A NEW ELECTROMAGNETIC IMAGING SCHEME

ＡＮＥＷＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＩＭＡＧＩＮＧＳＣＨＥＭＥ①ＺｈａｎｇＲｏｎｇｆｅｎｇ，ＨｅＪｉｓｈａｎＣｏｌｅｇｅｏｆＲｅｓｏｕｒｃｅ，ＥｎｖｉｒｏｎｍｅｎｔａｎｄＣｉｖｉｌＥｎｇｉｎｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏ...     

工艺参数对电磁铸造铝板坯温度场的影响

采用数值方法模拟电磁铸造过程的温度场，详细讨论了各种工艺参数，如宽厚比，浇注温度，铸造速度，冷却水量，喷水位置，喷水孔分布，感应热等对铝板坯凝固过程和温度场分布的影响规律，为电磁铸造工艺参数设计提供可靠依据。     

NUMERICAL SIMULATION OF ALTERNATIVE HORIZONTAL LEVITATION ELECTROMAGNETIC CONTINUOUS CASTING（Ⅱ）

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＯＦＡＬＴＥＲＮＡＴＩＶＥＨＯＲＩＺＯＮＴＡＬＬＥＶＩＴＡＴＩＯＮＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧ（Ⅱ）￥ＺｈｕＳｈｏｕｊｕｎ；ＲｅｎＺｈｏｎｇｍｉｎｇ；ＤｅｎｇＫａｎｇ；Ｊｉａｎ...     

Continuous cleaning of A356 alloy melt using high frequency electromagnetic field

A set of device for electromagnetic separation (EMS) was designed and applied to process the continuous flowing melt. Tensile test was employed to compare effect of electromagnetic separation with that of the traditional processes. Compared with filtration by ceramic foam filter and process without filtration, multiple process combined with filtration and electromagnetic separation can effectively remove most of inclusions with diameter finer than 10μm in A356 alloy casting, hence improve its tensile properties. After being processed by electromagnetic filtration,the tensile strength of A356 scrap is enhanced by 8.27%, approaching the level of fresh A356 alloy.     

电磁成形中的测量

本文简要介绍了电磁成形中放电电流、管坯与线圈间隙中的磁场测量 ,以及管坯动态变形过程测量的各种方法。通过各种方法的比较分析 ,得出分流器法测放电电流、探测线圈法测感生磁场是切实可行的方法。金属坯料在电磁力作用下的变形过程可用撞针法和高速摄影的办法进行测量 ,每种方法各有其优势和适用范围 ,测量时 ,根据实际情况进行选用。     

电磁屏蔽涂料的发展现状及趋势

电子产品的日益普及使得电磁干扰成为一个突出问题,应用电磁屏蔽涂料是消除电磁干扰简单而有效的方法,本文介绍了电磁屏蔽涂料的组成、效能评价方法、技术思想、存在的问题以及发展趋势。复合型以及水性屏蔽涂料具有广阔的研发前景,高效能、宽频带、寿命长的电磁屏蔽涂料将会受到市场欢迎。     

Conductive Papers Containing Metallized Polyester Fibers for Electromagnetic Interference Shielding

Conductive papers were developed for preventing or reducing electromagnetic interference (EMI), and their shielding efficiency was evaluated. This type of conductive paper consists of wood pulp, synthetic pulp and metallized polyester fibers (0.5–2.0 mm long and 14 m in diameter) whose surfaces are coated with nickel alone (Ni-PET) or copper and nickel double layers (Ni-Cu-PET) by electroless plating. In this report, the effect of the characteristics of these metallized fibers, such as their conductivity, geometry and the concentration of fibers in paper, which lead to high efficiency for shielding effectiveness is discussed. For instance, one of the conductive papers (80 g/m2) which was prepared by mixing 40% Ni-Cu-PET and 60% synthetic polyethylene pulp showed over 40 dB shielding effectiveness between 10 MHz and 1 GHz.     

MAH接枝EPDM增韧PA66的研究

研究了MAH(马来酸酐)接枝三元乙丙橡胶(EPDM—g-MAH)对尼龙66(PA66)的增韧作用。利用SEM(扫描电镜)观察了共混体系的微观形貌(形态结构)，并运用小角激光散射(SALS)方法研究了EPDM的加入对PA66结晶性能的影响。结果表明，未接枝的EPDM与PA66的相容性很差，而EPDM—g—MAH与PA66相容性明显增加，EPDM-g—MAH粒子均匀分散在PA66中，共混体系力学性能有很大提高。随着EPDM—g—MAH用量的增加，PA66球晶尺寸变小，共混体系界面结合更加紧密。     

飞行器电磁窗耐雨蚀复合涂层的制备

研制了电磁窗用耐雨蚀底漆和耐雨蚀面漆，介绍了该配套涂料体系的制备工艺，并列举了其性能指标。讨论了耐雨蚀面漆中聚酯树脂、多元醇和颜料对其性能的影响，施工工艺对耐雨蚀涂层与底涂层之间配套性能的影响。     

镀锌层与氟碳漆涂层的相容性研究

在部分产品中,钢表面镀锌后表面再涂一层漆,其目的是为了增加耐腐蚀性能。但是锌可能会与漆层中的一些组份发生反应,降低漆膜性能。本文通过开展氟碳漆涂层和镀锌层湿热试验后性能测试研究,表明两者之间具有较好的相容性,可提高产品的防护性能。