UV法测定聚甲基丙烯酸酯纳米粒中胰岛素的包封率

建立一种简便易行的测定聚甲基丙烯酸酯胰岛素纳米粒中游离胰岛素含量方法.用Nanosep OD100C33超滤膜分离纳米粒和游离药物,在276 nm处测定药物的吸光度,建立胰岛素含量测定方法,并对线性、回收率、精密度等指标进行考察,最后测定各种胰岛素和载体比例混合的纳米粒的包封率.结果发现,该超滤膜能较好地分离纳米粒和游离的药物,在0.11～1.10 u/mL范围内,药物在276 nm的吸光度和浓度存在良好的线性关系(r=0.999 8),线性方程为A=0.868 8C-0.001 6,高、中、低3种浓度的回收率和精密度良好.该方法操作简单、结果可靠,可用于胰岛素纳米粒中药物包封率的测定.     

提高加热炉热效率措施的探讨

对本厂常减压装置提高加热炉热效率采取的措施进行了分析和总结     

Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

Numerical Modeling of Silicon Photodiodes for High-Accuracy Applications Part I. Simulation Programs

The suitability of the semiconductor-device modeling program PC-1D for high-accuracy simulation of silicon photodiodes is discussed. A set of user interface programs optimized to support high-accuracy batch-mode operation of PC-1D for modeling the internal quantum efficiency of photodiodes is also described. The optimization includes correction for the dark current under reverse- and forward-bias conditions before calculating the quantum efficiency, and easy access to the highest numerical accuracy available from PC-1D, neither of which is conveniently available with PC-1D’s standard user interface.     

矿用立式旋风水膜除尘器除尘性能的试验研究

本文通过对立式旋风水膜除尘器除尘性能的模型试验,揭示了几个主要参数对其除尘性能的影响,确定了合理的取值范围,对该种除尘器的设计和应用提供了依据。     

Energy efficiency, carbon emissions and economic development in Venezuela

Venezuela's vast natural resource base has largely shaped the nation's economic and energy-use patterns. Major opportunities exist for improving the efficiency of energy use in Venezuela and, consequently, restraining the growth of energy-related carbon emissions. This paper presents a detailed report of one potential development path for Venezuela and estimates the ensuing levels of energy demand and CO₂ emissions associated with pursuing this path through the year 2025. The results indicate that by adopting a development strategy that incorporates structural changes in the economy, fuel-switching measures and improved end-use efficiencies, Venezuela can introduce energy efficiency and carbon restraints as part of its economic development process.     

Policies to reduce energy use and carbon emissions in the UK

The UK differs from may other industrialized nations in that its carbon dioxide (CO₂) emissions from energy use have declined in recent years despite relatively rapid economic growth. In all sectors but transport, substantial reductions have already occurred in the level of carbon emissions per unit of GDP output. At the same time, a number of official and unofficial studies have pointed out that the UK has one of the largest remaining potentials amongst comparable industrialized countries for achieving further CO₂ reductions through the implementation of cost-effective energy efficiency and fuel switching measures. This paper discusses past and present patterns of energy use and carbons emissions in the UK. The analysis then examines historical trends in UK energy policy and presents policy options for further reducing the UK's energy-use and carbon emissions in the future.     

螺旋翅片管的换热计算

本文引入区域平均表面传热系数的概念。在实验研究的基础上进行了肋基和肋端温度分布预测及肋片换热数值计算。     

光催化氧化后四环素的分解率与COD去除率之间关系的探讨

以粉状无机半导体（ＺｎＯ）为催化剂，探讨了水溶液中四环素经光催化氧化分解率和ＣＯＤ去除率之间的关系。实验表明，在本实验中四环素的分解率和ＣＯＤ去除率之间有较好的正相关性。当反庆系统中有足量的活性催化剂和足够的光照时间时，绝大部分四环素将被较彻底地氧化分解成ＣＯ２，这不仅有助于光催化反应机理的研究，助于今后在环保中的实际应用。     

铯原子激光共振电离

用Ｎｄ：ＹＡＧ及其泵浦的染料激光进行铯原子三步共振电离。求解了非饱和共振过程速率方程，计算出基态和激发态共振吸收截面，给出电离效率分别与激发电离速率以及作用时间的变化关系，得到饱和激发电离的流量条件和通量条件。