稀土元素对钯室温电学性能的影响

研究了稀浓度(0.6at％以下)稀土元素(La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Er、Yb)对钯的室温电学性能的影响。所有稀土元素均提高钯的电阻率(p)、降低电阻温度系数(α),实验结果与理论分析证明(p·α)_((?)d-RE)d=(p·α)_(Pd)。Gd以前的稀土元素降低钯的对铜热电势(ε),其余重稀土元素增大钯的对铜热电势。按0.1at％RE归一化处理的实验数据表明,轻稀土元素对钯电阻率的影响稍大于重稀土,但Ce、Eu、Yb呈反常影响,化合价和尺寸因素是影响电学性能的主要因素。     

Reaction process of monazite and bastnaesite mixed rare earth minerals calcined by CaO-NaCl-CaCl2

The decomposition reactions of monazite and bastnaesite mixed rare earth minerals calcined by CaO-NaCl-CaCl2 were studied by means of TG-DTA and XRD. The results show that the process of the minerals decomposed by CaO involves two steps. The first step occurs in the temperature range of 425-540 ℃, and the main reactions are bastnaesite decomposition, i.e. REOF reacts with CaO to produce RE2O3 and CaF2, and Ce2O3 is oxidized to CeO2. During this step, CaCO3 is formed at about 500 ℃. The second step takes place in the temperature range of 610-700 ℃, and the reactions are monazite decomposition into RE2O3, Ca5F（PO4）3 and Ca3（PO4）2 by CaO and CaF2. In this process, the decomposition ability is improved because CaO from CaCO3 decomposing has high chemical activity. In calcining process, the new formed Ca5F（PO4）3 restrains fluorine that can escape in form of gaseous compound. The decomposition ratio of the mixed rare earth minerals reaches 90.8% at 700 ℃.     

Photocatalytic syngas synthesis from CO2 and H2O using ultrafine CeO2-decorated layered double hydroxide nanosheets under visible-light up to 600 nm

The rational design of photocatalyst that can effectively reduce CO₂ under visible light(l>400 nm),and simultaneously precise control of the products syngas(CO/H2)ratio is highly desirable for the Fischer-Tropsch reaction.In this work,we synthesized a series of CeO₂-decorated layered double hydroxides(LDHs,Ce-x)samples for photocatalytic CO₂ reduction.It was found that the selectivity and productivity of CO and H₂ from photoreduction of CO₂ in conjunction with Ru-complex as photosensitizer performed an obvious“volcano-like”trend,with the highest point at Ce-0.15 and the CO/H₂ ratio can be widely tunable from 1/7.7 to 1/1.3.Furthermore,compared with LDH,Ce-0.15 also drove photocatalytic CO₂ to syngas under 600 nm irradiation.It implied that an optimum amount of CeO₂ modifying LDH promoted the photoreduction of CO₂ to syngas.This report gives the way to fully utilize the rare earth elements and provides a promising route to enhance the photo-response ability and charge injection efficiency of LDH-based photocatalysts in the synthesis of syngas with a tunable ratio under visible light irradiation.     

无机盐对新疆油田三元复合驱界面性能影响研究

界面性能对复合驱提高采收率有重大的影响,界面张力越低,洗油效率越高;Zeta电位越高,油水乳状液越稳定。研究了各类无机盐对新疆油田复合驱界面性能的影响。结果显示,Zeta电位的绝对值随着无机盐浓度的增高而增大;无机碱中,碳酸根离子降低界面张力效果最好,氢氧根次之,碳酸氢根最差;阳离子中,钾离子降低界面张力效果最好,其次是钠离子,镁离子会略微提高界面张力,钙离子则会大幅度提高界面张力;阴离子中,与硫酸根相比,氯离子能更好地降低界面张力。通过以上研究,确定了Q站污水处理站外排水更适合三元复合驱配液。     

Sulfuric acid recovery from rare earth sulphate solutions by diffusion dialysis

1 Introduction As an important industrial chemical, sulfuric acids are widely used in metallurgical and chemical processes, in which some waste solutions containing free sulfuric acids and metallic ions are therefore produced[1, 2]. If these waste acids …     

新型防雷及抗干扰方法在电铲控制系统的应用

电铲是采区主要采掘设备,其弱电控制系统是电铲正常可靠运行的关键。由于雷击或电磁干扰造成弱电控制系统装置的损坏或工作异常等故障,已成为影响电铲安全正常运行的重要因素。针对现有电铲控制系统防雷抗干扰现状、存在的问题及影响,研究了一种新型防雷抗干扰方法,并分析了其在电铲弱电控制系统中的应用和实施效果。实际运行表明,新型防雷抗干扰方法能够有效提高电铲弱电控制系统防雷及抗干扰能力,对电铲及其他弱电控制系统防雷抗干扰的研究和应用具有积极的现实意义,且有着很好的推广价值。     

Nanocomposites of CsPbBr3 perovskite quantum dots embedded in Gd2O3:Eu3+ hollow spheres for LEDs application

Gd₂O₃:Eu³⁺@CsPbBr₃ quantum dots (QDs) mesoporous hollow nanocomposites with good luminescent properties and high stability were built. Among which, the hollow Gd₂O₃:Eu³⁺ spheres and CsPbBr₃ QDs were prepared by urea homogeneous precipitation and hot-injection method, respectively. Finally, the Gd₂O₃:Eu³⁺@CsPbBr₃ QDs shell–core compounds were constructed through mechanical stirring. The structure, morphology, stability and luminescent properties were studied by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry/thermogravity (DSC/TG), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), photoluminescence excitation/photoluminescence (PLE/PL) and life decay tools. Compared to the original CsPbBr₃ QDs, Gd₂O₃:Eu³⁺@CsPbBr₃ QDs display better photostability, thermal stability and current stability. The resulting Gd₂O₃:Eu³⁺@CsPbBr₃ QDs composite exhibits good yellow emission. The Gd₂O₃:Eu³⁺@CsPbBr₃ QDs mixed silicone resin was directly coated on the blue LED chip, then the w-LED device with the color coordinate of (0.31, 0.32) was successfully assembled. The Gd₂O₃:Eu³⁺@CsPbBr₃ QDs compounds with excellent luminescent properties and stability are expected to be widely used in lighting and display areas.     

Ce对440C不锈轴承钢夹杂物演变的影响

为探究稀土Ce对440C不锈轴承钢中夹杂物的改性作用,利用实验室MoSi₂电阻炉对440C不锈轴承钢进行稀土Ce处理,采用OM、SEM等系统分析了Ce的添加对440C不锈轴承钢脱氧及夹杂物演变的影响。结果表明,随着Ce加入量的增加,其收得率逐渐升高。Ce的加入使钢中TO质量分数由0.002 5%降低至0.001 2%。未加入Ce的钢中夹杂物主要为Al₂O₃、MnS以及镁铝尖晶石;加入质量分数为0.011 5%的Ce后,夹杂物被改性为以Ce-Al-O为主的夹杂物;当Ce的添加量达到0.036 4%时,夹杂物被完全改性为Ce-O-S夹杂物。适量的Ce可以降低夹杂物尺寸及面积比例,但过量加入会使夹杂物尺寸变大。在本试验条件下,当Ce质量分数为0.011 5%时,钢中夹杂物细小弥散效果最明显。以上结论可为Ce在高碳铬不锈轴承钢中的应用提供参考。     

耐腐蚀摩托艇ADC12-0.5La铝合金微观组织及制备

为改善ADC12铝合金的耐腐蚀性能,通过超声熔铸法制备ADC12-0.5La铝合金,并利用光学显微镜、扫描电镜、能谱分析仪、硬度计、浸泡腐蚀试验和电化学工作站研究了T6热处理和稀土La改性对ADC12铝合金的微观组织、硬度和耐腐蚀性能的影响。结果表明,T6态ADC12-0.5La铝合金微观组织明显细化,α-Al尺寸减小,形貌变圆整,共晶Si相和AlFeMnSi相细化为短棒状。相比于ADC12铝合金,T6态ADC12-0.5La铝合金硬度达到117.7HV,提高了26.8%,腐蚀电流密度降低了10.7%,腐蚀电位上升了64.4%,腐蚀速率降低了54.4%,腐蚀表面平坦且光滑,表现为较轻微的晶间腐蚀。T6态ADC12-0.5La铝合金提高了腐蚀电位,Al-La-Cu稀土相阻碍了电子移动,铝合金的耐腐蚀性能得到大幅度提高。     

Effects of blending on surface characteristics of copper corrosion products in drinking water distribution systems

Copper scales formed over 6-months during exposure to ground, surface and saline waters were characterized by EDS, XRD and XPS. Scale color and hardness were light red-brown-black/hard for high alkalinity and blue-green/soft for high SO₄ or Cl waters. Cl was present in surface or saline copper scales. The Cu/Cu₂O ratio decreased with time indicating an e transfer copper corrosion mechanism. Cu₂O, CuO, and Cu(OH)₂ dominated the top 0.5-1 A° scale indicating continuous corrosion. Cu₂O oxidation to CuO increased with alkalinity, and depended on time and pH. Total copper release was predicted using a Cu(OH)₂ model.