论开发750 kV超高压真空断路器的必要性

简述了真空断路器的发展概况，对真空断路器与SF6断路器进行了对比分析。同时对真空断路器向750kV超高压等级发展的途径进行论述。     

钢中稀土加入工艺技术研究与应用

为解决钢中稀土加入难题，济钢开发了结晶器喂稀土金属丝工艺，即采用SLW2-4(A)多齿辊无级调速结晶器稀土喂丝机，通过严格控制原始钢水的脱氧程度，合理选择喂丝工艺参数，提高了钢中稀土成分的合格率．稀土回收率达80％以上，稀土在钢中的分布基本均匀。在09CuPTiRE和JCL355等部分钢种应用表明，稀土在钢中有净化、变质和微合金化的作用，钢中夹杂物总量评级平均只有5级，比正常生产钢降低2．2个级别以上。     

电磁泄放阀辅阀改进

通过对电磁泄放阀辅阀泄漏原因的分析，提出了相应的改进措施：(1)改进辅助阀瓣结构；(2)改动辅阀位置；(3)改变试验方法；(4)加强锅炉起动时的检查。珠江电厂3号、4号炉电磁泄放阀采取这些措施后已运行近两年，效果良好，辅阀未再泄漏，确保了机组的安全运行。     

以逐步隔离法为基础的系统泄漏率试验经济性回收分析

定性地论述了以逐步隔离法为基础的系统泄漏率试验方法的进行过程及问题处理方法,并以邹县发电厂#1机为例定量地分析由该方法进行试验所回收的经济效益。该方法的提出为电厂节能降耗指出了一个新的方向。     

一种热电阻温度测量的全补偿方法

热电阻温度测量中，热电阻的非线性、不平衡电桥的非线性及引线电阻都会给测量带来误差．本文采用铂电阻改进型实用有源线性化桥路克服了上述误差，实现了高精度的温度测量。     

客家土楼中的象征文化浅析

客家土楼以其鲜明的风格成为世界建筑艺术的一朵奇葩,其中蕴含着丰富的象征文化.试从象征的源起及在建筑中的具体体现等方面,对客家土楼中的象征文化进行诠释.通过研究其中的象征文化,有助于更完整地认识客家土楼建筑文化的全部涵义.     

An Analytical Equation of State for Alkaline Earth Metals

In this work, an analytical equation of state based on statistical mechanical perturbation theory, which was initially developed for normal fluids and can be applied to predict the P–V–T data for saturated liquid alkaline earth metals, is presented. The equation of state is that of Ihm, Song, and Mason, and the temperature-dependent parameters of the equation of state are calculated from a corresponding-states correlation as functions of the reduced temperature. Two scaling constants are sufficient for this purpose, the surface tension and the liquid density at the melting point. The equation of state is used to predict the saturated liquid density of molten alkaline earth metals from the melting point up to 2000 K, for which experimental data exist, within an accuracy of 5%.     

110kVSF_6断路器爆炸事故分析

简述一台110kVSF6断路器B相爆炸事故情况,并分析了其原因。     

新型单辊破碎机篦板在烧结中的应用

本文讨论了新型单辊破碎机篦板在烧结中的应用，介绍了该篦板的优点和应用方法。使用结果表明，此种单辊破碎机篦板使用寿命长，易于检修，经济效益显著。     

Lanthanum Containing Polymer''s Modification to PP

Polypropylene (PP)'s low impact strength limits its usages. Adding some a rare earth polymer can enhance PP's tensile strength and impact strength. Acrylic lanthanum was prepared by the reaction between lanthanum oxide and acrylic acid. The IR spectrum prove that and optimum reacting conditions are that the bulk ratio of La(AA) 3 and MMA is not less than one and temperature is about 80 ℃. Lanthanum containing Polymer were added into PP. When percent of addition only was 3%, strength were enhanced 10% , and impact strength 40%. SEM shows the compatibility of rare earth polymer and PP; lanthanum containing polymer can form physical crosslinking between PP's molecules, then every particle's surface connect with several PP molecules and the PP mechanical property were enhanced.