加作用是形成孔隙性白云岩储集层的基本条件。飞仙关组鲕滩气藏储集层经历了4期溶蚀作用，即同生期溶蚀作用、浅埋期溶蚀作用、深埋期溶蚀作用和抬升期溶蚀作用，形成优质白云岩储集层的主要溶蚀作用是浅埋期和深埋期的溶蚀作用。优质白云岩储集层主要分布在台缘鲕粒滩相带，纵向与亮晶鲕粒灰岩呈韵律性互层，横向主要分布在鲕粒滩坝靠近漏湖-潮坪一侧。