The smooth fractionator

A modification of the general fractionator sampling technique called the smooth fractionator is presented. It may be used in almost every situation in which sampling is performed from distinct items that are uniquely defined, often they are physically separated items or clusters like pieces, blocks, slabs, sections, etc. To each item is associated a ‘guesstimate’ or an associated variable with a more‐or‐less close – and possibly biased ? relationship to the content of the item. The smooth fractionator is systematic sampling among the items arranged according to the guesstimates in a unique, symmetric sequence with one peak and minimal jumps. The smooth fractionator is both very simple to implement and so efficient that it should probably always be used unless the natural sequence of the sampling items is equally smooth. So far, there is no theory for the prediction of the efficiency of smooth fractionator designs in general, and their properties are therefore illustrated with a range of real and simulated examples. At the cost of a slightly more elaborate sampling scheme, it is, however, always possible to obtain an unbiased estimate of the real precision and of some of the variance components. The only real practical problem for always obtaining a high precision with the smooth fractionator is specimen inhomogeneity, but that is detectable at almost no extra cost. With careful designs and for sample sizes of about 10, the sampling variation for the primary, smooth fractionator sampling step may in practice often be small enough to be ignored.     

提高特高含水期油藏采收率的方法及应用效果

针对胜索油田二区9-10单元的层间非均质和平面非均质性，运用水动力学方法，采用周期注水及增压注水改善单元的水驱油效果。经过6a的实施，单元的开发形势趋好，单元采收率提高9.62%，增加可采储量341.5kt，对同类型非均质性油藏改善水驱油效果，提高最终采收率具有借鉴意义。     

通过薄弱环节分析提高织造效率

通过改善织物质量和提高织造效率可对企业的经济效益做出重要贡献。借助于一个有针对性的企业分析能确定企业现状并在此基础上得出改进的措施。这些任务可由组成“纺织技术顾问团（TTC）”的有经验的工程师们完成。     

Modeling of the bulk free radical polymerization up to high conversion—three stage polymerization model. II. Number-average molecular weight and apparent initiator efficiency

The equations for predicting the number-average molecular weight are derived on the basis of the three stage polymerization model (TSPM) in this paper. By applying the equations, a plotting approach is proposed to determine the apparent initiator efficiency defined as f[(α_td+1)/2] and the constant of chain transfer to monomer, where f is the initiator efficiency and α_td denotes the fraction of the termination rate constants by disproportionation. Using the approach to plot the experimental data in the literature, it is found that the chain transfer to monomer can be neglected for both methylmethacrylate (MMA) and styrene (St) polymerizations, but it can exert a significant effect on ethylmethacrylate (EMA) polymerization. In addition, the apparent initiator efficiency is found to be independent of reaction temperature and initiator concentration at each stage. The values of f[(α_td+1)/2] at gel effect stage are slightly reduced as compared with that at low conversion stage for MMA and EMA polymerizations. However, it decreases significantly at gel effect stage for St polymerization. Using the equations derived and the apparent initiator efficiencies obtained from TSPM plots, the number-average molecular weights at different conversions can be predicted. Comparisons show that the agreement between predictions and experimental data is satisfactory.     

确定异常高压气藏地质储量和可采储量的新方法

基于文献[1]的定容，封闭，异常高压气藏的物质平衡方程式，提出了确定异常高压气藏原始地质储量，可采储量和采收率的新方法，通过实例的应用和对比表明，提供的新方法是适用的有效的。     

浅谈城市照明监控系统的开发设计

介绍LEAD-2000城市照明监控制系统的设计探索及运行效果。     

GL—2型Φ600mm螺旋选别攀枝花钛铁矿生产实践

攀矿选钛厂设计采用传统的螺旋选矿设备ＦＬＸ一１型φ６００ｍｍ螺旋选矿机和φ１２００ｍｍ螺旋溜槽，从选矿（铁）厂磁选尾矿物料中回收原生粒状钛铁矿积累了多年生产实践经验。而广东有色金属研究院研制的ＧＬ一２型φ６００ｍｍ螺旋选矿机具有处理能力大、分选效率高、选别粒级宽、不需冲洗水及占地面积小等特点，有取代选钛厂目前使用的螺旋选矿设备之趋势。     

多缝式烧嘴点火器在攀钢烧结生产中的应用

多缝式烧嘴点火器具有燃烧效率高，火焰长度易调，炉膛温度分布合理等优点，经工业试验证明，该点火器能满足攀钢烧结点火工艺要求，并有明显节能效果。     

耐火纤维喷涂技术的优越性及应用

详细介绍了耐火纤维喷涂技术及施工等各方面的优越性。同时说明耐火纤维喷涂技术,在大庆石化公司炼油厂润滑油白土装置扩建改造中加热炉炉衬上的应用及取得的明显节能效果。     

合理选用过剩空气系数的重要性分析

通过分析过剩空气系数过大或过小时加热炉多方面的影响,强调了合理选用过剩空气系数的重要性,并提出了控制措施。